Comprehensive consideration of light soaking improvement for silicon heterojunction solar cells
Source abstract
Abstract
Monocrystalline/Amorphous silicon heterojunction (SHJ) solar cells exhibit improved power conversion efficiency ( PCE) by virtue of light soaking (LS), because photons activate effective doping of B/P atoms by promoting the movement of metastable H atoms in the amorphous silicon (a-Si:H) network. In this article, a comprehensive consideration of irradiation intensity, temperature and time duration on the LS enhancement are further investigated. We propose the necessity of thermal assistance for LS, it not only provides more phonon-assisted movement of weak bonding H, but also reduces the disorder and defect density of a-Si:H films via decreasing the weakly bonded H concentration and changing the Si-H bond configuration. Thermally-assisted light soaking also improves the electrical property and field passivation property of doped a-Si:H and strengthens a-Si:H/c-Si heterogeneous interfaces. However, very high temperature or persistent heating decreases cell performance caused by degradation of chemical passivation. In our experiment, the optimal gain of PCE of 0.33% abs is obtained through a brief LS at 7000 W/m 2 irradiation intensity under 135 °C for 60 s.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Improved interface microstructure between crystalline silicon and nanocrystalline silicon oxide window layer of silicon heterojunction solar cells10.1016/j.solmat.2023.112652 ↗
2. Ga-doped ZnO rear transparent contact enables high efficiency silicon heterojunction solar cells10.1016/j.solmat.2023.112244 ↗
3. Role of the buffer at the interface of intrinsic a-Si:H and p-type a-Si: H on amorphous/crystalline silicon heterojunction solar cells10.1063/1.4936196 ↗
4. High mobility transparent conductive W-doped In2O3 thin films prepared at low substrate temperature and its application to solar cells10.1016/j.solmat.2013.11.030 ↗
5. High-performance multiple-doped In2O3 transparent conductive oxide films in near-infrared light region10.1063/5.0103270 ↗
6. Recent progress in flexible organic solar cells10.1016/j.esci.2022.10.010 ↗
7. Flexible solar cells based on foldable silicon wafers with blunted edges10.1038/s41586-023-05921-z ↗
8. Gate driver based on a-Si:H thin-film transistors with two-step-bootstrapping structure for high-resolution and high-frame-rate displays10.1109/TED.2017.2710180 ↗
9. Mesoporous amorphous silicon: a simple synthesis of a high-rate and long-life anode material for lithium-ion batteries10.1002/anie.201608146 ↗
10. Photovoltaic technology: the case for thin-film solar cells10.1126/science.285.5428.692 ↗
11. Damp-heat-stable, high-efficiency, industrial-size silicon heterojunction solar cells10.1016/j.joule.2020.03.003 ↗
12. Monolithic perovskite/silicon tandem solar cell with >29% efficiency by enhanced hole extraction10.1126/science.abd4016 ↗
13. Reversible conductivity changes in discharge produced amorphous Si10.1063/1.89674 ↗
14. Light induced dangling bonds in hydrogenated amorphous silicon10.1063/1.92402 ↗
15. Light induced metastable defects in hydrogenated amorphous-Silicon - a systematic study10.1103/PhysRevB.32.23 ↗
16. Hydrogenated microvoids and light-induced degradation of amorphous silicon solar cells10.1007/BF00616053 ↗
17. Hydrogen collision model: quantitative description of metastability in amorphous silicon10.1103/PhysRevB.59.5498 ↗
18. Minority carrier lifetime degradation in boron-doped Czochralski silicon10.1063/1.1389076 ↗
19. Light induced changes in the amorphous-crystalline silicon heterointerface10.1063/1.4821235 ↗
20. Light-induced performance increase of silicon heterojunction solar cells10.1063/1.4964835 ↗
21. Increasing the efficiency of silicon heterojunction solar cells and modules by light soaking10.1016/j.solmat.2017.06.023 ↗
22. Understanding the improvement of silicon heterojunction solar cells under light soaking
23. Light-induced performance of SHJ solar modules under 2000 h illumination10.1016/j.solmat.2021.111459 ↗
24. High-intensity illuminated annealing of industrial SHJ solar cells: a pilot study10.1109/JPHOTOV.2021.3122932 ↗
25. Light-induced activation of boron doping in hydrogenated amorphous silicon for over 25% efficiency silicon solar cells10.1038/s41560-022-01018-5 ↗
26. Reassessment of silicon heterojunction cell performance under operating conditions10.1016/j.solmat.2022.111951 ↗
27. Electrical activity of boron and phosphorus in hydrogenated amorphous silicon10.1103/PhysRevApplied.2.054005 ↗
28. Intensive light soaking improves electricity generation of silicon heterojunction solar cells by the anomalous Staebler–Wronski effect10.35848/1882-0786/ac8784 ↗
29. Explicit model of photovoltaic panels to determine voltages and currents at the maximum power point10.1016/j.solener.2010.12.022 ↗
30. Light induced metastable defects in amorphous silicon - the role of hydrogen10.1063/1.97022 ↗
31. Infrared and Raman spectra of the silicon-hydrogen bonds in amorphous silicon prepared by glow discharge and sputtering10.1103/PhysRevB.16.3556 ↗
32. Infrared absorption strength and hydrogen content of hydrogenated amorphous silicon10.1103/PhysRevB.45.13367 ↗
33. Achieving high efficiency silicon heterojunction solar cells by applying high hydrogen content amorphous silicon as epitaxial-free buffer layers10.1016/j.tsf.2020.138305 ↗
34. Microstructure and the light‐induced metastability in hydrogenated amorphous silicon10.1063/1.99089 ↗
35. Model for a-Si:H/c-Si interface recombination based on the amphoteric nature of silicon dangling bonds10.1103/PhysRevB.76.035326 ↗