journal article·2013-10Open access

First spectral emissivity study of a solar selective coating in the 150–600°C temperature range

I. Setién-Fernández, T. Echániz, L. González-Fernández, R.B. Pérez-Sáez, E. Céspedes, J.A. Sánchez-García, L. Álvarez-Fraga, R. Escobar Galindo, J.M. Albella, C. Prieto, M.J. Tello

Abstract

A complete experimental study of temperature dependence of the total spectral emissivity has been performed, for the first time, for absorber reflector selective coatings used in concentrated solar power (CSP) systems for energy harvesting. The coating consist of double cermet layers of silicon oxide with different amounts of molybdenum over a silver infrared mirror layer. The experimental measurements were carried out by a high accurate radiometer (HAIRL) with controlled atmosphere in the mid-infrared and for temperatures between 150 and 600 C. The spectral emissivity is nearly constant in this temperature range. Therefore, the temperature dependence of the total emissivity is given by Planck function. These results were compared with those obtained with the usual calculus using room temperature reflectance spectrum. Finally, the performance of the coating was analyzed by comparison of coated respect to non-coated stainless steel.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Thermal Radiation and Cooling Technologies · solar cell performance optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. C.E. Kennedy. Review of Mid-to-High-Temperature Solar Selective Absorber Materials. NREL/TP-520-31267. Available from: 〈http://www.nrel.gov/docs/fy02osti/31267.pdf〉.
2. Selective solar-absorbing surface coatings: optical properties and degradation
3. M. Nejati. Cermet based solar selective absorbers; further selectivity improvement and developing new fabrication technique, Ph.D.-Dissertation, Saarbrücken, 2008.
4. Optimization and microestructural analysis of electrochemically deposited selective solar absorber coatings10.1007/BF01117346 ↗
5. Structural and IR spectroscopy analysis of sol–gel processed CuFeMnO4 spinel and CuFeMnO4/silica films for solar absorbers10.1023/A:1008728717617 ↗
6. Spectral selective paint coatings preparation and characterization10.1016/S0927-0248(00)00367-6 ↗
7. A novel design in composites of various materials in solar selective coatings10.1016/S0927-0248(01)00108-8 ↗
8. Application of thin graded index films to solar absorbers10.1364/AO.16.001438 ↗
9. Computer simulation of the optical properties of high temperature cermet solar selective coatings10.1016/j.solener.2004.09.024 ↗
10. Thin films in phototermal solar energy conversion10.1016/0040-6090(82)90544-2 ↗
11. Review of physical vapor deposited (PVD) spectrally selective coatings for mid- and high-temperature solar thermal applications10.1016/j.solmat.2011.10.028 ↗
12. Recent progress in high-temperature solar selective coatings10.1016/S0927-0248(99)00136-1 ↗
13. Fabrication and optimisation of highly efficient cermet-based spectrally selective coatings for high operating temperature10.1016/j.tsf.2009.03.191 ↗
14. C.E. Kennedy, H. Price, Progress in development of high-temperature solar-selective coatings, NREL/CP-520-36997. in: Proceedings of the 2005 International Solar Energy Conference, ISEC'05, Orlando, Florida, USA, ISEC2005-76039, August 6–12, 2005.
15. Transparent conductors as solar energy materials: a panoramic review10.1016/j.solmat.2007.04.031 ↗
16. New experimental device for infrared spectral direction emissivity measurements in a controlled environment10.1063/1.2393157 ↗
17. Analysis of calibration methods for direct emissivity measurements10.1364/AO.49.002728 ↗
18. Analysis of the accuracy of methods for the direct measurement of emissivity10.1007/s10765-008-0402-4 ↗
19. Combined standard uncertainty in direct emissivity measurements10.1063/1.3431541 ↗
20. Infrared normal spectral emissivity of Ti–6Al–4V alloy in the 500–1150K temperature range10.1016/j.jallcom.2012.06.117 ↗
21. Modest · 2003
22. Armco iron normal spectral emissivity measurements10.1007/s10765-006-0081-y ↗