journal article·2011-11

Flexible substrates as basis for photocatalytic reduction of carbon dioxide

Jacob Jensen, Mette Mikkelsen, Frederik C. Krebs

Publisher page

Abstract

Abstract A photocatalytic system for converting carbon dioxide into carbon monoxide was designed and constructed. The system relies on thin films of the photocatalyst prepared at low temperature using spray coating. We formulated inks based on the well-known photocatalyst titanium dioxide and characterized the performance in this setting. Glass substrates were used for model studies with an active area of 100 cm2 and flexible substrates based on polyethyleneterphthalate (PET), polyethylenenaphtalate (PEN) and polyethylene (PE) with a similar area for prototypes of photocatalytic converters. The results from this new setup are presented and the challenges herein compared with other research results which address the sub processes involved—photoinduced degradation of polymers, decomposition of catalyst surfactant and inactivation of the catalyst efficiency by carbonaceous residues, etc.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Photocatalysis Techniques · TiO2 Photocatalysis and Solar Cells · Catalytic Processes in Materials Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. The teraton challenge. A review of fixation and transformation of carbon dioxide10.1039/B912904A ↗
2. Recent developments in photocatalytic water treatment technology: a review10.1016/j.watres.2010.02.039 ↗
3. Advances in heterogeneous photocatalytic degradation of phenols and dyes in wastewater: a review10.1007/s11270-010-0456-3 ↗
4. Photocatalytic water treatment: fundamental knowledge required for its practical application10.2166/wst.2004.0243 ↗
5. TiO2 photocatalysis and related surface phenomena10.1016/j.surfrep.2008.10.001 ↗
6. Self-cleaning coatings10.1039/b412803f ↗
7. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films10.1038/353737a0 ↗
8. Synthesis of mesoporous titanium dioxide by soft template based approach: characterization and application in dye-sensitized solar cells10.1039/b921360k ↗
9. Solar energy conversion by dye-sensitized photovoltaic cells10.1021/ic0508371 ↗
10. High efficiency dye-sensitized solar cell based on novel TiO2 nanorod/nanoparticle bilayer electrode10.2147/NSA.S11350 ↗
11. Photoreduction of CO2 to fuels under sunlight using optical-fiber reactor10.1016/j.solmat.2008.02.010 ↗
12. Photoreduction of carbon dioxide with H2 and H2O over TiO2 and ZrO2 in a circulated photocatalytic reactor10.1016/j.solmat.2007.06.003 ↗
13. The design and development of highly reactive titanium oxide photocatalysts operating under visible light irradiation10.1016/S0021-9517(02)00104-5 ↗
14. Artificial photosynthesis over crystalline TiO2-based catalysts: fact or fiction10.1021/ja101318k ↗
15. Rapid measurement of polymer photo-degradation by FTIR spectrometry of evolved carbon dioxide10.1016/j.polymdegradstab.2005.07.011 ↗
16. Novel flat panel reactor for monitoring photodegradation10.1179/026708304225019885 ↗
17. Low-temperature synthesis of soluble and processable organic-capped anatase TiO2 nanorods10.1021/ja036505h ↗
18. Comparison of the UV-degradation chemistry of polypropylene, polyethylene, polyamide 6 and polybutylene terephthalate10.1016/S0141-3910(99)00033-6 ↗
19. Photochemical degradation of poly(ethylene terephthalate). III. Determination of decomposition products and reaction mechanism10.1002/app.1972.070160118 ↗
20. Influence of titanium dioxide pigments on the thermal and photochemical oxidation of low density polyethylene film10.1016/0014-3057(92)90089-K ↗
21. Effect of carboxylic end groups on thermooxidative stability of PET and PBT10.1016/S0141-3910(98)00094-9 ↗
22. Brolly · Polym. J. Sci. Part B Polym. Phys. · 1966 · 34 B · 769
23. Kesting · 1985
24. J.F. Rabek, Photostabilization of polymers: principles and applications, Appl. Sci., 1990.10.1007/978-94-009-0747-8 ↗
25. Carbon dioxide formation during initial stages of photodegradation of poly(ethyleneterephthalate) (PET) films10.1179/174328408X323096 ↗
26. Quantitative investigation of the photodegradation of polyethylene terephthalate film by friction force microscopy, contact-angle goniometry, and X-ray photoelectron spectroscopy10.1021/am900250q ↗
27. Photochemical degradation of poly(ethylene terephthalate)-modified copolymer10.1016/S0032-3861(99)00580-7 ↗
28. Surface characterization of photodegraded poly(ethylene terephthalate). The effect of ultraviolet absorbers10.1016/j.polymer.2004.02.003 ↗
29. Spectroscopic characterization of the surface of iron oxide nanocrystals10.1021/cm051370v ↗
30. Effect of capping ligands on the synthesis and on the physical properties of the nanoparticles of LiTaO310.1016/j.jcrysgro.2007.05.056 ↗
31. Anatase TiO2 porous thin films prepared by sol–gel method using CTAB surfactant10.1007/s10971-006-0122-9 ↗
32. Combined in situ small- and wide-angle X-ray scattering studies of TiO2 nanoparticle annealing to 1023K10.1107/S0021889810041907 ↗
33. Cause of slow phase transformation of TiO2 nanorods10.1021/jp9086442 ↗
34. Synthesis and structural characterization of surface-modified TiO210.4028/www.scientific.net/AMR.129-131.154 ↗
35. On the coating of precipitated calcium carbonate with stearic acid in aqueous medium10.1021/la904914h ↗
36. Preparation, characterization and magnetic properties of nano-Fe3O4 and cobalt-doped nano-Fe3O4 by CO-precipitation method10.1142/S1793292010002116 ↗
37. A Fourier transform infrared (FTIR) and thermogravimetric analysis (TGA) study of oleate adsorbed on magnetite nano-particle surface10.1016/j.apsusc.2009.01.031 ↗
38. Influence of iron oleate complex structure on iron oxide nanoparticle formation10.1021/cm062948j ↗
39. Sol–gel nanoparticulate mesoporous films with enhanced self-cleaning properties10.1016/j.jphotochem.2010.06.029 ↗
40. Preparation of aluminum titanium pigments and its application in self-cleaning coating
41. A study into the self-cleaning surface properties—the photocatalytic decomposition of oleic acid10.1016/j.cattod.2010.11.030 ↗
42. Reactions of the hydrocarbon chain of fatty acids10.1021/cr60216a002 ↗
43. Thermal decomposition of surfactant coatings on Co and Ni nanocrystals10.1063/1.1633971 ↗
44. An ex situ methodology for characterization of coke by TGA and 13C CP-MAS NMR spectroscopy10.1016/S0926-860X(97)00231-7 ↗
45. CO2 splitting by H2O to CO and O2 under UV light in TiMCM-41 silicate sieve10.1021/jp040345u ↗
46. Study of adsorption phenomena on aluminium by interatomic Auger transition spectroscopy I. Initial oxidation of Al10.1016/0039-6028(78)90132-2 ↗
47. The surface properties of metal oxides. Part II. An infrared study of the adsorption of carbon dioxide on γ-alumina10.1039/J19690000410 ↗
48. A case study: surface chemistry and surface structure of catalytic aluminas, as studied by vibrational spectroscopy of adsorbed species10.1016/0920-5861(95)00163-8 ↗
49. Preparation and characterization of titania–alumina mixed oxides with hierarchically macro-/mesoporous structures10.1021/ie101697t ↗
50. CO2 capture using mesoporous alumina prepared by a sol–gel process10.1016/j.cej.2010.11.038 ↗
51. High surface area a-alumina. I. Adsorption properties and heats of adsorption of carbon monoxide, carbon dioxide, and ethylene10.1016/0926-860X(94)85049-6 ↗
52. Study of adsorption phenomena on aluminium by interatomic Auger transition spectroscopy. II CO adsorption onto Al10.1016/0039-6028(78)90133-4 ↗
53. Surface properties of metal oxides. Part I. Infrared studies of the adsorption and oxidation of carbon monoxide on alumina10.1039/j19670001910 ↗
54. In situ DRIFTS study of photocatalytic CO2 reduction under UV irradiation10.1007/s11705-009-0232-3 ↗
55. Photoinduced activation of CO2 on Ti-based heterogeneous catalysts: Current state, chemical physics-based insights and outlook10.1039/b822176f ↗