Effect of sodium on material and device quality in low temperature deposited Cu(In,Ga)Se2
Source abstract
Abstract
Abstract Sodium is known to play an important role for the performance optimization of Cu(In,Ga)Se 2 (CIGSe) thin film solar cells, i.e. it is found to significantly increase the open-circuit voltage ( V OC ). For this work CIGSe absorbers were produced in a low temperature deposition process on polyimide substrates with varying sodium content. In agreement with previous studies we find an increase of V OC and overall solar cell performance with increasing sodium content and a decrease of the overall performance for very high sodium content. At the same time time-resolved photoluminescence measurements indicate that the minority carrier lifetime decreases from 50 ns to about 5 ns for increasing sodium content in the absorber. This correlation was found to be valid for three different types of low-temperature CIGSe deposition processes. The results can be explained by an increase in deep defect density with increasing Na content, proportional to the increased net charge carrier density as measured by capacitance–voltage profiling. For very high sodium content this leads to an actual decrease in the overall performance of the solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. ZnO/CdS/CuInSe2 thin-film solar cells with improved performance10.1063/1.108867 ↗
2. The effect of NaF on Cu(In,Ga)Se2 thin film solar cells10.1016/S0927-0248(99)00089-6 ↗
3. Effects of NaF coevaporation on structural properties on Cu(In,Ga)Se2 thin films10.1016/S0040-6090(03)00246-3 ↗
4. Influence of Na on Cu(In,Ga)Se2 solar cells grown on polyimide substrates at low temperature: impact on the Cu(In,Ga)Se2/Mo interface10.1063/1.3340459 ↗
5. Effects on sodium on Cu(In,Ga)Se2-based thin films and solar cells10.1143/JJAP.36.732 ↗
6. Effects of Na on the electrical and structural properties of CuInSe210.1063/1.370534 ↗
7. Damp heat treatment of Cu(In,Ga)Se2 solar cells with different sodium content
8. Incorporation of Na in low-temperature deposition of CIGS flexible solar cells10.1557/PROC-1210-Q03-02 ↗
9. The influence of Na on low temperature growth of CIGS thin film solar cells on polyimide substrates10.1016/j.tsf.2008.10.085 ↗
10. Na in selenized Cu(In,Ga)Se2 on Na-containing and Na-free glasses: distribution, grain structure, and device performances10.1016/S0040-6090(00)01028-2 ↗
11. J.E. Granata, J.R. Sites, S. Asher, R.J. Matson, Quantitative incorporation of sodium in CuInSe2 and Cu(In,Ga)Se2 photovoltaic devices, in: Proceedings of the 26th Photovoltaic Specialists Conference (PVSC), Anaheim, CA, 30 September–3 October 1997, pp. 387–390, 10.1109/PVSC.1997.654109.10.1109/PVSC.1997.654109 ↗
12. Minority-carrier lifetime and efficiency of Cu(In,Ga)Se2 solar cells10.1063/1.122134 ↗
13. Recombination kinetics and stability in polycrystalline Cu(In,Ga)Se2 solar cells10.1016/j.tsf.2008.11.050 ↗
14. Flexible Cu(In,Ga)Se2 thin film solar cells for space application10.1016/j.tsf.2005.11.068 ↗
15. J.M.D. Kowalczyk, J. Perkins, J. Kaneshiro, N. Gaillard, Y. Chang, A. DeAngelis, S.A. Mallory, D. Bates, E. Miller, Measurement of the sodium concentration in CIGS solar cells via laser induced breakdown spectroscopy, in: Proceedings of the 35th photovoltaic Specialists Conference (PVSC), Honolulu, HI, 20–25 June 2010 , pp. 1742–1744, 10.1109/PVSC.2010.5615854.10.1109/PVSC.2010.5615854 ↗
16. K. Zajac, S. Brunner, C.A. Kaufmann, R. Caballero, H.W. Schock, A. Rahm, C. Scheit, H. Zachmann, F. Kessler, R. Wuerz, P. Schülke, Latest results of the german joint project “Flexible CIGSe thin film solar cells for space applications”, in: Proceedings of Photovoltaic Specialists Conference (PVSC), Honolulu, HI, 20–25 June 2010, pp. 16–19, 10.1109/PVSC.2010.5614100.10.1109/PVSC.2010.5614100 ↗
17. M. Gloeckler, A.L. Fahrenbruch, J.R. Sites, Numerical modeling of CIGS and CdTe solar cells: setting the baseline, in: Proceedings of 3rd World Conference on Photovoltaic Energy Conversion, Osaka, Japan, 10–18 May 2003, vol. 1, pp. 491–494, 10.1109/WCPEC.2003.1305328.
18. S. Puttnins, H. Kempa, S. Englisch, R. Karsthof, F. Daume, A. Rahm, A. Braun, M. Grundmann, Voltage dependent photocurrent in low-temperature deposited CIGSe solar cells, to be presented at EU PVSEC 2013, Paris, France, 30 September–4 October 2013, 3BV.6.49.
19. Blood · 1990
20. Bulk and metastable defects in CuIn1−xGaxSe2 thin films using drive-level capacitance profiling10.1063/1.1633982 ↗
21. Optical functions of chalcopyrite CuGaxIn1−xSe2 alloys10.1007/s003390100931 ↗
22. Pankove · 1971
23. Efficiency limitations of polycrystalline thin film solar cells: case of Cu(In,Ga)Se210.1016/j.tsf.2004.11.052 ↗
24. Scheer · 2011
25. Bube · 1992 · 267
26. Tunneling-enhanced recombination in Cu(In,Ga)Se2 heterojunction solar cells10.1063/1.122967 ↗