journal article·2026-03Open access

Enhancing light-to-thermal conversion performance of flexible EPDM/GNPs/PW phase change composites via salt-assisted EG exfoliation

Zhanjin Shi, Zhigang Liu, Bingqing Quan, Han Yan, Mengjie Sheng, Chuanbiao Zhu, Xiangyu Yan, Xinpeng Hu, Xiang Lu, Jinping Qu

Abstract

The development of high-efficiency energy conversion and storage systems for stable and controllable solar energy utilization remains a major challenge. Organic phase change materials (PCMs), such as paraffin wax (PW), show promise in addressing this issue but are limited by leakage problems, inadequate flexibility, and low light absorption efficiency. To address these challenges, this study develops a scalable, salt-assisted roll-to-roll processing strategy to fabricate flexible phase change composites (PCCs) with excellent light absorption capability and effective encapsulation of PW. This strategy employs a synergistic mechanical force and salt template interactions to simultaneously exfoliate expanded graphite (EG) and orient the resulting nanoplatelets in-plane. The resulting EPDM/GNPs/PW PCCs exhibit a densely packed, aligned architecture of graphite nanoplatelets (GNPs), which significantly enhances the light-absorption area and markedly increases the light absorption efficiency from 39.9% to 93.7%. Moreover, the incorporation of GNPs as a reinforcing phase, which also provides an anchoring effect on the PW, contributes to a tensile strength of 4.8 MPa, an elongation at break of 1108.1%, and an initial latent heat of 106.4 J/g. Remarkably, the composites retain a latent heat (ΔH m ) exceeding 100 J/g after 500 thermal cycles, demonstrating exceptional durability. Consequently, this work offers a cost-effective and scalable strategy for fabricating highly flexible PCCs with efficient light-thermal conversion, holding promise for advancing solar energy applications.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Solar-Powered Water Purification Methods

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Biomimetic urchin-like structure of Re/ReS2/ZnS/NDC for high performance photothermal water evaporation and electricity generation10.1016/j.cej.2025.160550 ↗
2. Optimal scheduling of multiple entities in virtual power plant based on the master-slave game10.1016/j.apenergy.2024.124286 ↗
3. Large-scale production of spent coffee ground-based photothermal materials for high-efficiency solar-driven interfacial evaporation10.1016/j.cej.2022.140361 ↗
4. Solar energy integration in buildings10.1016/j.apenergy.2020.114740 ↗
5. Intermittent solar power hybrid forecasting system based on pattern recognition and feature extraction10.1016/j.enconman.2022.116579 ↗
6. A novel form stable PCM based bio composite material for solar thermal energy storage applications10.1016/j.est.2020.101403 ↗
7. Phase change material-integrated latent heat storage systems for sustainable energy solutions10.1039/D1EE00527H ↗
8. Recent advances and perspectives in solar photothermal conversion and storage systems: a review10.1016/j.cis.2024.103118 ↗
9. 3D porous nanostructured Ni3 N–Co3 N as a robust electrode material for glucose fuel cell10.1039/C9RA08812A ↗
10. Solar energy storage at an atomically defined organic-oxide hybrid interface10.1038/s41467-019-10263-4 ↗
11. Fish-inspired dynamic charging for ultrafast self-protective solar-thermal energy storage10.1126/sciadv.adr8445 ↗
12. Novel latent heat storage systems based on liquid metal matrices with suspended phase change material microparticles10.1021/acsami.3c05887 ↗
13. Synergistically networked 1D/2D/3D phase change composites with Ultra-Fast contactless thermal energy conversion and enhanced electromagnetic interference shielding performance10.1016/j.cej.2024.158915 ↗
14. Polymer engineering in phase change thermal storage materials
15. Thermal characteristics enhancement of paraffin wax phase change material (PCM) for thermal storage applications10.1016/j.renene.2024.119986 ↗
16. Self-assembly of binderless MXene aerogel for multiple-scenario and responsive phase change composites with ultrahigh thermal energy storage density and exceptional electromagnetic interference shielding10.1007/s40820-023-01288-y ↗
17. Novel smart textile with phase change materials encapsulated core-sheath structure fabricated by coaxial electrospinning10.1016/j.cej.2018.08.189 ↗
18. Leakage proof, flame-retardant, and electromagnetic shield wood morphology genetic composite phase change materials for solar thermal energy harvesting10.1007/s40820-024-01414-4 ↗
19. Thermal expansion challenges and solution strategies for phase change material encapsulation: a comprehensive review10.1002/adfm.202409884 ↗
20. An intelligent, solar‐responsive, and thermally conductive phase‐change system toward solar‐thermal‐electrical conversion featuring daytime blooming for solar energy harvesting and nighttime closing for thermal preservation10.1002/adfm.202406236 ↗
21. Synthesis of flexible form stable phase change materials with in-situ formed porous TiO2 for personal thermal management
22. Surface‐engineered cenospheres encapsulating phase change materials for functional cementitious composites
23. Anisotropically conductive phase change composites enabled by aligned continuous carbon fibers for full-spectrum solar thermal energy harvesting10.1016/j.cej.2023.141940 ↗
24. Polymer encapsulation strategy toward 3D printable, sustainable, and reliable form-stable phase change materials for advanced thermal energy storage10.1021/acsami.1c23972 ↗
25. Integration of sustainable polymers with phase change materials10.1016/j.pmatsci.2025.101447 ↗
26. Large-scale fabrication of flexible EPDM/MXene/PW phase change composites with excellent light-to-thermal conversion efficiency via water-assisted melt blending10.1016/j.compositesa.2021.106713 ↗
27. Wu
28. Ultraflexible, cost-effective and scalable polymer-based phase change composites via chemical cross-linking for wearable thermal management10.1038/s41467-023-43772-4 ↗
29. Light-thermal-electric energy conversion based on polyethylene glycol infiltrated carboxymethylcellulose sodium-derived carbon aerogel10.1016/j.enconman.2022.115948 ↗
30. Hierarchical carbon foams with tunable MOF nanostructure for improving solar-thermal conversion performance of phase change materials10.1016/j.carbon.2025.120161 ↗
31. Fe3O4/carbon-decorated graphene boosts photothermal conversion and storage of phase change materials10.1016/j.jcis.2023.12.015 ↗
32. Comparative study of single-walled carbon nanotubes and graphene nanoplatelets for improving the thermal conductivity and solar-to-light conversion of PEG-infiltrated phase-change material composites10.1021/acssuschemeng.8b05335 ↗
33. Ti3C2Tx MXene/delignified wood supported flame-retardant phase-change composites with superior solar-thermal conversion efficiency and highly electromagnetic interference shielding for efficient thermal management10.1016/j.energy.2023.129441 ↗
34. Advances in photothermal regulation strategies: from efficient solar heating to daytime passive cooling10.1039/D3CS00500C ↗
35. Properties of two-dimensional Ti3C2 MXene/thermoplastic polyurethane nanocomposites with effective reinforcement via melt blending10.1016/j.compscitech.2019.107710 ↗
36. A polymer nanocomposite with strong full‐spectrum solar absorption and infrared emission for all‐day thermal energy management and conversion
37. A perspective for developing polymer-based electromagnetic interference shielding composites10.1007/s40820-022-00843-3 ↗
38. Multiple shearing-induced high alignment in polyethylene/graphene films for enhancing thermal conductivity and solar-thermal conversion performance10.1016/j.cej.2023.148062 ↗
39. From anisotropic graphene aerogels to electron- and photo-driven phase change composites10.1039/C6TA07587H ↗
40. Continuous production of multifunctional porous materials via photo-crosslinking of ice templated emulsions10.1007/s40843-022-2421-6 ↗
41. A new strategy to prepare MLG-SiCw/SiCp composites via three-roll milling exfoliation and catalytical-conversion for advanced refractories10.1016/j.ceramint.2024.09.329 ↗
42. Mass production of 2D materials by intermediate-assisted grinding exfoliation10.1093/nsr/nwz156 ↗
43. Continuous mixing process and properties of NR/CB nanocomposites based on elongational rheology10.1016/j.compositesb.2022.109705 ↗
44. Scalable fabrication of bioinspired flexible sensor with gradient modulus and conductivity for intelligent gait recognition
45. Form-stable paraffin/graphene aerogel/copper foam composite phase change material for solar energy conversion and storage10.1016/j.solmat.2021.111083 ↗
46. Investigation of the microstructure, mechanical properties and thermal degradation kinetics of EPDM under thermo-stress conditions used for joint sealing of floating prefabricated concrete platform of offshore wind power10.1016/j.conbuildmat.2025.141897 ↗
47. Measurement of thermal properties and passive cooling of lithium-ion batteries using h-BNNSs and MXene based composite phase change material10.1016/j.est.2025.117809 ↗
48. In situ intercalation polymerization approach to polyamide-6/graphite nanoflakes for enhanced thermal conductivity10.1016/j.compositesb.2017.02.043 ↗
49. Promoting hydrogen generation from the hydrolysis of Mg-Graphite composites by plasma-assisted milling10.1016/j.energy.2018.11.029 ↗
50. Engineering robust multifunctional composites with enhanced electromagnetic interference shielding and all-weather thermal management capability via simple layer-by-layer assembly10.1016/j.cej.2022.137423 ↗