journal article·2025-08Open access

Less is more: Enabling low-filled electrically conductive adhesives for shingled solar cell interconnection using the capillary suspension concept

Marianne Kronsbein, Leonhard Böck, Katrin Dyhr, Torsten Rößler, Norbert Willenbacher

Abstract

Lead-free, low temperature materials for solar cell interconnection gain relevance in upcoming cell and module concepts. Electrically Conductive Adhesives (ECAs) are such materials but typically come with a high silver content. We herein give an overview on ECA requirements for shingled cell interconnection. Regular ECAs and stabilized ECAs with varying filler content were characterized regarding their rheological, curing, electrical and mechanical behaviour and their performance in modules. It was found that 20 vol% silver is necessary to meet the electrical requirements with a regular epoxy-based ECA containing micron-sized silver flakes. Regarding mechanical properties, as little filler as possible is favourable. To fulfil both the electrical and mechanical requirements, application of the capillary suspension concept to ECAs was found to be suitable. Such an ECA with only 5 vol% silver filler exhibits a volume and contact resistivity of (4.5 ± 0.5) 10 −3 Ω cm and (0.026 ± 0.006) mΩ cm 2 , resp., and a high lap-shear strength of (17 ± 4) MPa. Testing at both 140 °C and 200 °C curing temperatures showed that modules with low-filled and highly-filled ECAs achieved comparable initial efficiencies. After damp heat (DH500) testing, modules with capillary suspension ECA showed an efficiency loss of −0.8 % ± 0.4 %, compared to −2.5 % ± 1.1 % for highly-filled ECA. After thermal cycling (TC200), losses were −0.6 % ± 0.5 % versus −1.1 % ± 0.5 %. Both ECA types maintained efficiency losses below 1 % in mechanical load tests. These results demonstrate the potential for silver reduction in shingled solar cell modules through the capillary suspension concept. • Applying the capillary suspension concept decreases the percolation threshold in ECAs. • Particle network formation leads to stabilization at low shear and low resistivity. • Less filler leads to superior mechanical strength. • Solar modules with low-filled capillary suspension ECAs perform well in ageing tests.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Nanomaterials and Printing Technologies · Advanced Sensor and Energy Harvesting Materials · Modular Robots and Swarm Intelligence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Wolfson
2. Li · 2010
3. Review of recent advances in electrically conductive adhesive materials and technologies in electronic packaging10.1163/156856108X320519 ↗
4. Service lifetime prediction of electrically conductive adhesives-based shingled PV module10.1109/JPHOTOV.2022.3141343 ↗
5. Electrically conductive adhesives as cell interconnection material in shingled module technology
6. A comparison analysis on the efficiency of solar cells of shingled structure with various ECA materials10.7836/kses.2019.39.4.001 ↗
7. Lead-free electrical conductive adhesives for solar cell interconnectors
8. The critical issue of using lead for sustainable massive production of perovskite solar cells: a review of relevant literature10.12688/openreseurope.13428.1 ↗
9. 2011
10. Devoto
11. Optimization of electrically conductive adhesive bonds in photovoltaic modules10.1109/JPHOTOV.2018.2828829 ↗
12. 2024
13. Validation of advanced photovoltaic module materials and processes by combined-accelerated stress testing (C-ast)
14. A comprehensive study of module layouts for silicon solar cells under partial shading10.1109/JPHOTOV.2022.3144635 ↗
15. Shingling technology for cell interconnection: technological aspects and process integration10.1016/j.egypro.2018.09.010 ↗
16. Shingled cell interconnection: a new generation of bifacial PV-modules10.2139/ssrn.3152478 ↗
17. Cell-to-Module (CTM) analysis for photovoltaic modules with shingled solar cells
18. Development of shingle matrix technology for integrated PV applications, 8th world conference on photovoltaic
19. Klasen · 2023
20. Materials challenge for shingled cells interconnection10.1016/j.egypro.2016.10.087 ↗
21. The silver learning curve for photovoltaics and projected silver demand for net‐zero emissions by 205010.1002/pip.3661 ↗
22. Conductivity enhancement of polymer composites using high-temperature short-time treated silver fillers10.1016/j.compositesa.2017.05.007 ↗
23. Electrical property improvement of electrically conductive adhesives through in-situ replacement by short-chain difunctional acids10.1109/TCAPT.2006.870388 ↗
24. The effect of functionalized silver on rheological and electrical properties of conductive adhesives10.1149/1.3567678 ↗
25. Printable elastic conductors by in situ formation of silver nanoparticles from silver flakes10.1038/nmat4904 ↗
26. Research on electrical conductive adhesives filled with mixed filler10.1016/j.ijadhadh.2013.07.001 ↗
27. Capillary forces in suspension rheology10.1126/science.1199243 ↗
28. Particle configurations and gelation in capillary suspensions10.1039/c2sm07347a ↗
29. Enhanced conductivity induced by attractive capillary force in ternary conductive adhesive10.1016/j.compscitech.2016.10.028 ↗
30. Conductivity enhancement of thermal interface material via capillary attraction
31. Ultrastretchable conductive elastomers with a low percolation threshold for printed soft electronics10.1021/acsami.9b11071 ↗
32. The behavior of capillary suspensions at diverse length scales: from single capillary bridges to bulk10.1016/j.cocis.2021.101557 ↗
33. Metallic gels for conductive 3D and 4D printing10.1016/j.matt.2023.06.015 ↗
34. Schramm · 2000
35. Devoto
36. Characterization of mechanical strength of shingle joints using die shear tests10.52825/siliconpv.v1i.944 ↗
37. In situ observation of heat-induced degradation of perovskite solar cells10.1038/nenergy.2015.12 ↗
38. Progress in shingle interconnection based on electrically conductive adhesives at Fraunhofer ISE
39. How to assess the electrical quality of solar cell interconnection in shingle solar modules10.1002/pip.3699 ↗
40. Evaluation of electrical conductivity models for conductive polymer composites10.1002/app.10014 ↗
41. Materials characterization, conduction development, and curing effects on reliability of isotropically conductive adhesives10.1109/95.679028 ↗
42. Effects of coupling agents on the properties of epoxy-based electrically conductive adhesives10.1016/j.ijadhadh.2005.06.005 ↗
43. Manufacture and filtration performance of glass filters made from capillary suspensions10.1016/j.seppur.2023.125097 ↗
44. Enhanced conductivity induced by attractive capillary force in ternary conductive adhesive10.1016/j.compscitech.2016.10.028 ↗
45. How rheological properties affect fine-line screen printing of pastes: a combined rheological and high-speed video imaging study10.1007/s11998-018-0091-2 ↗
46. 3D printing by multiphase silicone/water capillary inks10.1002/adma.201701554 ↗
47. A review on epoxy-based electrically conductive adhesives10.1016/j.ijadhadh.2020.102596 ↗
48. Perovskite solar cells: thermal and chemical stability improvement, and economic analysis
49. In situ observation of heat-induced degradation of perovskite solar cells10.1038/nenergy.2015.12 ↗
50. Geipel · 2018
51. Lamination of transparent conductive adhesives for tandem solar cell applications10.1088/1361-6463/abe2c4 ↗
52. Electrical reliability of electrically conductive adhesive joints: dependence on curing condition and current density10.1016/S0026-2692(01)00007-6 ↗
53. Progress in shingle interconnection based on electrically conductive adhesives at Fraunhofer ISE
54. A study on correlation peel strength and the efficiency of shingled modules according to curing condition of electrically conductive adhesives
55. Statistical analysis of 12 years of standardized accelerated aging in photovoltaic‐module certification tests10.1002/pip.3450 ↗