journal article·2025-01

Grain boundary barrier model can explain the beneficial effect of alkali doping in Cu(In,Ga)Se2 solar cells

Aniela Czudek, Aleksander Urbaniak, Alexander Eslam, Roland Wuerz, Malgorzata Igalson

Publisher page

Abstract

Although the beneficial effect of alkali doping of Cu(In,Ga)Se 2 has been known for decades, there is still no agreement on its precise physical pathway. In this work we present a case for this effect being linked to the alkali-induced passivation of barriers at the grain boundaries (GBs). In this model, postulated earlier by, among all, C-S. Jiang and U. Rau, donor defects at the GBs result in downward band bending, creating energy barriers for holes and thus reducing the intergrain mobility, at the same time leading to the creation of depleted regions around GBs, decreasing apparent doping concentration. The effect of alkali doping would be through passivation of those donor defects, increasing both mobility and doping concentration. Results of our systematic study on Cu(In,Ga)Se 2 thin films and solar cells doped with different concentrations of alkali metals (Na and K) point to the alkali effect leading to a simultaneous increase of both free hole concentration and hole mobility, irrespective of the type of alkali used. Additionally, the activation energy of conductivity – linked to the GB barrier height – decreased with an increase in alkali concentration. All of the above results are consistent with the grain boundary passivation model. To further test this hypothesis, experimental results were compared with SCAPS simulations of a multigrain CIGS thin film with varied concentration of donor defects located at the GBs. These simulations were in good quantitative agreement with experimental results with regards to conductivity, free hole concentration and GB barrier height.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Semiconductor materials and interfaces · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Anomalous grain boundary physics in polycrystalline CuInSe2: the existence of a hole barrier10.1103/PhysRevLett.91.266401 ↗
2. The impact of charged grain boundaries on thin-film solar cells and characterization10.1063/1.2042530 ↗
3. Comparison of polycrystalline and epitaxial Cu(In, Ga)Se2 solar cells with conversion efficiencies of more than 2110.1016/j.solmat.2024.112791 ↗
4. Electrically benign behavior of grain boundaries in polycrystalline CuInSe2 films10.1103/PhysRevLett.99.235504 ↗
5. Grain boundaries in Cu(in, Ga)Se2: a review of composition–electronic property relationships by atom probe tomography and correlative microscopy10.1002/adfm.202103119 ↗
6. Local built-in potential on grain boundary of Cu(In,Ga)Se 2 thin films10.1063/1.1737796 ↗
7. Does the local built-in potential on grain boundaries of Cu(In,Ga)Se 2 thin films benefit photovoltaic performance of the device?10.1063/1.1793346 ↗
8. Grain boundaries in Cu(In,Ga)(Se,S)2 thin-film solar cells10.1007/s00339-008-4978-0 ↗
9. Reversibility of (Ag,Cu)(In,Ga)Se2 electrical properties with the addition and removal of Na: role of grain boundaries10.1063/1.4915334 ↗
10. Effects of Na incorporation on electrical properties of Cu(In,Ga)Se2-based photovoltaic devices on polyimide substrates10.1016/j.solmat.2014.05.009 ↗
11. Electrical activity at grain boundaries of Cu(In,Ga)Se 2 thin films10.1103/PhysRevB.71.033306 ↗
12. Potassium versus sodium in Cu(In,Ga)Se 2 —similarities and differences in the electrical characteristics of solar cells and thin films after NaF or KF postdeposition treatment10.1002/pssr.202100459 ↗
13. Impact of different Na-incorporating methods on Cu(In,Ga)Se_2 thin film solar cells with a low-Na substrate10.1364/AO.49.001662 ↗
14. Effect of Na doping using Na2S on the structure and photovoltaic properties of CIGS solar cells10.1016/j.cap.2010.11.019 ↗
15. ZnO/CdS/CuInSe 2 thin‐film solar cells with improved performance10.1063/1.108867 ↗
16. Effect of sodium on material and device quality in low temperature deposited Cu(In,Ga)Se210.1016/j.solmat.2013.08.029 ↗
17. Efficiency enhancement of Cu(In,Ga)Se2 solar cells due to post-deposition Na incorporation10.1063/1.1646758 ↗
18. Impact of substrate temperature during NaF and KF post-deposition treatments on chemical and optoelectronic properties of alkali-free Cu(In,Ga)Se2 thin film solar cell absorbers10.1016/j.tsf.2021.138979 ↗
19. Na-induced variations in the structural, optical, and electrical properties of Cu (In,Ga) Se2 thin films10.1063/1.3190528 ↗
20. Influence of substrates on the electrical properties of Cu(In,Ga)Se2 thin films10.1016/0927-0248(95)00105-0 ↗
21. Efficiency enhancement of Cu(In,Ga)Se2 thin-film solar cells by a post-deposition treatment with potassium fluoride10.1002/pssr.201307238 ↗
22. Unveiling the effects of post-deposition treatment with different alkaline elements on the electronic properties of CIGS thin film solar cells10.1039/c4cp00614c ↗
23. Incorporation of Na in Cu(In,Ga)Se2 thin-film solar cells: a statistical comparison between Na from soda-lime glass and from a precursor layer of NaF10.1109/JPHOTOV.2014.2357261 ↗
24. Rudmann
25. Effects of NaF coevaporation on structural properties of Cu(In,Ga)Se2 thin films10.1016/S0040-6090(03)00246-3 ↗
26. Atomic-scale distribution of impurities in cuinse2-based thin-film solar cells10.1016/j.ultramic.2010.12.034 ↗
27. Unraveling interface characteristics of Zn(O,S)/Cu(In,Ga)Se2 at nanoscale: enhanced hole transport by tuning band offsets10.1016/j.apsusc.2019.144782 ↗
28. Comparative atom probe study of Cu(In,Ga)Se 2 thin-film solar cells deposited on soda-lime glass and mild steel substrates10.1063/1.3665723 ↗
29. Na distribution in Cu(In,Ga)Se2 thin films: Investigation by atom probe tomography10.1016/j.scriptamat.2015.03.028 ↗
30. Atom probe study of sodium distribution in polycrystalline Cu(In,Ga)Se2 thin film10.1016/j.actamat.2009.12.049 ↗
31. CIGS thin-film solar cells and modules on enamelled steel substrates10.1016/j.solmat.2012.01.004 ↗
32. Degradation of CIGS solar cells due to the migration of alkali-elements
33. Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells10.1038/nmat3789 ↗
34. Passivation of deep-level defects by cesium fluoride post-deposition treatment for improved device performance of Cu(in,Ga)Se2 solar cells10.1021/acsami.9b08316 ↗
35. Na-diffusion enhanced p-type conductivity in Cu(In,Ga)Se2: a new mechanism for efficient doping in semiconductors10.1002/aenm.201601191 ↗
36. On the role of Na and modifications to Cu(In,Ga)Se2 absorber materials using thin-MF (M = Na, K, Cs) precursor layers
37. Effects of sodium on polycrystalline Cu(In,Ga)Se2 and its solar cell performance10.1002/(SICI)1521-4095(199801)10:1<31::AID-ADMA31>3.0.CO;2-3 ↗
38. Effects of Na on the electrical and structural properties of CuInSe210.1063/1.370534 ↗
39. A simulation study on the effect of sodium on grain boundary passivation in CIGS thin-film solar cells
40. Spatially resolved recombination analysis of CuInxGa1-xSe2 absorbers with alkali postdeposition treatments10.1109/JPHOTOV.2018.2863567 ↗
41. Evolution of the electrical characteristics of Cu(In,Ga)Se 2 devices with sodium content10.1063/5.0025183 ↗
42. Photovoltage decay measurements by photo-assisted Kelvin probe Force microscopy on Cu(in,Ga)Se 2 solar cells10.1109/JPHOTOV.2018.2885835 ↗
43. Evidence of enhanced carrier collection in Cu(In,Ga)Se2 grain boundaries: correlation with microstructure10.1021/acsami.8b02328 ↗
44. Interconnection between trait, structure, and composition of grain boundaries in Cu(In,Ga)Se 2 thin‐film solar cells
45. The electrical properties of polycrystalline silicon films10.1063/1.321593 ↗
46. Transport properties of polycrystalline silicon films10.1063/1.324477 ↗
47. Charge carrier transport in polycrystalline CuGaSe2 thin films
48. CuInS2 thin films: preparation and properties10.1063/1.321521 ↗
49. Electrical conductivity of p ‐type CuInSe 2 thin films10.1063/1.96343 ↗
50. Influence of Cu content on electronic transport and shunting behavior of Cu(In,Ga)Se2 solar cells10.1063/1.2159548 ↗
51. Current routes in polycrystalline CuInSe2 and Cu(In,Ga)Se2 films10.1016/j.solmat.2006.08.006 ↗
52. Recent progress in nanoelectrical characterizations of CdTe and Cu(In,Ga)Se2
53. Effect of the KF post-deposition treatment on grain boundary properties in Cu(In, Ga)Se2 thin films10.1038/srep41361 ↗
54. Direct evidence for grain boundary passivation in Cu(In,Ga)Se2 solar cells through alkali-fluoride post-deposition treatments10.1038/s41467-019-11996-y ↗
55. A. Niemegeers, M. Burgelman, K. Decock, S. Degrave, J. Verschraegen, Simulation programme SCAPS-1D for thin film solar cells developed at ELIS, University of Gent, (n.d.). https://scaps.elis.ugent.be/.
56. Consequences of grain boundary barriers on electrical characteristics of CIGS solar cells10.1016/j.solmat.2023.112252 ↗