Effect of ultra-thin polymer membrane electrolytes on dye-sensitized solar cells
Source abstract
Abstract
In-situ ultra-thin porous poly(vinylidene fluoride- co -hexafluoropropylene) P(VDF–HFP) membranes were prepared by a phase inversion method on TiO 2 electrodes coated with Ru N-719 dye. These membranes were then soaked in the organic liquid electrolyte to form the in-situ ultra-thin porous P(VDF–HFP) membrane electrolytes. Dye-sensitized solar cell (DSC) using the membrane electrolyte exhibited an open-circuit voltage ( V oc) of 0.751 V, a short-circuit current ( J sc) of 16.260 mA cm −2 and a fill factor (FF) of 0.684 under an incident light intensity of 1000 W m −2 yielding an energy conversion efficiency ( η) of 8.35%. The V oc, FF and η of the solar cell using the membrane electrolyte increased by about 5.8%, 2.2% and 5.7%, respectively, when compared with the corresponding values of a cell using liquid electrolyte. However, the J sc decreased by about 2.1%.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Advanced Nanomaterials in Catalysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.