Flow, thermal and structural application of Ni-foam as volumetric solar receiver
Source abstract
Abstract
Open-cell nickel foams with 92% porosity and uniform pore size and distribution were used in this study. The main objective of this work was to evaluate the behaviour of Ni-foam, when treated as volumetric receivers under concentrated solar radiation while improving their oxidation resistance, in order to make them attractive for such applications. The experimental investigation showed that their efficiency was depending on both materials parameters and flow conditions, the latter affecting the pressure drop and the heat transfer behaviour. The microstructural characterisation of oxide surface morphologies formed on the open-cell Ni foams exposed to concentrated solar radiation is investigated by the use of SEM and EDXS. SEM observations revealed a rapid homogeneous oxidation in the Ni-foam with three different surface oxide structures formed in relation with the process temperature. A novel slurry-based process for aluminising nickel foams while retaining their geometrical properties is applied in order to develop an aluminide-nickel intermetallic coating on a Ni foam thus enhancing the oxidation resistance. Scanning electron microscopy and X-ray diffraction were applied to assess the effectiveness of the aluminising process and determine the optimum parameters of the procedure (slurry composition, holding temperature and time).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Heat and Mass Transfer in Porous Media · Nanofluid Flow and Heat Transfer · Heat Transfer Mechanisms
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Ashby · 2000
2. Degischer · 2002
3. Metal foams as compact high performance heat exchangers10.1016/j.mechmat.2003.02.001 ↗
4. Thermal analysis on metal-foam filled heat exchangers Part I: metal-foam filled pipes10.1016/j.ijheatmasstransfer.2005.12.012 ↗
5. Experimental analysis of the pressure drop and heat transfer through metal foams used as volumetric receivers under concentrated solar radiation10.1016/j.expthermflusci.2008.08.007 ↗
6. Innovation in concentrated solar power10.1016/j.solmat.2011.05.020 ↗
7. Volumetric receivers in solar thermal power plants with central receiver system technology: a review10.1016/j.solener.2011.02.002 ↗
8. Porous materials as open volumetric solar receivers: experimental determination of thermophysical and heat transfer properties10.1016/S0360-5442(03)00188-9 ↗
9. Aluminizing nickel foam by a slurry coating process10.1016/j.matlet.2009.02.069 ↗
10. Synthesis of nickel–aluminide foams by pack-aluminization of nickel foams10.1016/S0966-9795(01)00047-4 ↗
11. Synthesis, structure, and mechanical properties of Ni–Al and Ni–Cr–Al superalloy foams10.1016/j.actamat.2003.11.012 ↗
12. The physical and mechanical properties of NiAl (Overview no. 104)10.1016/0956-7151(93)90001-9 ↗
13. Stoloff · 1996
14. Review of the physical and mechanical properties of the B2 compound NiAl10.1179/095066093790326276 ↗
15. Pack aluminisation kinetics of nickel rods and foams10.1179/026708302225001804 ↗
16. M.S. Milaniak, D.J. Orzel, F.P. Lamm, D.E. Desaulniers, U.S. Patent 5,366,765, (1994).
17. The effect of heat transfer on the pressure drop through a heat exchanger for aero engine applications10.1016/j.applthermaleng.2008.03.034 ↗
18. Numerical development of a heat transfer and pressure drop porosity model for a heat exchanger for aero engine applications10.1016/j.applthermaleng.2010.02.021 ↗
19. Convective heat transfer in cross-flow
20. A new-eddy-viscosity model for high Reynolds number turbulent flows—model development and validation10.1016/0045-7930(94)00032-T ↗