Effect of surface texturing by femtosecond laser on tantalum carbide ceramics for solar receiver applications
Source abstract
Abstract
Tantalum carbide, as a Ultra-High Temperature Ceramic, is known to be characterized by intrinsic spectral selectivity, which makes it attractive for novel high-temperature thermal solar absorbers. However, a weakness point of TaC is the solar absorbance, which, in absence of any treatment, is usually lower than that of other materials currently under development for solar absorber applications. In the present work we have investigated the effect of surface texturing by femtosecond laser machining on this superhard material. Laser-induced microstructural and optical property changes have been characterized in two samples with different starting roughness and for four laser treatments each, as a function of the accumulated laser fluence. As the interaction with the laser beam takes place and gets stronger, both surface and chemical composition changes appear. Optical properties are heavily affected: solar absorbance considerably increases, at a slight expense of spectral selectivity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Laser Material Processing Techniques · Heat Transfer Mechanisms · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. UHTCs: ultra high temperature ceramic materials for extreme environment applications
2. A. Bellucci, P. Calvani, E. Cappelli, S. Orlando, D. Sciti, R. Yogev, A. Kribus, D.M. Trucchi, Preliminary characterization of ST2G: solar thermionic-thermoelectric generator for concentrating systems, in: 2015/6/23, NANOFORUM 2014 Conference Proceedings, 1667, 020007, 2015.
3. Maximizing concentrated solar power (CSP) plant overall efficiencies by using spectral selective absorbers at optimal operation temperatures10.1016/j.solener.2015.07.023 ↗
4. A review of solar collectors and thermal energy storage in solar thermal applications10.1016/j.apenergy.2012.11.051 ↗
5. C.E. Kennedy, Review of Mid – to High-temperature Solar Selective Absorber Materials, National Renewable Energy Laboratory, Technical report, 2002, pp.1–51.10.2172/15000706 ↗
6. Ultra-refractory ceramics for high-temperature solar absorbers10.1016/j.scriptamat.2011.07.033 ↗
7. Hafnium and Tantalum Carbides for high temperature solar receivers10.1063/1.3662099 ↗
8. Spectrally selective ultra-high temperature ceramic absorbers for high-temperature solar plants
9. Ultra-High Temperature Ceramics for solar receivers: spectral and high-temperature emittance characterization
10. Suitability of ultra-refractory diboride ceramics as absorbers for solar energy applications10.1016/j.solmat.2012.10.004 ↗
11. Porous and dense Hafnium and Zirconium Ultra-High Temperature Ceramics for solar receivers10.1016/j.optmat.2013.08.020 ↗
12. Optical properties of boride ultrahigh-temperature ceramics for solar thermal absorbers
13. Tantalum diboride-based ceramics for bulk solar absorbers10.1016/j.solmat.2014.07.012 ↗
14. Optical properties of ZrB2 porous architectures10.1016/j.solmat.2015.09.068 ↗
15. Femtosecond laser treatments to tailor the optical properties of hafnium carbide for solar applications10.1016/j.solmat.2014.09.037 ↗
16. A. Bellucci, P. Calvani, E. Cappelli, S. Orlando, D. Sciti, R. Yogev, A. Kribus, D.M. Trucchi, Preliminary characterization of ST2G: solar thermionic-thermoelectric generator for concentrating systems. In: 2015/6/23, NANOFORUM 2014 Conference Proceedings. 1667, 020007, 2015
17. Processing, mechanical properties and oxidation behavior of TaC and HfC composites containing 15 vol% TaSi2 or MoSi210.1557/jmr.2009.0232 ↗
18. Sintering behavior, microstructure, and mechanical properties: a comparison among pressureless sintered ultra-refractory carbides10.1155/2010/835018 ↗
19. Compositional dependence of optical properties of zirconium, hafnium and tantalum carbides for solar absorber applications10.1016/j.solener.2016.02.045 ↗
20. Experimental methods for the preparation of selectively absorbing textured surfaces for photothermal solar conversion10.1016/0165-1633(80)90028-3 ↗
21. Laser beam machining – a review10.1016/j.ijmachtools.2007.10.017 ↗
22. Laser machining of structural ceramics—a review10.1016/j.jeurceramsoc.2008.11.010 ↗
23. Excimer laser surface processing of ceramics: process and properties10.1111/j.1151-2916.1993.tb03791.x ↗
24. Microstructure and Nanoindentation properties of surface textures obtained by laser machining and molding in silicon carbide10.1002/adem.201200214 ↗
25. Laser-induced surface drilling of silicon carbide10.1016/S0169-4332(01)00330-0 ↗
26. Excimer-laser ablation of aluminum nitride10.1557/JMR.1997.0029 ↗
27. Laser-induced microstructural changes and decomposition of aluminum nitride10.1557/JMR.1995.0054 ↗
28. Response of silicon carbide to high-intensity laser irradiation in a high-pressure inert gas atmosphere10.1557/JMR.1997.0022 ↗
29. Ceramic surface modifications induced by pulsed laser treatments10.1016/S0169-4332(99)00422-5 ↗
30. Laser processing of materials: fundamentals, applications and developments
31. Optical properties of femtosecond laser treated diamond10.1007/s00339-014-8311-9 ↗
32. Black diamond for solar energy conversion10.1016/j.carbon.2016.04.017 ↗
33. Femtosecond laser treatments to tailor the optical properties of hafnium carbide for solar applications10.1016/j.solmat.2014.09.037 ↗
34. Determination of irradiation parameters for laser-induced periodic surface structures10.1016/j.apsusc.2012.09.120 ↗
35. Simple technique for measurements of pulsed Gaussian-beam spot sizes10.1364/OL.7.000196 ↗
36. Femtosecond laser ablation of silicon–modification thresholds and morphology10.1007/s003390100893 ↗
37. Standard Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37° Tilted Surface, Active Standard ASTM G173. ASTM G173–03, 2012.