Summary of the 11th Workshop on Metallization and Interconnection for Crystalline Silicon Solar Cells
Source abstract
Abstract
This article reports on the 11th Workshop on Metallization and Interconnection for Crystalline Silicon Solar Cells, which took place in May 2023 in Neuchâtel, Switzerland. An important observation at the workshop was that, while screen printing is still dominating metallization, alternative pastes with increasing Cu content are starting to be implemented in the industry in response to the need to decrease cost and improve sustainability. Compared to previous workshops, interconnection topics were more prevalent in this edition because of the need for interconnection solutions that work at lower temperatures, as is needed for emerging solar cell technologies. Electrically conductive adhesives (ECA) have gained in importance in this respect. Understanding of reliability aspects and insight into proper characterization of ECAs are increasing, yet the challenge is here is to substantially further reduce cost and silver content.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Photovoltaic Systems and Sustainability · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Design, development and analysis of large-area industrial silicon solar cells featuring a full area polysilicon based passivating contact on the rear and selective passivating contacts on the front10.1016/j.solmat.2023.112351 ↗
2. Screen-printed metallization for industrial solar cells – current perspectives and future opportunities
3. Misaki · 2023 · 1
4. Misaki · 2023
5. Fundamental microscopic studies on the etching behavior of silver pastes on poly-Si/SiOx passivating contacts10.1016/j.solmat.2023.112516 ↗
6. Glatthaar · 2023
7. Paste-based silver reduction for iTOPCon rear side metallization10.1016/j.solmat.2023.112646 ↗
8. Ourinson · 2023
9. Future challenges for photovoltaic manufacturing at the terawatt level10.1063/5.0020380 ↗
10. Design considerations for multi-terawatt scale manufacturing of existing and future photovoltaic technologies: challenges and opportunities related to silver, indium and bismuth consumption10.1039/D1EE01814K ↗
11. Barrou · 2023
12. Pernoud · 2023
13. Research and development of low temperature pastes for silicon heterojunction solar cells
14. Screen printable fire through nickel contacts for silicon solar cells10.1016/j.solmat.2023.112528 ↗
15. Unsur · 2023
16. Screen printable copper pastes for silicon solar cells10.1016/j.solmat.2023.112633 ↗
17. Druffel · 2023
18. Optimizing solar cells metallization by parallel dispensing
19. Van de Voorde · 2023
20. Bertoni · 2023
21. Cornago · 2023
22. Stability of MINIMODULES with copper
23. R. Kopecek, F. Buchholz, V.D. Mihailetchi, J. Libal, N. Chen, IBC Technology Targeting Fast and Effective Silver Reduction Applying Advanced Screen Printing, (n.d).
24. Improvement of solder interconnections applied on back contact solar cells with low-T Cu paste busbars Motivation : do we have enough silver
25. Low-temperature metallization & interconnection for silicon heterojunction and perovskite silicon tandem solar cells10.1016/j.solmat.2023.112515 ↗
26. De Rose · 2023
27. Progress on the reduction of silver consumption in metallization of silicon heterojunction solar cells10.1016/j.solmat.2023.112620 ↗
28. Pingel · 2023
29. The real power of SmartWire connection technology MB drives technology and productivity in PV
30. Silicon heterojunction solar cells: solder, process and equipment qualification
31. Assessment of 3D micro-computed tomography for PV interconnection technology development10.1016/j.solmat.2022.112100 ↗
32. Investigation of multi-wire interconnected lightweight PV modules using micro-computed tomography F0A7 introduction F0A7 motivation for lightweight modules F0A7 experimental setup F0A7 sample preparation and experimental matrix
33. Stability of black interconnect coatings for solar photovoltaic module applications10.1016/j.solmat.2023.112540 ↗
34. Block · 2023
35. Methodology of ECA material characterization and qualification
36. Validation of methodology to determine the contact resistivity of ECA – based bonds
37. Reduction of silver usage in ECA based interconnection Challenges of TW scale PV manufacturing
38. Electrically conductive adhesive-free interconnection of shingle solar cells10.1016/j.solmat.2023.112517 ↗
39. Weber · 2023
40. Shingling meets perovskite-silicon heterojunction tandem solar cells
41. Summary of the 10thworkshop on metallization and interconnection for crystalline silicon solar cells10.1063/5.0126230 ↗
42. Results of the survey conducted during 7th workshop on metallization and interconnection for crystalline silicon solar cells10.2139/ssrn.3152250 ↗
43. The future of metallization - results from questionnaires of the four workshops from 2008 to 201310.1016/j.egypro.2013.11.083 ↗
44. The future of metallization - forecast of the experts of the 5th metallization workshop10.1016/j.egypro.2015.03.283 ↗
45. The future of metallization and interconnection - forecast of experts of the 6th metallization workshop10.1016/j.egypro.2016.10.090 ↗
46. Summary of the 9th workshop on metallization and interconnection for crystalline silicon solar cells10.1063/5.0055981 ↗
47. https://www.bullionbypost.ie/silver-price/15year/ounces/EUR/as on 02.01.2024, (n.d.) .