pin double-heterojunction thin-film solar cell p-layer assessment
Source abstract
Abstract
Abstract The simplest realization of a pin double-heterojunction thin-film solar cell would consist of a lightly doped, moderate-bandgap absorber i-layer; a heavily doped, wide-bandgap n-layer window (cathode); and a heavily doped, wide-bandgap p-layer window (anode) in which the anode and cathode are electrically contacted by at least one transparent conductor. The focus herein is on p-layer interfacial assessment, which is accomplished using modern Schottky barrier and heterojunction theory and is directed to the analysis of p-windows for copper indium gallium diselenide (CIGS) and cadmium telluride (CdTe) thin-film solar cells. A p-type window layer serves as an electron reflector and also aids in the formation of an ohmic anode contact. Ohmic anode contacts are particularly difficult to form in CIGS and CdTe thin-film solar cells since these materials have very large ionization potentials, i.e., IP S = 5.65 (CIGS) and 5.78 V (CdTe) and significant interfacial screening, characterized by extremely small Schottky barrier interface parameters, i.e., S = 0.14 (CIGS) and 0.21 (CdTe). An ideal p-type window material would be heavily doped, p-type, and would have a wide bandgap, a large ionization potential, and a smaller charge neutrality level energy than that of the absorber layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Semiconductor materials and interfaces · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Cu(In,Ga)Se2 solar cells
2. Cu(InGa)Se2 solar cells
3. Chalcopyrite based solar cells
4. S. Siebentritt, U. Rau (Eds.), Wide-Gap Chalcopyrites, Springer, Berlin, 2006.10.1007/b105644 ↗
5. Cadmium telluride solar cells
6. Cadmium telluride solar cells
7. Cadmium telluride thin film solar cells: characterization, fabrication and modeling
8. Mönch · 2001
9. Transparent electronics: Schottky barrier and heterojunction considerations10.1016/j.tsf.2007.06.164 ↗
10. Band offsets of wide-band-gap oxides and implications for future electronic devices10.1116/1.591472 ↗
11. Schottky-barrier heights and the continuum of gap states10.1103/PhysRevLett.52.465 ↗
12. Acoustic deformation potentials and heterostructure band offsets in semiconductors10.1103/PhysRevB.35.6182 ↗
13. A.A. Demkov, L.R.C. Fonseca, E. Verret, J. Tomfohr, O.F. Sankey, Complex band structure and the band alignment problem at the Si-high-k dielectric interface, Phys. Rev. B 71 (2005) 195306/1–8.
14. Band structure lineup at I-III-VI2 Schottky contacts and heterojunctions
15. H. Vázquez, W. Gao, F. Flores, A. Kahn, Energy level alignment at organic heterojunctions: Role of the charge neutrality level, Phys. Rev. B 71 (2005) 041306/1–4.
16. A phenomenological model for systematization and prediction of doping limits in II-VI and I-III-VI2 compounds10.1063/1.367120 ↗
17. Semiconductors interfacing polymers for light emission10.1016/S0079-6786(99)00002-3 ↗
18. Effect of indium intercalation on various properties of MoSe2 single crystals10.1002/crat.200610814 ↗
19. Raman scattering and infrared reflectance in 2H-molybdenum(IV) selenide10.1143/JPSJ.49.1069 ↗
20. Gerischer · 1979
21. The absolute electrode potential: an explanatory note10.1351/pac198658070955 ↗
22. A.O. Pudov, M. Gloeckler, S.H. Demtsu, J.R. Sites, K.L. Barth, R.A. Enzenroth, W.S. Sampath, Effect of back-contact copper concentration on CdTe cell operation, 29th IEEE Photovoltaic Specialists Conference, 2002, pp. 760–763.10.1109/PVSC.2002.1190676 ↗
23. Dean · 1999
24. Transparent p-type conducting BaCu2S2 films10.1063/1.1485133 ↗
25. p-type conductivity in wide-band-gap BaCuQF (Q = S,Se)10.1063/1.1571224 ↗
26. P-type conductivity in transparent oxides and sulfide fluorides10.1016/S0022-4596(03)00095-1 ↗
27. H. Yanagi, J. Tate, S. Park, C.-H. Park, D.A. Keszler, M. Hirano, H. Hosono, Valence band structure of BaCuSF and BaCuSeF, Appl. Phys. Lett. 100 (2006) 083705/1–5.
28. R. Kykyneshi, D. H. McIntyre, J. Tate, C.-H. Park, D. A. Keszler, Electrical and optical properties of epitaxial transparent conductive BaCuTeF thin films deposited by pulsed laser deposition, Solid State Sci. 10 (2008) 921–927.10.1016/j.solidstatesciences.2007.10.005 ↗
29. J. Tate, private communication (2008).
30. Chalcogen-based transparent conductors10.1016/j.tsf.2007.10.073 ↗
31. Electrical conductivity control in transparent p-type (LaO)CuS thin films prepared by rf sputtering10.1063/1.1473667 ↗
32. Fabrication of heteroepitaxial thin films of layered oxychalcogenides LnCuOCh (Ln = La-Nd; Ch=S-Te) by reactive solid-phase epitaxy10.1557/JMR.2004.0273 ↗
33. H. Hiramatsu, K. Ueda, H. Ohta, M. Hirano, M. Kikuchi, H. Yanagi, T. Kamiya, H. Hosono, Heavy hole doping of epitaxial thin films of a wide gap p-type semiconductor, LaCuOSe, and analysis of the effective mass, Appl. Phys. Lett. 91 (2007) 012104/1–3.
34. Syntheses, crystal and electronic structure, and some optical and transport properties of LnCuOTe (Ln = La, Ce, Nd)10.1016/j.jssc.2006.09.014 ↗
35. A photoelectrochemical determination of the position of the conduction and valence band edges of p-type copper(II) oxide10.1063/1.330567 ↗
36. Optoelectronic properties of copper aluminum oxide (CuAlO2)10.1016/0022-3697(84)90101-X ↗
37. The optical bandgap and band-edge positions of semiconducting p-type copper yttrium oxide (CuYO2)10.1139/p85-215 ↗
38. Preparation and optoelectronic properties of semiconducting copper chromium oxide (CuCrO2)10.1016/0025-5408(86)90156-X ↗
39. The optical interband transitions of the semiconductor copper gallium oxide (CuGaO2)10.1002/pssa.2210940127 ↗
40. Optoelectronic properties of p- and n-type delafossite10.1016/0022-3697(87)90103-X ↗