journal article·2025-04

The laser-damage repairing on the front surface of the N-type TOPCon solar cells with electroplated electrodes

Meixian Huang, Xi Xi, Jianbo Shao, Jingjia Ji, Yusen Qin, Song Zhang, Chengming Song, Guilin Liu, Zhipeng Liu, Meilin Peng, Qiqi Wang, Meiling Zhang

Publisher page

Abstract

Electroplating electrodes, a significant technique in the metallization of Tunnel Oxide Passivated Contact (TOPCon) solar cell, have gradually become a research issue. Although laser ablation effectively removed the insulating passivation layer for subsequent metal ion deposition, laser ablation treatment inevitably caused laser-damage to the cell surface. For N-type TOPCon solar cells, laser-damage on the front surface directly impacts the P + emitter layer, significantly affecting the power conversion efficiency of the solar cells. Therefore, this study focused on novel laser repair methods to facilitate electroplated metallization, thereby enhancing the power conversion efficiency of the TOPCon solar cells. Initially, the Raman spectrum method was introduced to calculate the crystallinity of the laser ablation area and evaluate the damage to the cell surface caused by laser slotting. Subsequently, a high-temperature annealing treatment was carried out, and the optimum temperature for the annealing repair method was determined based on implied open circuit voltage ( iV oc) detection. The high-temperature annealing process was improved to assist electroplating metallization for repairing laser-damage. Also, XRD detection was introduced to clarify that the repair effect of laser-damage was limited by the generated SiAlON complex. Additionally, a pre-cleaning of HF solution before electroplating was performed to remove oxidation defects. Compared to TOPCon solar cells without laser-damage repair, the power conversion efficiency of N-type TOPCon solar cells treated with electroplating technique increased to 24.85 %, with an increase of 1.44% abs.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · solar cell performance optimization · Photovoltaic System Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
2. Tunnel oxide passivated carrier-selective contacts based on ultra-thin SiO2 layers10.1016/j.solmat.2015.06.048 ↗
3. Solar cell efficiency tables (Version 63)10.1002/pip.3750 ↗
4. Surface passivation of crystalline silicon solar cells: past, present and future
5. Reassessment of the limiting efficiency for crystalline silicon solar cells10.1109/JPHOTOV.2013.2270351 ↗
6. Challenges facing copper-plated metallisation for silicon photovoltaics: insights from integrated circuit technology development10.1002/pip.3062 ↗
7. Enabling savings in silver consumption and poly-Si thickness by integration of plated Ni/Cu/Ag contacts for bifacial TOPCon solar cells10.1016/j.solmat.2022.111889 ↗
8. Review of the potential of the Ni/Cu plating technique for crystalline silicon solar cells10.3390/ma7021318 ↗
9. Optimal design of narrow line-width front contact grid pattern for silicon solar cells and low-cost fabrication of electroless nickel plated imprint lithography hard stamp10.1002/adem.201900734 ↗
10. Progress of plated metallization for industrial bifacial TOPCon silicon solar cells10.1002/pip.3528 ↗
11. Selective metallization of solar cells10.1108/MI-05-2014-0020 ↗
12. Cost effective process for high-efficiency solar cells10.1016/j.solener.2009.03.002 ↗
13. Non-linear absorption of femtosecond laser pulses in a SiNx layer—influence of silicon doping type10.1016/j.solmat.2013.05.004 ↗
14. Femtosecond laser ablation of dielectric layers for high efficiency silicon wafer solar cells10.1016/j.solener.2018.02.046 ↗
15. Impact of surface topography and laser pulse duration for laser ablation of solar cell front side passivating SiNx layers10.1063/1.3493204 ↗
16. Laser ablation and contact formation for Cu-plated large area C-silicon industrial solar cells
17. 266-nm ps laser ablation for copper-plated p-type selective emitter PERC silicon solar cells10.1109/JPHOTOV.2018.2834629 ↗
18. All-optical characterization of single femtosecond laser-pulse-induced amorphization in silicon10.1007/s00339-006-3583-3 ↗
19. Laser-induced oxidation of the Si (111) surface10.1007/BF00618701 ↗
20. Impact of laser-induced oxidation on silicon wafer solar cells' performance10.1109/JPHOTOV.2016.2535243 ↗
21. Raman scattering from small particle size polycrystalline silicon10.1016/0038-1098(81)91202-3 ↗
22. Promotion of microcrystallization by argon in moderately hydrogen diluted silane plasma10.1016/S0927-0248(02)00121-6 ↗
23. Bonded hydrogen in nanocrystalline silicon photovoltaic materials: impact on structure and defect density10.1063/1.3638712 ↗
24. Accurate analysis of the size distribution and crystallinity of boron doped Si nanocrystals via Raman and PL spectra10.1039/C7RA04472K ↗
25. Effects of strain on crystallization of amorphous silicon characterized by laser Raman spectroscopy10.1016/S0169-4332(97)80184-5 ↗
26. I-V analysis of high-energy lithium-ion-irradiated Si and GaAs solar cells
27. An explicit J-V model of a solar cell for simple fill factor calculation10.1016/j.solener.2011.04.030 ↗
28. Sialons and related nitrogen ceramics10.1007/BF02396649 ↗
29. Phase evolution of Y-a/b-sialon ceramic with YAG as sintering additive10.1023/A:1006761413703 ↗
30. Formation and suppression of hydrogen blisters in tunnelling oxide passivating contact for crystalline silicon solar cells10.1038/s41598-020-66801-4 ↗
31. Replacing the amorphous silicon thin layer with microcrystalline silicon thin layer in TOPCon solar cells10.1016/j.solener.2016.06.012 ↗
32. Current invariant as fundamental relation between saturation currents and band gaps for semiconductor solar cells10.1016/j.solmat.2023.112619 ↗