Characterization of high-photovoltage CuPc-based solar cell structures
Source abstract
Abstract
Abstract Organic solar cells of the configuration ITO/PEDOT:PSS/CuPc/PTCBI/Al (Indium Tin Oxide/poly(3,4-ethylenedioxythiophene): polystyrene sulfonic acid/Copper phthalocyanine/3,4,9,10-perylenetetracarboxylic bisbenzimidazole/Aluminum ) were investigated. A high open circuit voltage ( V OC ) of 1.15 V was obtained when the PTCBI layer was 7 nm thick. Lower V oc values were observed for the same structure with silver, copper and gold electrodes instead of aluminum. However, short-circuit current density ( J SC ) with these electrodes was much higher (4 mA/cm 2 ) than in the case of aluminum (0.12 mA/cm 2 ). Incorporating a 10 nm thick CdS interlayer between PTCBI and aluminum resulted in an increase in current density to 0.3 mA/cm 2 . Results were interpreted in terms of a modified CuPc/Al Schottky diode for the thin PTCBI case and a CuPc/PTCBI heterojunction for the thick PTCBI case. Also, the formation of a thin, protective aluminum oxide layer under the aluminum electrode was postulated. For devices with silver, copper and gold electrodes, absence of this protective layer was thought to be the cause of a relatively lower V oc and higher J SC .
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.