journal article·2010-03Open access

Dry fabrication process for heterojunction solar cells through in-situ plasma cleaning and passivation

M. Moreno, M. Labrune, P. Roca i Cabarrocas

Abstract

Abstract We have studied low temperature plasma processes (Tsub≤200 °C) for the efficient cleaning and passivation of c-Si wafers, aiming for fully dry fabrication of heterojunction solar cells. We have experimented with H2–SiF4 plasmas in a standard RF PECVD reactor in order to etch the native oxide from the c-Si wafer and a thin a-Si:H layer was deposited from SiH4 to passivate the c-Si surface. In-situ ellipsometry was used to optimize the process conditions for an efficient surface cleaning. Various plasma treatments were performed before a-Si:H deposition in order to reduce the surface recombination. Optimized process conditions resulted in high effective lifetime values (τeff≈1.55 ms), low effective surface recombination velocities (Seff≤9 cm s−1) and high implicit open circuit voltages (Voc≈0.713 V).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. European Photovoltaic Industry Association, Solar Generation V Report, (2008).
2. Very high efficiency silicon solar cells—science and technology10.1109/16.791982 ↗
3. Twenty-two percent efficiency HIT solar cell10.1016/j.solmat.2008.02.037 ↗
4. H.F.W. Dekkers, F. Duerinckx, L. Carnel, G. Agostinelli and G. BeaucarneCompany, , Plasma texturing processes for the next generations of crystalline Si solar cells, in: Proceedings of 21st European Photovoltaic Solar Energy Conference, Barcelona Spain, 2006, pp. 754–757.
5. IMEC, New promising method to fabricate ultra-thin crystalline Si wafers for solar cells. 〈http://www2.imec.be/imec_com/imec-reports-new-promising-method-to-fabricate-ultra-thin-silicon-solar-cells.php?year=2008&month=07〉.
6. Mechanism of HF etching of silicon surfaces: a theoretical understanding10.1103/PhysRevLett.65.504 ↗
7. S. Choi K. Jeong J. Choi K. Koo T. Cho H. Chun, A study on the removal of silicon native oxide for ULSI devices, in: Proceedings of the 4th Korea—Russia International Symposium on Science and Technology, Korea, 2000, vol. 3, pp. 381–387.10.1109/KORUS.2000.866118 ↗
8. Etch rates for micromachining processing—Part II10.1109/JMEMS.2003.820936 ↗
9. Etch rates for micromachining processing10.1109/84.546406 ↗
10. Reinhardt · 2007
11. Passivation of structured p-type silicon interfaces: effect of surface morphology and wet-chemical pre-treatment10.1016/j.apsusc.2008.03.022 ↗
12. I. Martin, B. Hoex, M.C.M. van de Sanden, R. Alcubilla,W.M.M. Kessels, The origin of emitter like recombination for inverted c-Si surfaces, in: Proceedings of the 23rd European Photovoltaic Solar Energy Conference EUPVSEC, Valencia Spain, 2008, pp. 1388–1392.
13. S. Dauwe, J. Schmidt, R. Hezel, Very low surface recombination velocities on p and n type silicon wafers passivated with hydrogenated amorphous silicon films, in Proceedings of IEEE Conference on Photovoltaic Specialists Conference No. 29, New Orleans, USA, 2002, pp. 1246–1249.10.1109/PVSC.2002.1190834 ↗
14. Measuring and interpreting the life time of silicon wafers10.1016/j.solener.2003.07.033 ↗
15. Applications of spectroscopic ellipsometry to micro-electronics10.1016/0040-6090(93)90069-2 ↗
16. Improvement of crystalline silicon surface passivation by hydrogen plasma treatment10.1063/1.1647702 ↗
17. Toward a better physical understanding of a-Si:H/c-Si heterojunction solar cells10.1063/1.3091283 ↗