journal article·2026-06Open access

Low-filled electrically conductive adhesives based on silver-coated glass and copper particles

Marianne Kronsbein, Leonhard Böck, Torsten Rößler, Norbert Willenbacher

Abstract

Replacing silver in solar module production is the hot topic in metallization and interconnection development. Whereas in metallization mainly silver-coated copper is utilized, the lower electrical requirements for cell interconnection, open up the opportunity to utilize particles with non-conductive cores as well. This study focuses on the development and characterization of an electrically conductive adhesive (ECA) for the shingled cell interconnection based on silver-coated glass and silver-coated copper particles, respectively. The formulated low-filled ECAs were stabilized against sedimentation using a halogen-based additive. The silver-coated glass particles show good compatibility with the utilized epoxy resin. Employing a mixture of silver-coated glass particles and silver flakes, the silver content in the ECA can be reduced to 25 wt% and the mechanical properties can be adjusted by the fraction of glass particles used. In shingled modules such an ECA shows the same stable performance as the reference based on pure silver particles. An ECA with only 7 wt% silver was formulated using silver-coated copper particles meeting all requirements for solar cell shingling. Shingled modules build from such an ECA show promising initial efficiency. Damp heat 500 was passed comparable to the silver reference, indicating oxidation stability. However, degradation during accelerated thermal cycling 200 is believed to originate from remaining issues with curing. This study shows, that by carefully adjusting polymer, particles and additives the silver consumption in ECAs can be significantly reduced without any losses in interconnection performance.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Nanomaterials and Printing Technologies · Material Properties and Applications · Electronic Packaging and Soldering Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. 2025
2. 2025
3. Lead-free electrical conductive adhesives for solar cell interconnectors
4. Cross testing electrically conductive adhesives and conductive back-sheets for the ECN back-contact cell and module technology10.1016/j.egypro.2015.03.301 ↗
5. Electrically conductive adhesives as cell interconnection material in shingled module technology
6. Materials characterization, conduction development, and curing effects on reliability of isotropically conductive adhesives10.1109/95.679028 ↗
7. 2025
8. Chu · 2024
9. Nagase CA
10. 2025
11. Holland Shielding Systems
12. Electrically conductive adhesives filled with surface modified copper particles
13. Preparation and performance of Ag-coated Cu flakes filled epoxy as electrically conductive adhesives10.1186/s40539-014-0010-9 ↗
14. Electrical property enhancement of electrically conductive adhesives through ag-coated-cu surface treatment by terephthalaldehyde and iodine10.1039/C5TC00593K ↗
15. Electrical properties of electrically conductive adhesives from epoxy and silver-coated copper powders after sintering and thermal aging10.1016/j.ijadhadh.2020.102785 ↗
16. Enhancement in electrical conductivity of pastes containing submicron Ag-coated Cu filler with palmitic acid surface modification10.1016/j.apsusc.2017.01.006 ↗
17. Electrical properties of conductive adhesives as affected by particle compositions, particle shapes, and oxidizing temperatures of copper powders in a polymer matrix10.1002/app.20670 ↗
18. The synergistic effect of micron spherical and flaky silver-coated copper for conductive adhesives to achieve high electrical conductivity with low percolation threshold10.1016/j.ijadhadh.2021.102988 ↗
19. Effect of time, temperature and composition on the performance of conductive adhesives made of silver-coated copper powder10.1016/j.ijadhadh.2022.103114 ↗
20. Microstructure, resistivity, and shear strength of electrically conductive adhesives made of silver-coated copper powder10.1016/j.microrel.2021.114400 ↗
21. Effect of flake silver-plated copper particles on the property enhancement of electrically conductive adhesives10.1039/D3CP00209H ↗
22. Less is more: enabling low-filled electrically conductive adhesives for shingled solar cell interconnection using the capillary suspension concept10.1016/j.solmat.2025.113603 ↗
23. Challenges in rheological characterization of highly concentrated suspensions - a case study for screen-printing silver pastes10.3791/55377 ↗
24. Devoto
25. 2024
26. Accelerated TC test in comparison with standard TC Test for PV modules with ribbon, wire and shingle interconnection
27. A study of lubricants on silver flakes for microelectronics conductive adhesives10.1109/6144.796536 ↗
28. Wong
29. Silver surface iodination for enhancing the conductivity of conductive composites10.1002/adfm.201000673 ↗
30. Enhanced conductivity induced by attractive capillary force in ternary conductive adhesive10.1016/j.compscitech.2016.10.028 ↗
31. Iodine-Induced microphase separation controls the flow behavior and electrical conductivity of silver-filled polymer composites10.1021/acsami.5c09040 ↗