Insights gained from computer modeling of heterojunction with instrinsic thin layer “HIT” solar cells
Source abstract
Abstract
Abstract The detailed electrical–optical simulator ASDMP is used to model the measured output characteristics of heterojunction with intrinsic thin layer “HIT” cells on P- and N-type c-Si substrates. The parameters extracted from modeling are used to understand the relative performances of the two types of HIT structures, with particular emphasis on the defect states on the surface of the c-Si wafer ( N ss ), the minority carrier lifetime in the c-Si absorber, the recombination speeds at the contacts and the band discontinuities at the amorphous/crystalline interface. Except, where the band discontinuities are varied, we apportion one-third of the band offset to the conduction band and two-thirds to the valence band. We find that N ss on the front surface (facing the incoming light) of the P-c-Si wafer strongly influence the open-circuit voltage ( V oc ) and to some extent the fill factor (FF), while those on the rear face reduce mainly the current and FF in P-c-Si HIT cells. In N-c-Si HIT cells, the defect density on the front face of the c-Si wafer strongly affects cell performance, those on the rear face having little influence. The lifetime of the minority carriers in the c-Si wafer, also has some influence on cell performance. However, the surface recombination speeds (SRS) of the contacts have little influence down to 10 3 cm/s, except for the SRS of the holes at the contact that is the hole-collector. The amorphous/crystalline (a–c) valence band offset is influential in all cases; and in particular leads to S-shaped characteristics in N–c-Si HIT, except when this offset is reduced by a lower P-a-Si:H band gap or tunneling of holes takes place. Finally unlike N-type HIT, the transition from front to double HIT on P-c-Si, does not appreciably improve the solar cell output.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (7)
Show source-provided references
1. Criteria for improved open-circuit voltage in a-Si:H(N)/c-Si (P) front heterojunction with intrinsic thin layer solar cells
2. Defect states on the surfaces of a P-type c-Si wafer and how they control the performance of a double heterojunction solar cell10.1016/j.solmat.2008.06.015 ↗
3. T. Takahama, M. Taguchi, S. Kuroda, T. Matsuyama, M. Tanaka, S. Tsuda, S. Nakano, Y. Kuwano, High efficiency single- and polycrystalline silicon solar cells using ACJ-HIT structure, in: Proceedings of the 11th European PVSEC, Montreux, Switzerland, 1992, pp. 1057–1062.
4. T. Sawada, N. Terada, S. Tsuge, T. Baba, T. Takahama, K. Wakisaka, S. Tsuda, S. Nakano, High efficiency a-Si:H/ c-Si heterojunction solar cell, in Proceedings of the 1st World Conference on Photovoltaic Energy Conversion, 5–9 December 1994, Hawaii, USA, pp.1219–1224.10.1109/WCPEC.1994.519952 ↗
5. E. Maruyama, A. Terakawa, M. Taguchi, Y. Yoshimine, D. Ide, T. Baba, M. Shima, H. Sakata and M. Tanaka, Sanyo’s challenges to the development of high efficiency HIT solar cells and the expansion of HIT business, in: Proceedings of the 4th World Conference on Photovoltaic Energy Conversion, 9–12 May 2006, Hawaii, USA, pp. 1455–1460.10.1109/WCPEC.2006.279743 ↗
6. Band offsets and deep defect distribution in hydrogenated amorphousd silicon—crystalline silicon heterostructure10.1063/1.101664 ↗
7. Energy band discontinuities in a heterojunction of amorphous hydrogenated Si and crystalline Si measured by internal photoemission10.1063/1.98189 ↗