journal article·2013-01

In-situ synthesis of a cordierite-andalusite composite for solar thermal storage

Jianfeng Wu, Guanghui Leng, Xiaohong Xu, Kun Li, Xinbing Lao, Cheng Zhou

Publisher page

Abstract

Abstract An innovative thermal storage material, in-situ synthesised cordierite combined andalusite (Al2O3·SiO2), was prepared via semi-dry pressing followed by pressureless sintering. The samples were mainly composed of andalusite (the main raw material), with in-situ synthesised cordierite added to improve the thermal shock resistance. The results indicate that the formula L4 (70% andalusite, 13% talcum, 13% kaolin and 4% γ-Al2O3) sintered at 1400 °C has the best thermal stock resistance, physical properties and chemical properties. The L4 sample can withstand 30 thermal shock test cycles without cracking (wind cooling from 1100 °C to 25 °C), and the bending strength after the thermal shock cycle test increased 26.20% rather than decreasing. Other properties are as follows: apparent porosity: 22.95%; water absorption: 10.71%; bulk density: 2.14 g/cm3; bending strength: 92.74 MPa; coefficient of thermal expansion: 4.11×10−6/°C; specific heat capacity: 0.95 kJ·(kg K)−1; thermal conductivity coefficient: 0.58×10−2 cm2 s−1; and thermal conductivity: 1.17 W·(m K)−1. The examination of the phase composition indicates that cordierite, mullite, sillimanite, cristobalite and α-quartz are the main phase elements. Analysis of the microstructure shows that the cordierite crystals were formed during the sintering process and were dispersed evenly in the mullite crystals, which gave the samples a favourable thermal shock resistance. It was concluded that the ceramic material, a combination of cordierite and andalusite, is an excellent candidate for solar thermal storage material due to its high thermal shock resistance, temperature resistance and strength.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Nanofluid Flow and Heat Transfer

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. Review on storage materials and thermal performance enhancement techniques for high temperature phase change thermal storage systems10.1016/j.rser.2012.01.020 ↗
2. Experimental investigation on a combined sensible and latent heat storage system integrated with constant/varying (solar) heat sources10.1016/j.renene.2006.04.015 ↗
3. Corrosion effects between molten salts and thermal storage material for concentrated solar power plants10.1016/j.apenergy.2011.12.057 ↗
4. Effect of the processing on the production of cordierite-mullite composite10.1016/j.ceramint.2009.11.013 ↗
5. In situ reaction sintering and characterization of mullite-cordierite composites
6. Physico-mechanical, refractory properties and microstructure of in-situ mullite-cordierite composites
7. The transformation of andal—usite to mullite and silica: Part I. Transformation mechanism in [001] direction10.2138/am-2000-0712 ↗
8. Effects of alumina and zirconia addition on transformation of andalusite to mullite10.1179/174367609X414107 ↗
9. Manufacture of mullite substrates from andalusite for the development of thin film solar cells10.1016/S0955-2219(01)00315-6 ↗
10. Thermal expansions and chemical modification of cordierite10.1111/j.1151-2916.1980.tb09850.x ↗
11. The thermal shock resistance of solids10.1016/S1359-6454(98)00127-X ↗
12. Thermal expansion of extruded cordierite ceramic
13. A thermal-shock-resistance model for laminated ceramics and its validation10.1016/j.jeurceramsoc.2009.11.007 ↗
14. Conjunctive use of quantitative and qualitative X-ray diffraction analysis of soils and rocks for forensic analysis10.1016/j.forsciint.2004.03.017 ↗