journal article·2011-07

Progress in stability of organic solar cells exposed to air

Mohammad Tavakkoli, Rasul Ajeian, Moosa Nakhaee Badrabadi, Saeed Saleh Ardestani, Sayid Mohammad Hasan Feiz, Komeil Elahi Nasab

Publisher page

Abstract

Abstract In this paper, the stability of small-molecule organic solar cells based on copper phthalocyanine (CuPc) and fullerene (C 60 ) is investigated. The use of silver instead of aluminum as the metal electrode in these solar cells, with smaller grain size and grain boundaries as well as with more uniform grain size distribution in the film, results in significant improvement in the lifetime of the devices. The substantial role of silver in the protection of the cells against permeation of oxygen and/or water molecules into the organic thin films is confirmed. Substitution of a thin buffer layer (70 A) of bathophenanthroline (Bphen) for bathocuproine (BCP), sandwiched between C 60 and the cathode, makes considerable progress in the lifetime of the device.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Molecular Junctions and Nanostructures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. 4.2% efficient organic photovoltaic cells with low series resistances10.1063/1.1713036 ↗
2. Very-high-efficiency double-heterostructure copper phthalocyanine/C60 photovoltaic cells10.1063/1.1384001 ↗
3. Efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
4. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
5. Efficient tandem polymer solar cells fabricated by all-solution processing10.1126/science.1141711 ↗
6. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
7. Lifetimes of organic photovoltaics: combining chemical and physical characterization techniques to study degradation mechanisms10.1016/j.solmat.2006.04.009 ↗
8. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
9. Analysis of the failure mechanism for a stable organic photovoltaic during 10,000h of testing10.1002/pip.794 ↗
10. Lifetimes of organic photovoltaics: using TOF-SIMS and O2 isotopic labeling to characterize chemical degradation mechanisms10.1016/j.solmat.2005.03.004 ↗
11. Stability and photodegradation mechanisms of conjugated polymer/fullerene plastic solar cells10.1016/S0927-0248(99)00094-X ↗
12. The degradation of indium tin oxide/pentacene/fullerene/tris-8-hydroxy-quinolinato aluminum/aluminum heterojunction organic solar cells: by oxygen or moisture?10.1016/j.solmat.2010.01.006 ↗
13. The investigation of the stability and optimal encapsulation time for ITO/CuPc/C60/Al bilayer cells10.1016/j.solmat.2010.01.001 ↗
14. Air stable polymer photovoltaics based on a process free from vacuum steps and fullerenes10.1016/j.solmat.2008.01.013 ↗
15. Flexible organic P3HT: PCBM bulk-heterojunction modules with more than 1 year outdoor lifetime10.1016/j.solmat.2008.01.004 ↗
16. Small-molecule organic solar cells with improved stability10.1016/j.cplett.2005.09.052 ↗
17. Degradation of small-molecule organic solar cells10.1063/1.2422911 ↗
18. Improvement of stability for organic solar cells by using molybdenum trioxide buffer layer10.1016/j.tsf.2009.07.015 ↗
19. Influence of Alq3/Au cathode on stability and efficiency of a layered organic solar cell in air10.1016/j.solmat.2008.06.002 ↗
20. Stable small-molecule organic solar cells with 1,3,5-tris(2-N-phenylbenzimidazolyl) benzene as an organic buffer10.1016/j.tsf.2007.03.187 ↗
21. Influence of molecular architecture and intermixing on the photovoltaic, morphological and spectroscopic properties of CuPc–C60 heterojunctions10.1016/j.solmat.2004.02.027 ↗
22. Diffusion of O2 in C60 crystal by measuring the decay of electrical conductivity10.1063/1.1771819 ↗
23. Ambient effects on fullerene/copper phthalocyanine photovoltaic interface10.1063/1.3118580 ↗
24. Small molecular weight organic thin-film photodetectors and solar cells10.1063/1.1534621 ↗
25. Efficient photon harvesting at high optical intensities in ultrathin organic double-heterostructure photovoltaic diodes10.1063/1.126433 ↗
26. Utilization of copper phthalocyanine and bathocuproine as an electron transport layer in photovoltaic cells with copper phthalocyanine/buckminsterfullerene heterojunctions: thickness effects on photovoltaic performances10.1016/j.tsf.2006.04.046 ↗
27. On the role of bathocuproine in organic photovoltaic cells10.1002/adfm.200800815 ↗
28. Efficient organic photovoltaic devices using a combination of exciton blocking layer and anodic buffer layer10.1063/1.2363649 ↗
29. Role of buffer in organic solar cells using C60 as an acceptor10.1063/1.2695733 ↗
30. Stability of the interface between indium-tin-oxide and poly (3,4-ethylenedioxythiophene)/poly (styrenesulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
31. Water-induced degradation of polymer solar cells studied by H218O labeling10.1021/am800039w ↗
32. Origin of the open circuit voltage of plastic solar cells10.1002/1616-3028(200110)11:5<374::AID-ADFM374>3.0.CO;2-W ↗
33. Cathode dependence of the open-circuit voltage of polymer:fullerene bulk heterojunction solar cells10.1063/1.1620683 ↗
34. Oxygen effect on the interfacial electronic structure of C60 film studied by ultraviolet photoelectron spectroscopy10.1016/j.cplett.2007.04.080 ↗
35. Photoemission study of the electronic properties of in situ prepared copper phthalocyanine (CuPc) thin films exposed to oxygen and hydrogen10.1016/S0040-6090(01)00996-8 ↗