A novel copolymer from benzodithiophene and alkylsulfanyl-bithiophene: Synthesis, characterization and application in polymer solar cells
Source abstract
Abstract
Abstract We present the synthesis and characterization of a novel copolymer from benzodithiophene and alkylsulfanyl-bithiophene units, poly[4,8-bis(2-ethylhexyloxy)benzo[1,2-b:4,5-b′]dithiophene-alt-4,4′-bis(octylsulfanyl)-2,2′-bithiophene] (PolyS). The structural, electrochemical and photophysical properties of PolyS were investigated by gel permeation chromatography (GPC), thermogravimetric analysis (TGA), NMR, UV–vis, photoluminescence (PL) spectroscopy and cyclic voltammetry (CV). PolyS was used to fabricate bulk-heterojunction polymer solar cells (PSCs) in combination with the [60]PCBM and [70]PCBM (electron acceptors). The device realized using [70]PCBM shows a better current output due to the increased absorption of the blend film compared to the PolyS:[60]PCBM one. The power conversion efficiency of the best PSC realized is 2.3% under 100 mW/cm2 AM 1.5 G illumination.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Krebs · 2010
2. A brief history of the development of organic and polymeric photovoltaics10.1016/j.solmat.2004.02.021 ↗
3. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
4. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
5. Upscaling of polymer solar cell fabrication using roll-to-roll processing10.1039/b9nr00430k ↗
6. Product integration of compact roll-to-roll processed polymer solar cell modules: methods and manufacture using flexographic printing, slot-die coating and rotary screen printing10.1039/c0jm01178a ↗
7. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
8. Flexible, conjugated polymer–fullerene-based bulk-heterojunction solar cells: basics, encapsulation, and integration10.1557/jmr.2005.0399 ↗
9. Charge separation and photovoltaic conversion in polymer composites with internal donor/acceptor heterojunctions10.1063/1.359792 ↗
10. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor–acceptor heterojunctions10.1126/science.270.5243.1789 ↗
11. Donor polymer (PAT6)–acceptor polymer (CNPPV) fractal network photocells10.1016/S0379-6779(97)80251-2 ↗
12. Small band gap polymers for organic solar cells (polymer material development in the last 5 years)10.1080/15583720802231833 ↗
13. Correlation between oxidation potential and open-circuit voltage of composite solar cells based on blends of polythiophenes/fullerene derivative10.1063/1.1650878 ↗
14. Tuning the LUMO level of the acceptor to increase the open circuit voltage of polymer–fullerene solar cells: a quantum chemical study10.1016/j.solmat.2008.04.010 ↗
15. 6.5% Efficiency of polymer solar cells based on poly(3-hexylthiophene) and indene-c 60 bisadduct by device optimization10.1002/adma.201001339 ↗
16. Enhanced performance and stability of a polymer solar cell by incorporation of vertically aligned, cross-linked fullerene nanorods10.1002/anie.201103782 ↗
17. Bandgap and molecular energy level control of conjugated polymer photovoltaic materials based on benzo[1,2-b:4,5-b′]dithiophene10.1021/ma800820r ↗
18. Low band gap polymers based on benzo[1,2-b:4,5-b′]dithiophene: rational design of polymers leads to high photovoltaic performance10.1021/ma100051v ↗
19. Development of new semiconducting polymers for high performance solar cells10.1021/ja808373p ↗
20. Synthesis of a low band gap polymer and its application in highly efficient polymer solar cells10.1021/ja9064975 ↗
21. Efficient polymer solar cells based on the copolymers of benzodithiophene and thienopyrroledione10.1021/cm100417z ↗
22. Synthesis and photovoltaic properties of a copolymer of benzo[1,2-b:4,5-b′]dithiophene and bithiazole10.1021/ma1018654 ↗
23. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
24. Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in polymer solar cells10.1002/adma.201103006 ↗
25. Photovoltaic performance improvement of d–a copolymers containing bithiazole acceptor unit by using bithiophene bridges10.1021/ma201976t ↗
26. Polymerization and characterization of 4,4′-bis(alkylsulfanyl)-2,2′-bithiophenes10.1021/ma9813340 ↗
27. H. Martin, Z. Weimin, T. Steven, M. Ian, Substituted benzodithiophenes and benzoselenophenes, WO2008011957 (A1), 2008.
28. Directed metalation reactions. 8. Directed metalation of 3-mono- and 2,5-disubstituted thiophenes10.1021/jo00885a003 ↗
29. Alkylsulfanyl)bithiophene-alt-fluorene: π-conjugated polymers for organic solar cells10.1002/ejoc.201100738 ↗
30. Highly efficient solar cell polymers developed via fine-tuning of structural and electronic properties10.1021/ja901545q ↗
31. Cyclic and differential pulse voltammetric behavior of reactants confined to the electrode surface10.1021/ac50019a033 ↗
32. Regioregular poly(3-alkanoylthiophene): synthesis and electrochemical, photophysical, charge transport, and photovoltaic properties10.1002/pola.24254 ↗
33. Soluble P3HT-grafted carbon nanotubes: synthesis and photovoltaic application10.1021/ma100917p ↗
34. The absolute electrode potential: an explanatory note (recommendations 1986)10.1351/pac198658070955 ↗
35. Efficient methano[70]fullerene/MDMO-PPV bulk heterojunction photovoltaic cells10.1002/anie.200351647 ↗
36. Highly efficient organic thin-film solar cells based on poly(3-hexylthiophene) and soluble C70 fullerene derivative10.1143/JJAP.47.1230 ↗
37. Y. Li, Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption, Accounts of Chemical Research, 10.1021/ar2002446.
38. Solvation-induced morphology effects on the performance of polymer-based photovoltaic devices10.1002/1616-3028(200112)11:6<420::AID-ADFM420>3.0.CO;2-K ↗
39. The influence of the fullerene on the optical constants of the photoactive blend film of a polymer solar cell10.4028/www.scientific.net/AST.74.164 ↗