Optimization of VTD Sb2Se3 absorber growth rate in CdS/Sb2Se3 thin film solar cells: A defect perspective on chloride vs non-chloride based devices
Source abstract
Abstract
Control of source-to-substrate distance (D So-Sub ) and carrier gas in vapor transport deposition (VTD) of thin-film chalcogenide absorbers is crucial for ensuring uniform deposition and high film quality in solar cells. While well-optimized for large-scale CdTe, identifying a suitable VTD growth protocol for Sb 2 Se 3 remains challenging due to its pseudo-1D ribbon-like structure. This challenge becomes even more complex for the CdS/Sb 2 Se 3 device platform, where issues such as excessive intermixing and elemental diffusion at the CdS/Sb 2 Se 3 interface must be mitigated to achieve a high-quality heterojunction and, consequently, a highly efficient solar cell. In this work, we address this challenge by investigating the impact of VTD D So-Sub in an Ar gas flow on the properties of Sb 2 Se 3 and CdS/Sb 2 Se 3 cells, comparing devices with and without chloride-processed CdS. It was found that at D So-Sub ≤ 3 cm, a high growth rate with excessive oversaturation resulted in rough Sb 2 Se 3 films with small grains. D So-Sub ≈ 6 cm provided a balanced growth rate, leading to larger grains and a uniform surface, whereas D So-Sub ≥ 10 cm resulted in a low growth rate and a highly dispersed structure. Solar cells with VTD D So-Sub ≈ 6 cm and chloride-processed CdS reached 5 % efficiency, ∼10 % higher than unprocessed counterparts. A comprehensive comparative analysis between these two device architectures is provided, highlighting the interrelation between absorber quality at different D So-Sub , cell performance, defects, and recombination processes, contributing to a better understanding and optimization of CdS/Sb 2 Se 3 solar cells.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Advanced Semiconductor Detectors and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. 9.2%-efficient core-shell structured antimony selenide nanorod array solar cells
2. Wen, X., Chen, C., Lu, S., Li, K., Kondrotas, R., Zhao, Y., Chen, W., Gao, L., Wang, C., Zhang, J., Niu, G., Tang, J., n.d. Vapor Transport Deposition of Antimony Selenide Thin Film Solar Cells with 7.6% Efficiency. https://doi.org/10.1038/s41467-018-04634-6.10.1038/s41467-018-04634-6 ↗
3. Seed layer optimisation for ultra-thin Sb2Se3 solar cells on TiO2 by vapour transport deposition10.3390/ma15238356 ↗
4. Analysis of grain orientation and defects in Sb 2 Se 3 solar cells fabricated by close-spaced sublimation10.1016/j.solener.2021.07.022 ↗
5. Regulating deposition kinetics via a novel additive-assisted chemical bath deposition technology enables fabrication of 10.57%-efficiency Sb2Se3 solar cells10.1039/D2EE02261C ↗
6. Reactive DC sputtered TiO2 electron transport layers for cadmium-free Sb2Se3 solar cells10.1002/aenm.202401077 ↗
7. Thin-film Sb2Se3 photovoltaics with oriented one-dimensional ribbons and benign grain boundaries10.1038/nphoton.2015.78 ↗
8. Screening and optimization of processing temperature for Sb2Se3 thin film growth protocol: interrelation between grain structure, interface intermixing and solar cell performance10.1016/j.solmat.2021.111045 ↗
9. Electrical characterization of annealed chemical-bath-deposited CdS films and their application in superstrate configuration CdTe/CdS solar cells
10. Impact of CdS annealing atmosphere on the performance of CdS-CdTe solar cell
11. CZTS solar cell with non-toxic buffer layer: a study on the sulphurization temperature and absorber layer thickness10.1016/j.solener.2020.06.103 ↗
12. Current Enhancement via a TiO 2 Window Layer for CSS Sb 2 Se 3 Solar Cells: performance limits and high V oc10.1109/JPHOTOV.2018.2885836 ↗
13. Stable 6%-efficient Sb2Se3 solar cells with a ZnO buffer layer10.1038/nenergy.2017.46 ↗
14. Suppressing buried interface nonradiative recombination losses toward high-efficiency antimony Triselenide solar cells
15. Dual-function of CdCl2 treated SnO2 in Sb2Se3 solar cells10.1016/j.apsusc.2020.147632 ↗
16. Post-treatment of TiO2 film enables high-quality Sb2Se3 film deposition for solar cell applications10.1021/acsami.2c07157 ↗
17. A post-deposition annealing approach for organic residue control in TiO2 and its impact on Sb2Se3/TiO2 device performance10.1039/D2FD00064D ↗
18. Investigation of electronic transport mechanisms in Sb 2 Se 3 thin-film solar cells10.1016/j.solmat.2019.04.003 ↗
19. Interfacial engineering towards enhanced photovoltaic performance of Sb2Se3 solar cell10.1002/adfm.202208243 ↗
20. Direct hydrothermal deposition of antimony triselenide films for efficient planar heterojunction solar cells10.1021/acsami.1c02393 ↗
21. Carrier transport enhancement mechanism in highly efficient antimony selenide thin-film solar cell
22. Characterization of basic physical properties of Sb2Se3 and its relevance for photovoltaics10.1007/s12200-017-0702-z ↗
23. Improving the performance of Sb2Se3 thin film solar cells over 4% by controlled addition of oxygen during film deposition10.1002/pip.2627 ↗
24. Investigation of electrically-active defects in Sb2Se3 thin-film solar cells with up to 5.91% efficiency via admittance spectroscopy10.1016/j.solmat.2018.07.004 ↗
25. Ambient CdCl2 treatment on CdS buffer layer for improved performance of Sb2Se3 thin film photovoltaics
26. Post deposition annealing effect on properties of CdS films and its impact on CdS/Sb2Se3 solar cells performance10.3389/fenrg.2023.1162576 ↗
27. An alternative chlorine-assisted optimization of CdS/Sb2Se3 solar cells: towards understanding of chlorine incorporation mechanism10.1016/j.jallcom.2024.176175 ↗
28. Remarkable Cd-free Sb2Se3solar cell yield achieved by interface band-alignment and growth orientation screening10.1039/D1TA08404F ↗
29. The sb-se (antimony-selenium) system10.1007/BF02667889 ↗
30. Thermodynamics of formation and liquid–vapor phase transitions of antimony alloys with selenium and sulfur
31. Improved open-circuit voltage of Sb2Se3 thin-film solar cells via interfacial sulfur diffusion-induced gradient bandgap engineering10.1002/solr.202100419 ↗
32. Buried interface modulation using self-assembled monolayer and ionic liquid hybrids for high-performance perovskite and Perovskite/CuInGaSe2 tandem photovoltaics
33. An effective engineering with simultaneous carrier density enhancement and interface optimization enables efficient Sb2Se3 solar cells10.1016/j.apsusc.2023.156783 ↗
34. Plasma etching-induced surface modification and interfacial defect passivation for antimony triselenide thin film solar cells10.1016/j.ceramint.2024.01.129 ↗
35. Crystallographic orientation control and defect passivation for high-efficient antimony selenide thin-film solar cells10.1016/j.mtphys.2022.100772 ↗
36. Voltage dependent admittance spectroscopy for the detection of near interface defect states for thin film solar cells10.1039/C7CP05236G ↗
37. Deep defects in Cu2ZnSn (S,Se)4 solar cells with varying Se content10.1103/PhysRevApplied.5.024004 ↗
38. Determination of defect distributions from admittance measurements and application to Cu(In,Ga)Se2 based heterojunctions10.1063/1.363401 ↗
39. Post-deposition annealing and interfacial atomic layer deposition buffer layers of Sb2Se3/CdS stacks for reduced interface recombination and increased open-circuit voltages
40. The complex defect chemistry of antimony selenide10.1039/C9TA02022E ↗
41. Reduction of bulk and interface defects via photo-annealing treatment for high-efficiency antimony selenide solar cells10.1039/D4EE02877E ↗
42. Heterojunction lithiation engineering and diffusion-induced defect passivation for highly efficient Sb2(S,Se)3 solar cells
43. Efficient defect passivation of Sb2Se3 film by tellurium doping for high performance solar cells10.1039/D0TA00443J ↗
44. Interface optimization and defects suppression via NaF introduction enable efficient flexible Sb2Se3 thin-film solar cells10.1016/j.jechem.2023.10.059 ↗
45. Simultaneous band alignment modulation and carrier dynamics optimization enable highest efficiency in Cd-Free Sb2Se3 solar cells