journal article·2015-03

High temperature spectral selective coatings for solar thermal systems by laser sintering

Ankit A. Shah, Craig Ungaro, Mool C. Gupta

Publisher page

Abstract

Abstract Spectral selective coatings for solar thermal receivers have been fabricated by laser sintering of tungsten micro and nano particles on stainless steel substrate and show solar absorptance of ~90% at room temperature. The coatings remain stable after heat treatment at 650 °C in air for at least 36 h. A high figure of merit of ~50 has been achieved for laser sintered coatings. Two laser scans were performed at different energy densities, one to sinter nanoparticles and other to control surface morphology, so that high solar absorptance and low thermal emittance can be achieved. Laser sintering was carried out under atmospheric pressure that enabled the formation of a protective oxide layer that provided thermal stability to 650 °C. Solar thermal receivers in tower systems operate at high temperatures in air and laser sintering is a promising approach to fabricate spectral selective receiver coatings for this application.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Thermal Radiation and Cooling Technologies · Photovoltaic System Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. A. Ambrosini, T. Lambert, M. Bencomo, A. Hall, K. Every, N. Siegel, C. Ho, Proceedings of the ASME 2011, Fifth International Conference on Energy Sustainability, Washington DC, 7–10 August 2011, pp. 1–8.
2. Solar selective coatings for concentrating solar power central receivers
3. Review of physical vapor deposited (PVD) spectrally selective coatings for mid- and high-temperature solar thermal applications10.1016/j.solmat.2011.10.028 ↗
4. Fabrication and optimisation of highly efficient cermet-based spectrally selective coatings for high operating temperature10.1016/j.tsf.2009.03.191 ↗
5. Characterisation of CVD-tungsten–alumina cermets for high-temperature selective absorbers10.1016/S0927-0248(97)00219-5 ↗
6. Optical properties of higher and lower refractive index composites in solar selective coatings10.1016/S0927-0248(01)00045-9 ↗
7. Microstructure and spectral selectivity of Mo–Al2O3 solar selective absorbing coatings after annealing10.1016/j.tsf.2007.07.193 ↗
8. High efficiency Mo–Al2O3 cermet selective surfaces for high-temperature application10.1016/0927-0248(95)00078-X ↗
9. Recent progress in high-temperature solar selective coatings10.1016/S0927-0248(99)00136-1 ↗
10. High-temperature space-stable selective solar absorber coatings10.1364/AO.4.000917 ↗
11. A review of cermet-based spectrally selective solar absorbers10.1039/c3ee43825b ↗
12. Consolidation phenomena in laser and powder-bed based layered manufacturing10.1016/j.cirp.2007.10.004 ↗
13. A model for the interaction of near-infrared laser pulses with metal powders in selective laser sintering10.1007/s003390101139 ↗
14. Spectral selective surfaces for concentrated solar power receivers by laser sintering of tungsten micro and nano particles10.1016/j.solmat.2013.07.013 ↗
15. Infrared, spectral, directional-hemispherical reflectance of fused silica, Teflon polytetrafluoroethylene polymer, chrome oxide ceramic particle surface, Pyromark 2500 paint, Krylon 1602 paint, and Duraflect coating10.1364/AO.47.001389 ↗
16. The stability relations of the wolframite series
17. Solar selective absorbers based on two-dimensional W surface gratings with submicron periods for high-temperature photothermal conversion10.1016/S0927-0248(02)00364-1 ↗
18. Influence of microroughness on emissivity10.1063/1.1776634 ↗
19. Ultralow reflectance metal surfaces by ultrafast laser texturing10.1364/AO.49.005983 ↗
20. stability of reactive sputtered tungsten oxide coatings10.1016/j.surfcoat.2007.01.019 ↗
21. Black tungsten for solar power generation10.1063/1.4818711 ↗
22. A. Wazwaz, Accelerated heat degradation testing and characterization of nickel-pigmented aluminium oxide selective absorber, in: Second International Conference on the Palestinian Environment, 6 October 2009, pp. 38–46.
23. Use of sol–gel thin films in solar energy applications10.1016/0165-1633(86)90053-5 ↗
24. Conformal antireflective coatings on a textured tungsten surface10.1063/1.89852 ↗
25. Numerical study on spectral properties of tungsten one-dimensional surface-relief gratings for spectrally selective devices10.1364/JOSAA.22.001805 ↗
26. Taflove · 2005
27. Meep: a flexible free-software package for electromagnetic simulations by the FDTD method10.1016/j.cpc.2009.11.008 ↗
28. The real utility ranges of the solar selective coatings10.1016/j.solmat.2007.07.006 ↗
29. High performance solar-selective absorbers using coated sub-wavelength gratings10.1364/OE.18.005525 ↗