journal article·2013-09

Combined electrochromic-transparent conducting coatings consisting of noble metal, dielectric and WO3 multilayers

G. Leftheriotis, E. Koubli, P. Yianoulis

Publisher page

Abstract

Abstract A computer code based on the characteristic matrix formulation and a Monte Carlo algorithm have been devised for the optical design of D/M/WO 3 combined electrochromic-transparent conducting coatings. When these coatings are incorporated into electrochromic devices, the WO 3 film serves a dual purpose: It anti-reflects the metal in the bleached state and becomes absorptive in the colored state (as a Li x WO 3 tungsten bronze). The optimum design was found to be Glass/ZnS (34 nm)/Ag (15 nm)/WO 3 (326 nm), with the WO 3 layer being thick to ensure adequate optical modulation. Simulation of the coating in the colored state revealed an asymmetry in its response related to the direction of the incoming radiation, with high absorptance in one direction and high reflectance in the opposite one. This feature was verified experimentally and it has not been observed in typical electrochromic devices. Substitution of the ZnS layer with WO 3 , of the Ag layer with Au, and addition of a 4th Al 2 O 3 protective layer were found to be feasible alternatives to the optimum design. Glass/WO 3 /Ag/WO 3 coatings have been fabricated by electron beam gun deposition. They are transparent in the visible ( T lum =57%), reflective in the infrared with emittance equal to 0.09 and electrically conductive ( R sheet =9 Ω). These coatings were incorporated into electrochromic devices of the type Glass/WO 3 /Ag/WO 3 /1 M LiCLO 4 –PC/SnO 2 :F/Glass. Such devices exhibit a transmittance contrast ratio of 10:1 at 550 nm for 90 mC/cm 2 of inserted charge density, and a coloration efficiency of about 30 cm 2 /C at 534 nm. They can also withstand more than 500 voltammetric coloration–bleaching cycles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Transition Metal Oxide Nanomaterials · Gas Sensing Nanomaterials and Sensors · ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Oxide electrochromics: an introduction to devices and materials10.1016/j.solmat.2011.08.021 ↗
2. Properties, requirements and possibilities of smart windows for dynamic daylight and solar energy control in buildings: a state-of-the-art review10.1016/j.solmat.2009.08.021 ↗
3. Transparent conductors as solar energy materials: a panoramic review solar energy10.1016/j.solmat.2007.04.031 ↗
4. Does mesoporosity enhance thin film properties? A question of electrode material for electrochromism of WO310.1039/b9nr00091g ↗
5. Integrated low-emittance-electrochromic devices incorporating ZnS/Ag/ZnS coatings as transparent conductors10.1016/S0927-0248(99)00101-4 ↗
6. Development of multilayer transparent conductive coatings10.1016/S0167-2738(00)00328-3 ↗
7. Advanced electrochromic devices based on WO3 thin films10.1016/S0013-4686(01)00393-0 ↗
8. Optical indices of electrochromic tungsten oxide10.1016/S0040-6090(97)00254-X ↗
9. Electrochromic interference filters fabricated from dense and porous tungsten oxide films10.1016/j.solmat.2010.10.026 ↗
10. WO3∕SiO2 composite optical films for the fabrication of electrochromic interference filters10.1364/AO.51.003346 ↗
11. Macleod · 2010 · 13
12. Optical constants of a cadmium sulfide film from 200 to 900nm10.1364/JOSAA.12.000769 ↗
13. Design of low emissivity systems based on a three-layer coating10.1016/S0022-3093(97)00130-0 ↗
14. Granqvist · 1995 · 147
15. Optical constants of the noble metals10.1103/PhysRevB.6.4370 ↗
16. The influence of deposition parameters on the optical properties and growth of ZnS films10.1016/0040-6090(83)90152-9 ↗
17. Determination of the optical constants of MgF2 and ZnS from spectrophotometric measurements and the classical oscillator method10.1364/AO.27.002549 ↗
18. Chopra · 1983 · 343
19. Deposition and optical properties of optimized ZnS/Ag/ZnS thin films for energy saving applications10.1016/S0040-6090(97)00250-2 ↗
20. ZnS/Ag/ZnS Nano-multilayer films for transparent electrodes in filat display applications10.1016/S0169-4332(01)00570-0 ↗
21. ZnS/Ag/ZnS coating as transparent anode for organic light emitting diodes10.1016/j.jlumin.2006.01.232 ↗
22. TiO2/Au/TiO2 multilayer thin films: novel metal-based transparent conductors for electrochromic devices10.1016/j.tsf.2009.02.158 ↗
23. Hunt · 2011
24. Development of photoelectrochromic devices for dynamic solar control in buildings10.1016/j.solmat.2010.07.030 ↗
25. 2012
26. Transparent heat-reflecting coatings based on highly doped semiconductors10.1016/0040-6090(81)90365-5 ↗
27. Study of WO3 films with textured surfaces for improved electrochromic performance10.1016/S0167-2738(00)00827-4 ↗