journal article·2004-10

The applicability of accelerated life testing for assessment of service life of solar thermal components

B. Carlsson, K. Möller, M. Köhl, M. Heck, S. Brunold, U. Frei, J.-C. Marechal, G. Jorgensen

Publisher page

Abstract

Abstract To achieve successful commercialisation of new advanced windows and solar facade components for buildings, the durability of these need to be demonstrated prior to installation by use of reliable and well-accepted test methods. In Task 27 Performance of Solar Facade Components of the IEA Solar Heating and Cooling Programme work has therefore been undertaken with the objective to develop a general methodology for durability test procedures and service lifetime prediction methods adaptable to the wide variety of advanced optical materials and components used in energy efficient solar thermal and buildings applications. As the result of this work a general methodology has been developed. The proposed methodology includes three steps: (a) initial risk analysis of potential failure modes, (b) screening testing/analysis for service life prediction and microclimate characterisation, and (c) service life prediction involving mathematical modelling and life testing. The applicability of the working scheme to be employed in the development of durability test procedures has been analysed for selective solar absorber surfaces and polymeric glazing materials in flat plate solar collectors. The examples show the great applicability of the general methodology for accelerated life testing. This will allow much shorter development cycle times for new products and will allow improvements to be identified and readily incorporated in new products prior to market introduction.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Photovoltaic System Optimization Techniques · Solar Thermal and Photovoltaic Systems · Building Energy and Comfort Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. B. Carlsson, K. Möller, M. Köhl, M. Heck, S. Brunold, J-M. Marechal, G. Jorgensen, General methodology of accelerated testing for assessment of service life of solar thermal components, Final Report of IEA Solar Heating and Cooling Task 27: Solar Facade Components - Performance, durability and sustainability of advanced windows and solar components for building envelopes, Project B1: Durability assessment methodology development, December 2004, Report to be ordered from SP Swedish National Testing and Research Institute, P.O.Box 857, SE-50115 Borås, Sweden.10.1016/j.solmat.2004.01.046 ↗
2. B. Carlsson, General methodology, in: A. W. Czanderna (Ed.), Performance and Durability Assessment of Optical Materials for Solar Thermal Systems, Elsevier Science, Amsterdam, 2004, in press.10.1016/B978-008044401-7/50012-2 ↗
3. G.B. Gaines, R.E. Thomas, G.C. Derringer, C.W. Kistler, D.M. Brigg, D.C. Carmichael, Methodology for designing accelerated aging tests for predicting life of photovoltaic arrays, Batelle Colombus Laboratories, Final Report ERDA/JPL-954328-77/1, 1977.
4. Overview of methodologies for prediction of service life
5. CIB W 80/RILEM 71-PSL, Final Report Materials and Structures, Vol. 19, No. 114, 1986.
6. ISO 15686 Building and constructed assets—Service life planning—Part 1: General principles, ISO International Standardization Organization Geneva, Switzerland, 2000.
7. ISO 15686 Building and constructed assets—Service life planning—Part 2: Service life prediction procedures, ISO International Standardization Organization Geneva, Switzerland, 2001.
8. B. Carlsson, U. Frei, M. Köhl, K. Möller, Accelerated life testing of solar energy materials—case study of some selective solar absorber coatings for DHW systems, International Energy Agency, Solar Heating and Cooling Programme Task X: Solar Materials Research and Development, Technical Report, SP- Report 1994:13, 1994.
9. B. Carlsson, Methods for service life prediction, Handbook in Life Time Technology, Swedish Defence Material Administration , 1993-06-21 (in Swedish) (Chapter 4,5).
10. R.E. Mc Dermott, R.J. Mikulak, M.R. Beauregard, R. Mikylak, The Basics of FMEA, Productivity Inc., 1996, ISBN: 0527763209.
11. K. Möller, Analytical techniques for studying solar materials degradation processes, in: A.W. Czanderna (Ed.), Performance and Durability Assessment of Optical Materials for Solar Thermal Systems, Elsevier Science, Amsterdam, 2004, in press.10.1016/B978-008044401-7/50019-5 ↗
12. Time transformation functions commonly used in life testing analysis
13. B. Carlsson, Mathematical models for service life prediction, Survey of service life prediction methods for materials in solar heating and cooling, International Energy Agency, Solar Heating and Cooling Programme Task X: Solar Energy Materials Research and Development, Technical Report, Swedish Council for Building Research Document D16, 1988.
14. Comparison between predicted and actually observed in-service degradation of a nickel pigmented anodized aluminium absorber coating for solar DHW systems10.1016/S0927-0248(99)00112-9 ↗
15. G. Jorgensen, S. Brunold, B. Carlsson, M. Heck, M. Köhl, K. Möller, Case study on polymeric glazing, in: A. W. Czanderna (Ed.), Performance and Durability Assessment of Optical Materials for Solar Thermal Systems, Elsevier Science, Amsterdam, 2004, in press.10.1016/B978-008044401-7/50026-2 ↗
16. G. Jorgensen, C. Bingham, J. Netter, R. Goggin, A. Lewandowski, in: D. R. Bauer, J. W. Martin (Eds.), Service Life Prediction of Organic Coatings, A Systems Approach; ACS Symposium Series 722, American Chemical Society, Oxford University Press, Washington DC, 1999, pp. 170–185.10.1021/bk-1999-0722.ch011 ↗