journal article·2025-09

Transition metal oxide as hole transport layer for crystalline silicon solar cells: Progress and prospects

Linfeng Yang, Xiaofei Xu, Jingjie Li, Wanyu Lu, Dayong Yuan, Tinghao Liu, Hui Yan, Qian Kang, Yongzhe Zhang

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Photovoltaic System Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. High-efficiency silicon heterojunction solar cells: materials, devices and applications10.1016/j.mser.2020.100579 ↗
2. Progress and future prospects of wide‐bandgap metal‐compound‐based passivating contacts for silicon solar cells10.1002/adma.202200344 ↗
3. Passivating contacts for crystalline silicon solar cells10.1038/s41560-019-0463-6 ↗
4. Silicon heterojunction back-contact solar cells by laser patterning10.1038/s41586-024-08110-8 ↗
5. Alloying from screen-printed aluminum pastes containing boron additives10.1109/JPHOTOV.2012.2217113 ↗
6. High efficiency n-type Si solar cells on Al2O3-passivated boron emitters10.1063/1.2945287 ↗
7. Silicon heterojunction solar cells with up to 26.81% efficiency achieved by electrically optimized nanocrystalline-silicon hole contact layers10.1038/s41560-023-01255-2 ↗
8. Design rules for high-efficiency both-sides-contacted silicon solar cells with balanced charge carrier transport and recombination losses10.1038/s41560-021-00805-w ↗
9. Silicon heterojunction solar cells: recent technological development and practical aspects - from lab to industry10.1016/j.solmat.2018.07.018 ↗
10. Surface passivation of crystalline silicon solar cells: present and future10.1016/j.solmat.2018.06.047 ↗
11. Current losses at the front of silicon heterojunction solar cells10.1109/JPHOTOV.2011.2174967 ↗
12. Passivating contacts for crystalline silicon solar cells: from concepts and materials to prospects10.1109/JPHOTOV.2018.2797106 ↗
13. High‐performance TiO2‐based electron‐selective contacts for crystalline silicon solar cells10.1002/adma.201600926 ↗
14. Mitigating plasmonic absorption losses at rear electrodes in high‐efficiency silicon solar cells using dopant‐free contact stacks
15. High‐performance transparent electron‐selective contact for crystalline silicon solar cells
16. Organic-silicon solar cells exceeding 20% efficiency10.1016/j.egypro.2015.07.047 ↗
17. Conformal monolayer contacts with lossless interfaces for perovskite single junction and monolithic tandem solar cells10.1039/C9EE02268F ↗
18. High-efficiency organic–silicon heterojunction solar cells with high work function PEDOT:F-based hole-selective contacts10.1039/D4TA08449G ↗
19. Fabrication of low-cost and efficient PEDOT:PSS-silicon hybrid heterojunction solar cell via tailoring the organic layer thickness10.1007/s10854-023-11812-w ↗
20. Efficient silicon solar cells through organic self‐assembled monolayers as electron selective contacts
21. 23.5%-efficient silicon heterojunction silicon solar cell using molybdenum oxide as hole-selective contact10.1016/j.nanoen.2020.104495 ↗
22. Hole selective MoOx contact for silicon solar cells10.1021/nl404389u ↗
23. Low oxygen content MoOx and SiOx tunnel layer based heterocontacts for efficient and stable crystalline silicon solar cells approaching 22% efficiency
24. Performance analysis of silicon carrier selective contact solar cells with ALD MoOx as hole selective layer10.1007/s12633-021-00984-x ↗
25. A new p-Ni1−xO : Li/n-Si heterojunction solar cell fabricated by RF magnetron sputtering10.1088/0022-3727/46/27/275104 ↗
26. Hole selective WOx and V2Ox contacts using solution process for silicon solar cells application10.1016/j.matchemphys.2021.125101 ↗
27. Achieving 23.83% conversion efficiency in silicon heterojunction solar cell with ultra‐thin MoOx hole collector layer via tailoring (i)a‐Si:H/MoOx interface10.1002/pip.3638 ↗
28. Nickel oxide hole‐selective heterocontact for silicon solar cells: role of SiOx interlayer on device performance10.1002/solr.201900261 ↗
29. Hole-selective electron-blocking copper oxide contact for silicon solar cells10.1109/JPHOTOV.2017.2720619 ↗
30. Transition metal oxides for organic electronics: energetics, device physics and applications10.1002/adma.201201630 ↗
31. Chromium trioxide hole-selective heterocontacts for silicon solar cells10.1021/acsami.8b02878 ↗
32. Solution deposited NiO thin-films as hole transport layers in organic photovoltaics10.1016/j.orgel.2010.05.008 ↗
33. Reduction of Cu-rich interfacial layer and improvement of bulk CuO property through two-step sputtering for p-CuO/n-Si heterojunction solar cell10.1063/1.4893321 ↗
34. Hole-collection mechanism in passivating metal-oxide contacts on Si solar cells: insights from numerical simulations10.1109/JPHOTOV.2018.2796131 ↗
35. Wang · 2022 · vol. 5
36. Heterojunction solar cells with asymmetrically carrier-selective contact structure of molybdenum-oxide/silicon/magnesium-oxide10.1016/j.solener.2017.11.047 ↗
37. Study of surface passivation and charge transport barriers in DASH solar cell10.1109/JPHOTOV.2019.2926624 ↗
38. Numerical simulation of silicon heterojunction solar cells featuring metal oxides as carrier-selective contacts10.1109/JPHOTOV.2018.2793762 ↗
39. Numerical investigation of energy level strategy for TMO/Si tunneling heterojunction solar cells10.1007/s10825-024-02128-x ↗
40. Improving the quality of the Si/Cu2O interface by methyl‐group passivation and its application in photovoltaic devices10.1002/admi.201600833 ↗
41. Doped Cu2O/n-Si heterojunction solar cell
42. Silicon heterojunction solar cells with Cu2O:N as p-type layer
43. Novel boron-doped p-type Cu2O thin films as a hole-selective contact in c-Si solar cells10.1021/acsami.9b22581 ↗
44. Interfacial engineering of Cu2O passivating contact for efficient crystalline silicon solar cells with an Al2O3 passivation layer10.1021/acsami.1c08258 ↗
45. Effective hydrogenation strategies to boost efficiency over 20% for crystalline silicon solar cell with Al2O3/Cu2O passivating contact
46. Enhanced carrier collection in p-Ni1−xO:Li/n-Si heterojunction solar cells using LiF/Al electrodes10.1016/j.tsf.2014.11.025 ↗
47. Hole-selective NiO:Cu contact for NiO/Si heterojunction solar cells10.1016/j.jallcom.2018.03.067 ↗
48. On the annealing-induced enhancement of the interface properties of NiO:Cu/wet-SiOx/n-Si tunnelling junction solar cells10.1063/1.5026135 ↗
49. Heterostructure silicon solar cells with enhanced power conversion efficiency based on six/Ni3+ self-doped NiOx passivating contact10.1021/acsomega.2c00496 ↗
50. Gradient doped nickel oxide hole selective heterocontact and ultrathin passivation for silicon photovoltaics with efficiencies beyond 20%
51. Interface engineering and modulation of nickel oxide for high air‐stable p‐type crystalline silicon solar cells
52. ‐CuO/n‐Si heterojunction solar cells with high open circuit voltage and photocurrent through interfacial engineering10.1002/pip.2483 ↗
53. Fabrication and characterization of sputtered Cu2O:N/c-Si heterojunction diode10.1063/1.4986084 ↗
54. Tuning the transparency of Cu2O with substitutional cation doping10.1021/cm703395k ↗
55. Magnesium‐doped cuprous oxide (Mg:Cu2O) thin films as a transparent p‐type semiconductor10.1002/pssa.201532870 ↗
56. Impact of incorporating sodium into polycrystalline p-type Cu2O for heterojunction solar cell applications10.1063/1.4902879 ↗
57. Chlorine doping of Cu2O10.1016/j.solmat.2010.06.022 ↗
58. Control of hole carrier density of polycrystalline Cu2O thin films by Si doping10.1063/1.1448398 ↗
59. Comparison between aluminum oxide surface passivation films deposited with thermal ALD, plasma ALD and PECVD10.1109/PVSC.2010.5614508 ↗
60. Novel interlayer boosting the performance of evaporated Cu2O hole‐selective contacts in Si solar cells10.1002/solr.202300727 ↗
61. Stability and magnetism of vacancy in NiO: a GGA+U study10.1140/epjb/e2008-00303-x ↗
62. Point defects in sputtered NiO films10.1063/1.3081025 ↗
63. High electron affinity enables fast hole extraction for efficient flexible inverted perovskite solar cells10.1002/aenm.201903487 ↗
64. Critical role of removing impurities in nickel oxide on high‐efficiency and long‐term stability of inverted perovskite solar cells
65. Homogenized NiOx nanoparticles for improved hole transport in inverted perovskite solar cells10.1126/science.adj8858 ↗
66. Electronic and transport properties of Li-doped NiO epitaxial thin films10.1039/C7TC05331B ↗
67. Optically transparent and electrically conductive NiO window layer for Si solar cells10.1016/j.matlet.2016.03.074 ↗
68. Doped nickel oxide carrier-selective contact for silicon solar cells10.1109/JPHOTOV.2021.3095458 ↗
69. A strategy to optimize nickel oxide/crystalline silicon heterocontact of HJT solar cells10.1149/2162-8777/acbcf0 ↗
70. Structural, electrical and optical properties of K-doped NiO films prepared by rapid pyrolysis sol-gel technique10.1016/j.tsf.2016.08.051 ↗
71. Electronic, electrical and optical properties of undoped and Na-doped NiO thin films10.1016/j.tsf.2015.04.043 ↗
72. Electronic structure of Li-doped NiO10.1103/PhysRevB.45.1612 ↗
73. Nickel oxide carrier selective contacts for silicon solar cells
74. Enhancement of NiO/Si solar cell by adding porous silicon and a silicon dioxide SiO2 carrier selective layer10.1016/j.matlet.2024.136002 ↗
75. Bilayer MoOX/CrOX passivating contact targeting highly stable silicon heterojunction solar cells10.1021/acsami.0c09877 ↗
76. Interface analysis and intrinsic thermal stability of MoOx based hole-selective contacts for silicon heterojunction solar cells10.1016/j.solmat.2019.110074 ↗
77. Solution-processed molybdenum oxide for hole-selective contacts on crystalline silicon solar cells10.1016/j.apsusc.2017.06.011 ↗
78. Sputter-deposited WOx and MoOx for hole selective contacts10.1016/j.egypro.2017.09.259 ↗
79. On the application of hole‐selective MoOx as full‐area rear contact for industrial scale p‐type c‐Si solar cells10.1002/pip.3363 ↗
80. Silicon heterojunction solar cell with passivated hole selective MoOx contact10.1063/1.4868880 ↗
81. 22.5% efficient silicon heterojunction solar cell with molybdenum oxide hole collector10.1063/1.4928747 ↗
82. MoOx work function, interface structure, and thermal stability analysis of ITO/MoOx/a-Si(i) stacks for hole-selective silicon heterojunction solar cells10.1016/j.apsusc.2021.149552 ↗
83. Dual functional dopant‐free contacts with titanium protecting layer: boosting stability while balancing electron transport and recombination losses
84. Stable MoOX‐based heterocontacts for p‐type crystalline silicon solar cells achieving 20% efficiency
85. Effects of a post deposition anneal on a tunneling Al2O3 interlayer for thermally stable MoOx hole selective contacts, Silicon PV 2021
86. Atomic layer deposition of vanadium oxide as hole‐selective contact for crystalline silicon solar cells10.1002/aelm.202000467 ↗
87. Improved V2OX passivating contact for p‐type crystalline silicon solar cells by oxygen vacancy modulation with a SiOX tunnel layer10.1002/admi.202100989 ↗
88. High‐performance hole‐selective V2OX/SiOX/NiOX contact for crystalline silicon solar cells10.1002/eom2.12175 ↗
89. Construction of V2Ox/Si heterojunction and carrier-assisted collection for high-efficiency silicon solar cells
90. Solution-processed vanadium oxide by low-temperature annealing for silicon solar cells with hole selective contact10.1016/j.mssp.2023.107638 ↗
91. Vanadium oxide hole-selective contact for crystalline silicon solar cells10.1021/acsaem.4c02556 ↗
92. In‐situ hydrogenation strategies on vanadium oxide hole‐selective contact for efficiency crystalline silicon solar cells
93. Universal interface engineering method for applying transition metal oxides in silicon heterojunction solar cell10.1016/j.solmat.2024.113170 ↗
94. Solution‐Processed copper‐doped chromium oxide with tunable oxygen vacancy for crystalline silicon solar cells hole‐selective contacts10.1002/solr.202100064 ↗
95. Novel hole selective CrOx contact for dopant-free back contact silicon solar cells10.1016/j.materresbull.2018.03.032 ↗
96. Characterization of transition metal oxide/silicon heterojunctions for solar cell applications10.3390/app5040695 ↗
97. Solution-processed tungsten oxide with Ta5+ doping enhances the hole selective transport for crystalline silicon solar cells10.1039/D4TC03049D ↗
98. Molybdenum oxide MoOx: a versatile hole contact for silicon solar cells10.1063/1.4903467 ↗
99. Molybdenum and tungsten oxide: high work function wide band gap contact materials for hole selective contacts of silicon solar cells10.1016/j.solmat.2015.05.031 ↗
100. Efficient silicon solar cells with dopant-free asymmetric heterocontacts10.1038/nenergy.2015.31 ↗