journal article·2026-04Open access

Coffee and turmeric bio-based shape-stabilized composite PCMs for thermal and solar energy storage applications

Amit Kumar Mishra, Matteo Morciano, Elena Campagnoli, Valter Giaretto, Matteo Fasano, Eliodoro Chiavazzo

Abstract

Bio-based shape-stabilized composite phase change materials (ss-PCMs) are emerging as sustainable solutions for thermal and solar energy harvesting. However, typical shape-stability issues, poor thermal/optical properties, and complex synthesis methods hinder the use of such materials at large scale. This study reports the design of nanofiller-loaded bio-based composite PCMs with enhanced thermo-optical and mechanical properties (shape-stability). Incorporating a 25 wt% biomass-derived porous matrix (coffee/turmeric powder) significantly enhanced the material's structural integrity by effectively controlling PCM leakage while achieving a high latent thermal energy storage (TES) capacity of ∼130 J/g. Graphene-loaded ss-composite PCMs demonstrated a significant photothermal conversion efficiency enhancement (106 %) and effective thermal management (TM) potential (superheat degree reduced by ∼ 10 °C) compared to pristine PCM, due to the improved photo-thermal properties and power density. Thermal cycling (up to 500 cycles) and load-bearing capacity tests (∼212,566 and ∼31,242 N/m 2 across the phase transition zone) confirm the high reliability of the proposed novel ss-composite PCMs in terms of thermal and shape stability. These results highlight their strong potential for long-term TES applications, with stable performance even under adverse environmental conditions such as humidity and wetting. This research contributes to the design of bio-compatible (possibly edible) substance-based strategies for creating cost-effective composite PCMs with enhanced thermo-optical and shape stability characteristics, offering significant advancement for latent TES systems and TM technologies. Highlights • Coffee and turmeric bio-based porous framework improves structural integrity. • Sustainable PCM composites with superior power density and stability for TES. • PCM composite with superior PTC and thermal management capacity. • Newly designed cost-effective and environmentally friendly shape stabilized PCMs.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Solar-Powered Water Purification Methods

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Carboxymethyl cellulose enhanced polymeric form stable phase change materials with reversible transparency for energy storage10.1021/acssuschemeng.4c05951 ↗
2. Effect of twisted fins on the melting performance of PCM in a latent heat thermal energy storage system in vertical and horizontal orientations: energy and exergy analysis10.1016/j.applthermaleng.2022.119489 ↗
3. A computational view on nanomaterial intrinsic and extrinsic features for nanosafety and sustainability10.1016/j.mattod.2023.05.029 ↗
4. High-efficiency photo-thermo-electric system with waste heat utilization and energy storage10.1021/acsami.2c11223 ↗
5. Progress in solar PV technology: research and achievement10.1016/j.rser.2012.09.028 ↗
6. Shape stabilized phase change materials based on different support structures for thermal energy storage applications--A review10.1016/j.energy.2022.125463 ↗
7. Regulating cold energy from the universe by bifunctional phase change materials for sustainable cooling10.1002/aenm.202402667 ↗
8. Photo-curable bio-based comb/bottle brush epoxy resin/beeswax/copper foam phase change materials with high enthalpy value, high conductivity, and multifunctional properties10.1016/j.compscitech.2024.110506 ↗
9. An overview on the use of additives and preparation procedure in phase change materials for thermal energy storage with a focus on long term applications10.1016/j.est.2022.105140 ↗
10. Elevating the photothermal conversion efficiency of phase-change materials simultaneously toward solar energy storage, self-healing, and recyclability10.1021/acsami.2c05302 ↗
11. The MXene/water nanofluids with high stability and photo-thermal conversion for direct absorption solar collectors: a comparative study10.1016/j.energy.2021.120483 ↗
12. Carbon nanotube/carbon foam thermal-bridge enhancing solar energy conversion and storage of phase change materials
13. Experimental study on pressure-enhanced close contact melting with PCMs for stable temperature control of high heat flux electronic devices10.1016/j.applthermaleng.2023.120707 ↗
14. Thermally enhanced flexible phase change materials for thermal energy conversion and management of wearable electronics
15. Enhanced thermal management in electronic devices through control-oriented structures10.1039/D4TA00520A ↗
16. Trending applications of phase change materials in sustainable thermal engineering: an up-to-date review
17. Bio-based, recyclable, and form-stable thermally conductive phase change composite featuring thermally induced flexibility10.1021/acsapm.4c01756 ↗
18. Thermal interface materials: from fundamental research to applications10.1002/sus2.239 ↗
19. Carbon black nano particle loaded lauric acid-based form-stable phase change material with enhanced thermal conductivity and photo-thermal conversion for thermal energy storage10.1016/j.energy.2019.116572 ↗
20. Enhancement of heat transfer through the incorporation of copper metal wool in latent heat thermal energy storage systems10.1016/j.renene.2024.120888 ↗
21. 3D printed lattice metal structures for enhanced heat transfer in latent heat storage systems10.1016/j.est.2023.107350 ↗
22. Evaluating the energy and economic performance of hybrid photovoltaic thermal system integrated with multiwalled carbon nanotubes enhanced phase change material
23. Lauric acid based form-stable phase change material for effective electronic thermal management and energy storage application
24. Advancements in form-stabilized phase change materials: stabilization mechanisms, multifunctionalities, and applications-A comprehensive review
25. Fabrication of shape-stable composite phase change materials based on lauric acid and graphene/graphene oxide complex aerogels for enhancement of thermal energy storage and electrical conduction10.1016/j.tca.2018.04.002 ↗
26. Lauric acid/expanded graphite composite phase change film with high thermal conductivity for thermal management10.1021/acs.energyfuels.3c04877 ↗
27. A lauric acid-hybridized bentonite composite phase-changing material for thermal energy storage10.1039/C9RA06936D ↗
28. EG@ Bi-MOF derived porous carbon/lauric acid composite phase change materials for thermal management of batteries10.1016/j.energy.2023.127180 ↗
29. Bio-based dual-functionalized phase change composite: ultrafast solar-to-thermal conversion and reinforced heat storage capacity10.1021/acs.energyfuels.1c02203 ↗
30. Flexible phase change composites based on hierarchically porous polypyrrole scaffold for broad-band solar absorption and efficient solar-thermal-electric energy conversion10.1016/j.compscitech.2024.110519 ↗
31. Experimental analysis of carbon-based phase change materials composites for a fast numerical design of cold energy storage systems10.1016/j.applthermaleng.2023.120907 ↗
32. Nano-enhanced organic form stable PCMs for medium temperature solar thermal energy harvesting: recent progresses, challenges, and opportunities10.1016/j.rser.2022.112321 ↗
33. Thermal properties of PEG/graphene nanoplatelets (GNPs) composite phase change materials with enhanced thermal conductivity and photo-thermal performance10.3390/app8122613 ↗
34. Superior thermal conductivity and photo-thermal conversion efficiency of carbon black loaded organic phase change material10.1016/j.molliq.2019.04.132 ↗
35. Amino-functionalized single-walled carbon nanotubes-integrated polyurethane phase change composites with superior photothermal conversion efficiency and thermal conductivity10.1021/acssuschemeng.9b03853 ↗
36. Experimental investigation on the performance of binary carbon-based nano-enhanced inorganic phase change materials for thermal energy storage applications10.1016/j.est.2024.111373 ↗
37. Shape-stabilized phase change materials based on porous supports for thermal energy storage applications10.1016/j.cej.2018.09.013 ↗
38. Microencapsulation approaches for the development of novel thermal energy storage systems and their applications10.1016/j.solmat.2024.113271 ↗
39. Phase change materials for thermal energy storage10.1016/j.pmatsci.2014.03.005 ↗
40. A critical review of polymer support-based shape-stabilized phase change materials for thermal energy storage applications10.1002/est2.639 ↗
41. Shape-stable composite phase change materials encapsulated by bio-based balsa wood for thermal energy storage10.1016/j.solmat.2021.111187 ↗
42. A review of phase change heat transfer in shape-stabilized phase change materials (ss-PCMs) based on porous supports for thermal energy storage10.1016/j.rser.2020.110127 ↗
43. Enhanced thermophysical properties of organic PCM through shape stabilization for thermal energy storage in buildings: a state of the art review10.1016/j.enbuild.2021.110799 ↗
44. A novel form stable PCM based bio composite material for solar thermal energy storage applications10.1016/j.est.2020.101403 ↗
45. Bio-based sunflower carbon/polyethylene glycol shape-stabilized phase change materials for thermal energy storage10.1039/D4RA03208J ↗
46. Research progress of biomass materials in the application of organic phase change energy storage materials10.1039/D3TA07521D ↗
47. Phase change material with gelation imparting shape stability10.1021/acsomega.1c07376 ↗
48. Bio-based composite as phase change material including spent coffee grounds and beeswax paraffin10.1007/s11814-023-1448-5 ↗
49. Novel bio-based composite phase change materials with reduced graphene oxide-functionalized spent coffee grounds for efficient solar-to-thermal energy storage10.1016/j.solmat.2020.110790 ↗
50. Antibacterial activity of coffee10.1021/jf00046a035 ↗
51. Biomimetic and bio-derived composite phase change materials for thermal energy storage applications: a thorough analysis and future research directions10.1016/j.est.2024.110945 ↗
52. Harnessing multifunctional electrospun nanofibers containing phase change materials for energy-efficient thermal management: a review on recent trends
53. Bio-based phase change materials for sustainable development10.3390/ma17194816 ↗
54. Bio-based phase-change materials for thermal energy storage : recent advances, challenges, and outlook
55. Review on bio-based shape-stable phase change materials for thermal energy storage and utilization10.1063/5.0102005 ↗
56. Bio-based MXene hybrid aerogel/paraffin composite phase change materials with superior photo and electrical responses toward solar thermal energy storage10.1016/j.solmat.2022.112124 ↗
57. Thermal conductivity measurement techniques for characterizing thermal energy storage materials – a review10.1016/j.rser.2019.03.020 ↗
58. Synthesis and thermal properties of shape-stabilized lauric acid/activated carbon composites as phase change materials for thermal energy storage10.1016/j.solmat.2012.03.013 ↗
59. Low-cost and highly thermally conductive lauric acid–paraffin–expanded graphite multifunctional composite phase change materials for quenching thermal runaway of lithium-ion battery10.1016/j.egyr.2023.01.102 ↗
60. Preparation and thermal performances of lauric acid/polyvinyl butyral/graphene nanoplates composite phase change materials
61. Preparation and characteristics of microencapsulated lauric acid as composite thermal energy storage materials
62. Nanoencapsulated lauric acid with a poly (Methyl methacrylate) shell for thermal energy storage with optimum capacity and reliability10.1021/acsapm.0c01296 ↗
63. Preparation and thermal performance of methyl palmitate and lauric acid eutectic mixture as phase change material (PCM)10.1016/j.est.2017.08.005 ↗
64. Thermophysical profile of ethylene glycol based nanofluids containing two types of carbon Black nanoparticles with different specific surface areas10.1016/j.molliq.2020.115255 ↗
65. Enhancing the performance of thermal energy storage by adding nano-particles with paraffin phase change materials10.1515/ntrev-2023-0180 ↗
66. Thermal and thermodynamic characterization of a dye powder from liquid turmeric extracts by spray drying10.15446/rfna.v69n1.54752 ↗
67. Thermophysical properties of fresh and roasted coffee powders 110.1111/j.1745-4530.1997.tb00409.x ↗
68. Non-destructive 3D imaging of composite restorations using optical coherence tomography: marginal adaptation of self-etch adhesives10.1016/j.jdent.2011.01.011 ↗
69. Optical coherence tomography for the study of polymer and polymer matrix composites10.1111/str.12095 ↗
70. Predicting residual stresses due to solidification in cast plastic plates10.1179/146580100101541319 ↗
71. Nano-inclusion aided thermal conductivity enhancement in palmitic acid/di-methyl formamide phase change material for latent heat thermal energy storage
72. Thermal conductivity enhancement in organic phase change material (phenol-water system) upon addition of Al2O3, SiO2 and TiO2 nano-inclusions10.1016/j.molliq.2018.08.001 ↗
73. High thermal conductivity phase change composite with percolating carbon fiber network10.1016/j.apenergy.2015.05.042 ↗
74. Reversible temperature regulation of electrical and thermal conductivity using liquid--solid phase transitions10.1038/ncomms1288 ↗
75. Thermal conductivity enhancement of lauric acid phase change nanocomposite with graphene nanoplatelets10.1016/j.applthermaleng.2015.01.056 ↗
76. Thermophysical characterization and melting heat transfer analysis of an organic phase change material dispersed with GNP- Ag hybrid nanoparticles10.1007/s00231-022-03218-x ↗
77. Carbon black/octadecane composites for room temperature electrical and thermal regulation10.1016/j.carbon.2015.06.037 ↗
78. Determination of thermal properties of coffee beans at different degrees of roasting10.25186/cs.v13i4.1491 ↗
79. Thermal properties of turmeric rhizomes
80. Eco-friendly approach to thermal energy storage: assessing the thermal and chemical properties of coconut biochar-enhanced phase change material10.1002/est2.679 ↗
81. Large-scale production of spent coffee ground-based photothermal materials for high-efficiency solar-driven interfacial evaporation10.1016/j.cej.2022.140361 ↗
82. Exploring the properties and potential uses of biocarbon from spent coffee grounds: a comparative look at dry and wet processing methods10.3390/pr11072099 ↗
83. Turmeric powder and starch: selected physical, physicochemical, and microstructural properties10.1111/j.1750-3841.2011.02403.x ↗
84. Facile fabrication of shape-stabilized polyethylene glycol/cellulose nanocrystal phase change materials based on thiol-ene click chemistry and solvent exchange10.1016/j.cej.2020.125206 ↗
85. Carbon-intercalated halloysite-based aerogel efficiently encapsulating phase change materials with excellent photothermal conversion and energy storage
86. Fabrication and performance of shape-stable phase change composites supported by environment-friendly and economical loofah sponge fibers for thermal energy storage10.1021/acs.energyfuels.2c00194 ↗
87. Photothermal nanomaterials: a powerful light-to-heat converter10.1021/acs.chemrev.3c00159 ↗
88. Single-walled carbon nanotube/phase change material composites: sunlight-driven, reversible, form-stable phase transitions for solar thermal energy storage10.1002/adfm.201203728 ↗
89. Flexible phase change materials with enhanced tensile strength, thermal conductivity and photo-thermal performance10.1016/j.solmat.2020.110728 ↗
90. Coffee grounds-based hydrogel as a high-performance and durable evaporator for solar-driven freshwater generation
91. Novel bio-based composite phase change materials with reduced graphene oxide-functionalized spent coffee grounds for efficient solar-to-thermal energy storage10.1016/j.solmat.2020.110790 ↗
92. Coffee-based colloids for direct solar absorption10.1038/s41598-019-39032-5 ↗
93. Self-assembled dehydropeptide nano carriers for delivery of ornidazole and curcumin10.1016/j.colsurfb.2017.04.036 ↗
94. Effects of curcumin-/boron-based compound complexation on antioxidant and antiproliferation activity10.1007/s13765-018-0374-4 ↗
95. Highly stable MXene-based phase change composites with enhanced thermal conductivity and photothermal storage capability10.1021/acsaem.2c02140 ↗
96. Photo-to-thermal conversion and energy storage of lauric acid/expanded graphite composite phase change materials10.1002/er.5542 ↗
97. Anisotropic and shape-stable sugarcane-based phase change composites in the application of solar thermal energy storage10.1016/j.energy.2024.132942 ↗
98. Solar to thermal energy storage performance of composite phase change material supported by copper foam loaded with graphite and boron nitride10.1016/j.solener.2024.112459 ↗
99. MXene-modified bio-based pitaya peel foam/polyethylene glycol composite phase change material with excellent photo-thermal conversion efficiency, thermal energy storage capacity and thermal conductivity10.1016/j.est.2023.110089 ↗
100. Preparation and characterization of GO/PEG photo-thermal conversion form-stable composite phase change materials10.1016/j.renene.2019.03.141 ↗