journal article·2009-09

Physical understanding of the behavior of silver thick-film contacts on n-type silicon under annealing conditions

S. Kontermann, M. Hörteis, M. Kasemann, A. Grohe, R. Preu, E. Pink, T. Trupke

Publisher page

Abstract

High-efficiency silicon solar cells with evaporated front contacts and an oxide-passivated rear require post metallization annealing (PMA). In an industrial environment the evaporated front contacts are replaced by screen printed contacts for fast processing and cost reasons. The PMA conditions necessary for optimum rear side passivation can be inferior to such a front side metallization. In order to design a PMA supporting contact in future, this paper investigates what mechanism deteriorates the contact resistance of screen printed front side metallization during nitrogen PMA. Scanning electron microscopy (SEM) on samples with increased contact resistance reveals an altered microstructure at the silver–silicon contact interface that is proposed to impede current flow and hence increases the contact resistance. We present a model that describes the mechanism of contact deterioration during nitrogen PMA.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. E. Schneiderlöchner, A. Grohe, B. Fleischhauer, M. Hofmann, S.W. Glunz, R. Preu, G. Willeke, Status and advancement in transferring the laser-fired contact technology to screen-printed silicon solar cells, in: Proceedings of the 22nd European Photovoltaic Solar Energy Conference Barcelona, Spain, 2005, pp. 785–788.
2. Surface passivation of crystalline silicon solar cells: a review10.1002/1099-159X(200009/10)8:5<473::AID-PIP337>3.0.CO;2-D ↗
3. Characteristics of fast surface states associated with SiO2–Si and Si3N4–SiO2–Si structures10.1149/1.2412205 ↗
4. Surface recombination velocity of highly doped n-type silicon10.1063/1.363250 ↗
5. Chemistry of Si–SiO2 interfacetrap annealing10.1063/1.340317 ↗
6. S. Glunz, Master Thesis, Albert–Ludwigs Universität Freiburg, 1991.
7. Multicrystalline silicon solar cells exceeding 20% efficiency, progress in photovoltaics
8. G. Schubert, J. Horzel, S. Ohl, Investigations on the mechanism behind the beneficial effect of a forming gas anneal on solar cells with silver thick film contacts, In: Proceedings of the 21st EUPVSEC, Dresden, Germany, 2006, pp. 1460–1466.
9. S. Kontermann, A. Grohe, D. Erath, R. Preu, G. Willeke, Investigations on the influence of different annealing steps on silicon solar cells with silver thick film contacts, in: Proceedings of the 22nd European Photovoltaic Solar Energy Conference Milan, Italy, 2007, pp. 1556–1559.
10. Understanding and implementation of rapid thermal technologies for high-efficiency silicon solar cells10.1109/16.791984 ↗
11. S. Kontermann, A. Grohe, R. Preu, Detailed analysis of annealing silver front side contacts on silicon solar cells, in: Proceedings of the 33rd IEEE PVSC, San Diego, California, USA, 2008, article no. 441.10.1109/PVSC.2008.4922788 ↗
12. A.G. Aberle, S.R. Wenham, M.A. Green, A new method for accurate measurements of the lumped series resistance of solar cells, in: Proceedings of the 23rd IEEE Photovoltaic Specialists Conference, Louisville, Kentucky, USA, 1993, pp. 133–139.10.1109/PVSC.1993.347065 ↗
13. J. Dicker, Dissertation Thesis, Albert–Ludwigs-Universität Freiburg, 1998.
14. S. Glunz, Dissertation Thesis, Albert–Ludwigs-Universität Freiburg, 1995.
15. Spatially resolved series resistance of silicon solar cells obtained from luminescence imaging10.1063/1.2709630 ↗
16. E. Pink, T. Trupke, R.A. Bardos, M.D. Abbott, Y. Augarten, S. Kontermann, Fast series resistance imaging using photoluminescence, in: Proceedings of the 22nd European Photovoltaic Solar Energy Conference, Milan, Italy, 2007 pp. 381–385.
17. A. Goetzberger, B. Voß, J. Knobloch, Sonnenenergie: Photovoltaik, Teubner Studienbücher Physik, Stuttgart, 1994.10.1007/978-3-322-91881-9 ↗
18. Models for contacts to planar devices10.1016/0038-1101(72)90048-2 ↗
19. Obtaining the specific contact resistance from transmission line model measurements10.1109/EDL.1982.25502 ↗
20. G. Schubert, Dissertation Thesis, Universität Konstanz, 2006.
21. D.M. Huljic, C. Ballif, A. Hessler-Wyser, G. Willeke, Microstructural analyses of Ag thick-film contacts on n-type silicon emitters, in: Proceedings of the 3rd World Conference on Photovoltaic Energy Conversion, Osaka, Japan, 2003, pp. 83–86.
22. Silver thick-film contacts on highly doped n-type silicon emitters: structural and electronic properties of the interface10.1063/1.1562338 ↗
23. M.M. Hilali, B. To, A. Rohatgi, A review and understanding of screen-printed contacts and selective-emitter formation, in: Proceedings of the 14th Workshop on Crystalline Silicon Solar Cells and Modules NREL, Winter Park, Colorado, USA, 2004, pp. 109–116.
24. G. Grupp, D. Biro, G. Emanuel, R. Preu, F. Schitthelm, G. Willeke, Analysis of silver thick-film contact formation on industrial silicon solar cells, in: Proceedings of the 31st IEEE Photovoltaics Specialists Conference (PVSEC), Orlando, Florida, 2005, pp. 927–930.10.1109/PVSC.2005.1488376 ↗
25. K. Firor, S.J. Hogan, J.M. Barrett, R.T. Coyle, Series resistance associated with thick-film contacts to solar cells, in: Proceedings of the 16th IEEE Photovoltaic Specialists Conference, San Diego, California, USA, 1982, pp. 824–827.
26. The surface conductivity of lead glasses10.1088/0022-3727/15/6/019 ↗
27. Silver diffusion and defect formation in Si (111) substrate at elevated temperatures10.1016/S0254-0584(01)00529-6 ↗
28. Low-temperature migration of silicon through metal films—importance of silicon-metal interface10.1002/pssa.2210070212 ↗
29. Equilibrium solubility of silicon in silver10.1007/s11661-002-0216-0 ↗