Metal-oxide broken-gap tunnel junction for copper indium gallium diselenide tandem solar cells
Source abstract
Abstract
Abstract A metal-oxide broken-gap heterojunction between p-Cu2O and n-In2O3 is proposed and studied for use as a tunnel junction in polycrystalline CuIn1−xGaxSe2 (CIGS) based tandem solar cells using numerical device simulation. Specifically, a tandem solar cell with a CuGaSe2 (CGS) absorber top cell and a CuInSe2 (CIS) absorber bottom cell was considered. The ballistic transport model explains well the carrier transport in the broken-gap heterojunction. Broken-gap heterojunctions provide linear current–voltage characteristics even if one side is lightly doped and the junction resistance is much lower than typical values of series resistance in solar cells. However, electron affinities of metal oxides for broken-gap band alignment may induce an energy barrier between the tunnel junction and the top and bottom solar cells, degrading performance. These barriers can be reduced using buffer layers. For example, NiO and graded In2O3–ZnO buffer layers are proposed beneath CGS top solar cell and above the CIS bottom solar cell, respectively. With these buffer layers, the efficiencies of the top and bottom cells are 17.5% and 6.5% respectively. The modeled efficiency of the CGS/CIS tandem solar cell is 24.1% and there is virtually no significant efficiency loss due to the presence of the broken-gap junction.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Copper-based nanomaterials and applications · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Third generation photovoltaics: ultra-high conversion efficiency at low cost10.1002/pip.360 ↗
2. Photovoltaics power up10.1126/science.1169616 ↗
3. First Solar Annual Report: Phoenix, 2011.
4. 19.9%-efficient ZnO/CdS/CuInGaSe2 solar cell with 81.2% fill factor10.1002/pip.822 ↗
5. Detailed balance limit of efficiency of p–n junction solar cells10.1063/1.1736034 ↗
6. Solar cell efficiency tables (version 42)10.1002/pip.2404 ↗
7. III–V multijunction solar cells for concentrating photovoltaics10.1039/B809257E ↗
8. Sze · 2007
9. Diffusion of impurities in polycrystalline silicon10.1063/1.1660842 ↗
10. Comparison of Be and C diffusion in heavily doped polycrystalline GaAs10.1063/1.112794 ↗
11. Why can CuInSe2 be readily equilibrium-doped n-type but the wider-gap CuGaSe2 cannot10.1063/1.1830074 ↗
12. A phenomenological model for systematization and prediction of doping limits in II–VI and I–III–VI2 compounds10.1063/1.367120 ↗
13. D.L. Young, J. Abushama, R. Noufi, X. Li, J. Keane, T.A. Gessert, J.S. Ward, M. Contreras, M. Symko-Davies, T.J. Coutts, A new thin-film CuGaSe2/Cu(In,Ga)Se2 bifacial, tandem solar cell with both junctions formed simultaneously, in: Proceedings of 29th IEEE Photovoltaic Specialists Conference, 2002, pp. 608–611.10.1109/PVSC.2002.1190638 ↗
14. M. Symko-Davies, Status of high performance PV: polycrystalline thin-film tandems, in: Proceedings of 31th IEEE Photovoltaic Specialists Conference, 2005, pp. 410–413.10.1109/PVSC.2005.1488156 ↗
15. Formation of transparent and ohmic ZnO:Al/MoSe2 contacts for bifacial Cu(In,Ga)Se2 solar cells and tandem structures10.1016/j.tsf.2004.11.001 ↗
16. D.J.L. Brémaud, Investigation and Development of CIGS Solar Cells on Flexible Substrates and with Alternative Electrical Back Contacts, Zurich, 2009.
17. Novel device structure for Cu(In,Ga)Se2 thin film solar cells using transparent conducting oxide back and front contacts
18. Forrest Johnson, Sang Ho Song, Richard Liptak, Stephen A. Campbell, Sputtering of metal oxide tunnel junctions for tandem solar cells, in: Proceedings of the 39th IEEE Photovoltaic Specialist Conference, 2013.10.1109/PVSC.2013.6744337 ↗
19. J.J. Rembold, T.W. Curtis, J.T. Heath, D.L. Young, S.W. Johnston, W.N. Shafarman, Electronic defects and device performance in CuGaSe2 solar cells, in: Proceedings Materials Research Society Symposium, vol. 1012. Thin-Film Compound Semiconductor Photovoltaics, 2007, pp. 425–430.10.1557/PROC-1012-Y12-27 ↗
20. Influence of the Ga-content on the bulk defect densities of Cu(In,Ga)Se210.1016/S0040-6090(00)01710-7 ↗
21. Electronic properties of CuGaSe2-based heterojunction solar cells. Part I. Transport analysis10.1063/1.371903 ↗
22. Contreras · Prog. Photovolt.: Res. Appl. · 2012 · 20 · 84310.1002/pip.2244 ↗
23. A recombination analysis of Cu(In,Ga)Se2 solar cells with low and high Ga compositions10.1016/j.solmat.2014.01.047 ↗
24. Investigation of ZnO/CdS/CuInxGa1–xSe2 interface reaction by using hot-stage TEM10.1016/j.cap.2010.02.043 ↗
25. High-temperature degradation mechanism of Cu(In,Ga)Se2-based thin film solar cells10.1143/APEX.1.075002 ↗
26. H. Sugimoto, High efficiency and large volume production of cis-based modules, in: Proceedings of the 40th Photovoltaic Specialists Conference, Denver, 2014.10.1109/PVSC.2014.6925503 ↗
27. Improved performance in ZnO/CdS/CuGaSe2 thin-film solar cells10.1002/pip.516 ↗
28. J. Song, S.S. Li, L. Chen, R. Noufi, T.J. Anderson, O.D. Crisalle, Investigation of CdZnS buffer layers on the performance of CuInGaSe2 and CuGaSe2 solar cells, in: Proceedings of 4th World Conference on Photovoltaic Energy Conversion, 2006, pp. 534–537.10.1109/WCPEC.2006.279510 ↗
29. K. Nagaich, S. Campbell, E.S. Aydil, Wide band-gap CuIn1−xGaxSe2 based chalcopyrite absorbers for tandem cell applications, in: Proceedings of 37th IEEE Photovoltaic Specialists Conference, 2011, pp. 000425–000429.10.1109/PVSC.2011.6185984 ↗
30. P. Ersleva, G.M. Hanket, W.N. Shafarman, D.J. Cohen, Characterizing the effects of silver alloying in chalcopyrite CIGS with junction capacitance methods, in: MRS Spring Meeting MRS Proceedings, vol. 1165, 2009. 10.1557/PROC-1165-M01-07.10.1557/PROC-1165-M01-07 ↗
31. S. Karthikeyan, M. Sibakoti, R. Liptak, S.H. Song, J. Abrahamson, E.S. Aydil, S.A. Campbell, Challenges in deposition of wide band gap copper indium aluminum gallium selenide (CIAGS) thin films for tandem solar cells, in: Proceedings of 40th IEEE Photovoltaic Specialist Conference, 2014.10.1109/PVSC.2014.6925232 ↗
32. Transparent conductors – a status review10.1016/0040-6090(83)90256-0 ↗
33. New n-type transparent conducting oxide10.1557/mrs2000.149 ↗
34. Transparent conductors as solar energy materials: a panoramic review10.1016/j.solmat.2007.04.031 ↗
35. Limits to doping in oxides10.1103/PhysRevB.83.075205 ↗
36. Practical doping principles10.1063/1.1584074 ↗
37. In1−xGaxAs–GaSb1−yAsy heterojunctions by molecular beam epitaxy10.1063/1.89609 ↗
38. Determination of the (100) InAs/GaSb heterojunction valenceband discontinuity by xray photoemission core level spectroscopy10.1063/1.338270 ↗
39. Interface-induced optical and transport phenomena in type II broken-gap single heterojunctions10.1088/0268-1242/19/10/R03 ↗
40. Electrical characteristics of InAsSb/GaSb heterojunctions10.1063/1.97077 ↗
41. Ultra-low resistive GaSb/InAs tunnel junctions10.1088/0268-1242/26/7/075021 ↗
42. Electrical and optical properties of TCO–Cu2O heterojunction devices10.1016/j.tsf.2004.06.180 ↗
43. Reactive magnetron sputtering of Cu2O: dependence on oxygen pressure and interface formation with indium tin oxide10.1063/1.3592981 ↗
44. Facchetti · 2010
45. J. Song, S.S. Li, C.H. Huang, T.J. Anderson, O.D. Crisalle, Modeling and simulation of a CuGaSe2/Cu(In1−x,Gax)Se2 tandem solar cell, in: Proceedings of 3rd World Conference on Photovoltaic Energy Conversion, 2003, pp. 555–558.10.1016/S0038-1101(03)00289-2 ↗
46. M.W. Wang, Novel CdSe-based PV structure for high efficiency CdSe/CIGS tandem solar cells, in: Proceedings of 34th IEEE Photovoltaic Specialists Conference, 2009, pp. 000480–000493.10.1109/PVSC.2009.5411639 ↗
47. I.S.E. DESSIS, Manual Release: 9.5, Synopsys, Mountain View, 2004.
48. Experiments on Ge–GaAs heterojunctions10.1016/0038-1101(62)90115-6 ↗
49. On the possibility of obtaining MOSFET-like performance and sub-60-mV/dec swing in 1-D broken-gap tunnel transistors10.1109/TED.2010.2079250 ↗
50. Modeling of high-performance p-Type III–V heterojunction tunnel FETs10.1109/LED.2010.2041180 ↗
51. Measurement of isotype heterojunction barriers by CV profiling10.1063/1.91467 ↗
52. Tomizawa · 1993
53. S.H. Song, K. Nagaich, E. Aydil, R. Feist, R. Haley, and S.A. Campbell, Structure optimization for a high efficiency CIGS solar cell, in: Proceedings of the IEEE Photovoltaics Specialists Conference, Honolulu, 2010.10.1109/PVSC.2010.5614724 ↗
54. Experimental observation of negative differential resistance from an InAs/GaSb interface10.1063/1.103591 ↗
55. Limiting efficiencies for photovoltaic energy conversion in multigap systems10.1016/0927-0248(96)00015-3 ↗
56. Characterization of MoSe2 Thin Films10.1016/0040-6090(88)90032-6 ↗
57. Electronic level alignment at the deeply buried absorber/Mo interface in chalcopyrite-based thin film solar cells10.1063/1.2955532 ↗
58. R. Pasquarelli, M. Van Hest, A. Miedaner, C. Curtis, J. Perkins, R. O׳Hayre, D. Ginley, Solution deposition of amorphous IZO films by ultrasonic spray, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference, PVSC, 2010, pp. 2471–2473.10.1109/PVSC.2010.5614111 ↗
59. Secondary barriers in CdS–CuIn1−xGaxSe2 solar cells10.1063/1.1850604 ↗
60. Detailed balance limit of the efficiency of tandem solar cells
61. Magnetoabsorption oscillations and the Zeeman effect of excitons for forbidden interband transitions in Cu2O crystals10.1103/PhysRev.188.1294 ↗
62. Evaporated Sn doped In2O3 films: basic optical properties and applications to energy efficient windows10.1063/1.337534 ↗