journal article·2025-08Open access

Scalable horizontal-dipping electrodeposition of platinum nanoparticles for dye-sensitized solar cells

Dariusz Augustowski, Maciej Michalik, Jakub Wilgocki-Ślęzak, Paweł Kwaśnicki, Jakub Rysz

Abstract

Up-scaling remains a great opportunity to achieve in the third generation of solar cells. This article describes a novel method that combines electrodeposition with the roll-to-roll technique, which may be useful in the current mass production of dye-sensitized solar cells. The results show that large areas of conductive substrates can easily be covered with catalytically active platinum nanoparticles using a small amount of aqueous solution of the platinum precursor salt sliding over a substrate. The surface coverage is controlled by the applied current density, which directly impacts the catalytic properties of the substrate. Electrodeposition proves to be a cost-effective, eco-friendly, and time-saving alternative compared to commonly used screen-printing methods. Additionally, the electrodeposited nanoparticles exhibit even higher electrocatalytic performance in cyclic voltammetry measurements. Dye-sensitized solar cells utilizing cathodes with platinum nanoparticles prepared with different deposition currents demonstrate efficiency in the range of 4.84–5.45 %, while referential cells with screen-printed electrodes achieve an average efficiency of 5.14 %.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films10.1038/353737a0 ↗
2. Efficiency versus effort: a better way to compare best photovoltaic research cell efficiencies?10.1016/j.solmat.2022.112097 ↗
3. REVIEW 1806478 (1 of 20) low-cost counter-electrode materials for dye-sensitized and perovskite solar
4. The polymer gel electrolyte based on poly(methyl methacrylate) and its application in quasi-solid-state dye-sensitized solar cells10.1016/j.matchemphys.2008.01.010 ↗
5. A novel thermosetting gel electrolyte for stable quasi-solid-state dye-sensitized solar cells10.1002/adma.200602886 ↗
6. The role of printing techniques for large-area dye sensitized solar cells10.1088/0268-1242/30/10/104003 ↗
7. Status and outlook of sensitizers/dyes used in dye sensitized solar cells (DSSC): a review10.1002/er.3538 ↗
8. Constructing a stable and high-performance counter electrode for QDSSCs by modifying Co3S4 hollow nanocages with CuCo–B alloy-nanosheets10.1016/j.solmat.2024.112994 ↗
9. V. Murugadoss, S. Arunachalam, V. Elayappan, S. Angaiah, Development of electrospun PAN/CoS nanocomposite membrane electrolyte for high-performance DSSC, (n.d.). https://doi.org/10.1007/s11581-018-2540-4.10.1007/s11581-018-2540-4 ↗
10. Preparation and characterization of novel polymer-based gel electrolyte for dye-sensitized solar cells based on poly(vinylidene fluoride-cohexafluoropropylene) and poly(acrylonitrile-cobutadiene) or poly(dimethylsiloxane) bis(3-aminopropyl) Copolymers10.3390/ma13122721 ↗
11. Review on polymer electrolyte in dye-sensitized solar cells (DSSCs)10.1016/j.solener.2015.02.043 ↗
12. Bonomo
13. A sustainable hydrogel-based dye-sensitized solar cell coupled to an integrated supercapacitor for direct indoor light
14. N. Wang, J. Hu, L. Gao, T. Ma, Current Progress in Solid-State Electrolytes for Dye-Sensitized Solar Cells: A Mini-Review, J. Electron. Mater. 49 (n.d.). https://doi.org/10.1007/s11664-020-08483-2.10.1007/s11664-020-08483-2 ↗
15. Layer-by-layer self-assembled mesoporous PEDOT–PSS and carbon black hybrid films for platinum free dye-sensitized-solar-cell counter electrodes
16. Graphene nanoplatelets doped with N at its edges as metal-free cathodes for organic dye-sensitized solar cells10.1002/adma.201304986 ↗
17. NiO as an efficient counter electrode catalyst for dye-sensitized solar cells10.1007/s11244-013-0218-8 ↗
18. Sol-gel spin coated well adhered MoO3 thin films as an alternative counter electrode for dye sensitized solar cells10.1016/j.solidstatesciences.2016.08.016 ↗
19. Enhanced catalytic performance of MoO3/MoS2-rGO counter electrode towards a Pt-free dye sensitized solar cell10.1016/j.solmat.2025.113496 ↗
20. WS2 and MoS2 counter electrode materials for dye-sensitized solar cells10.1002/pip.3350 ↗
21. Increased power conversion efficiency of dye-sensitized solar cells with counter electrodes based on carbon materials10.1039/C9RA03344K ↗
22. Stability assessment of alternative platinum free counter electrodes for dye-sensitized solar cells10.1039/C5EE02446C ↗
23. Highly-efficient dye-sensitized solar cells with collaborative sensitization by silyl-anchor and carboxy-anchor dyes10.1039/C5CC06759F ↗
24. Gianola
25. Molecular engineering of photosensitizers for solid-state dye-sensitized solar cells: recent developments and perspectives10.1002/open.202300170 ↗
26. B. Mei, M.D.S. Anchez, T. Reinecke, S. Kaluza, W. Xia, M. Muhler, The synthesis of Nb-doped TiO 2 nanoparticles by spray drying: an efficient and scalable method †, (n.d.). https://doi.org/10.1039/c1jm11431j.10.1039/c1jm11431j ↗
27. Y. Galagan, H. Fledderus, H. Gorter, H.H. Tmannetje, S. Shanmugam, R. Mandamparambil, J. Bosman, J.-E.J.M. Rubingh, J.-P. Te, A. Salem, I.G. De Vries, R. Andriessen, W.A. Groen, Roll-to-Roll Slot-Die Coated Organic Photovoltaic (OPV) Modules with High Geometrical Fill Factors, (n.d.). https://doi.org/10.1002/ente.201500150.10.1002/ente.201500150 ↗
28. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
29. Glucose biosensor based on electrodeposition of platinum nanoparticles onto carbon nanotubes and immobilizing enzyme with chitosan-SiO2 sol-gel10.1016/j.bios.2007.10.009 ↗
30. Zhang · 2011 · vol. 27 · 14662
31. Jeyaraj
32. Bio-directed synthesis of platinum nanoparticles using aqueous honey solutions and their catalytic applications10.1016/j.colsurfa.2011.05.045 ↗
33. C.M. Sá Nchez-Sá Nchez, J. Solla-Gulló, F.J. Vidal-Iglesias, A. Aldaz, V. Montiel, E. Herrero, Imaging Structure Sensitive Catalysis on Different Shape-Controlled Platinum Nanoparticles, (n.d.). https://doi.org/10.1021/ja100922h.10.1021/ja100922h ↗
34. Efficiency boost in dye-sensitized solar cells by post-annealing uv-ozone treatment of tio2 mesoporous layer10.3390/ma14164698 ↗
35. Szindler
36. Magnetron sputtered electron blocking layer as an efficient method to improve dye-sensitized solar cell performance10.3390/en13112690 ↗
37. Electrodeposition of p-WS2 thin film and characterisation10.1016/S0022-0248(01)00851-X ↗
38. CuS/WS2 and CuS/MoS2 heterostructures for high performance counter electrodes in dye-sensitized solar cells10.1016/j.solener.2018.05.074 ↗
39. Electrically switchable film structure of conjugated polymer composites10.3390/ma15062219 ↗
40. Investigation of electrochemically deposited and chemically reduced platinum nanostructured thin films as counter electrodes in dye-sensitized solar cells
41. Enhanced performance of a dye-sensitized solar cell with an electrodeposited-platinum counter electrode10.1016/j.electacta.2007.10.074 ↗
42. Enhanced efficiency of dye-sensitized solar cells with counter electrodes consisting of platinum nanoparticles and nanographites10.1016/j.electacta.2011.10.050 ↗
43. Early stages of platinum electrodeposition on highly oriented pyrolitic graphite: scanning tunneling microscopy imaging and reaction pathway10.1021/j100121a041 ↗
44. Gwyddion: an open-source software for SPM data analysis
45. A highly efficient dye-sensitized solar cell with a platinum nanoflowers counter electrode10.1039/c2jm14623a ↗
46. Beer–Lambert law for optical tissue diagnostics: current state of the art and the main limitations
47. Work function of fluorine doped tin oxide10.1116/1.3525641 ↗
48. Probing the energy levels of perovskite solar cells via Kelvin probe and UV ambient pressure photoemission spectroscopy
49. Counter electrodes in dye-sensitized solar cells10.1039/C6CS00752J ↗
50. Novel composite graphene/platinum electro-catalytic electrodes prepared by electrophoretic deposition from colloidal solutions10.1016/j.electacta.2011.11.058 ↗
51. On the essential role of current density in electrocatalytic activity of the electrodeposited platinum for oxidation of ammonia10.1016/j.jpowsour.2011.05.058 ↗
52. Size- and density-controllable fabrication of the platinum nanoparticle/ITO electrode by pulse potential electrodeposition for ammonia oxidation10.1021/acsami.7b08604 ↗
53. Untersuchungen Zur anodischen Oxidation von Ammoniak an Platin-Elektroden10.1016/S0022-0728(70)80103-6 ↗