Thermal-hydraulic transient performance and dynamic characterization analysis of direct steam generation for parabolic trough solar collectors
Source abstract
Abstract
Parabolic trough solar direct-steam-generation (PTC-DSG) technology is a low-carbon technology by combining clean energy with green energy carriers. However, abrupt variations in solar radiation ( I) due to weather changes can significantly affect the DSG performance and stable operation. In this work, PTC-DSG system`s optical-thermal-flow-pattern transient coupling model is developed based on the Separated Flow model, Finite Volume method and Lagrangian method. The dynamic response of the loop`s transient flow law and heat transfer performance under I step-variation are analyzed, and the correlation between the DSG system`s transient flow characteristics and the multiple perturbation factors is discussed. The results reveal that adding (reducing) 12.5 % and 37.5 % of I shortens (lengthens) the evaporation phase by 7.2 % and 16.5 % (10.7 % and 16 %). The superheated zone has the greatest influence on the transient response characteristics and instability relative to the preheated and evaporated zones under various step-variations, and the heat transfer recovery still needs longer time after flow state is re-stabilized. Under I step-variation, adding mass flow can effectively shorten the superheat phase but not the response time, and the system instability range increases; Increasing inlet temperature ( T in) can augments the superheat zone, but effectively shorten the response time and regulate and improve the outlet steam quality; Raising inlet pressure not only reduces the evaporation phase, which is most favorable for heat transfer, but also requires longer re-stabilization time and increases the probability of stratified flow, which should be paid more attention.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Photovoltaic System Optimization Techniques · Heat Transfer and Boiling Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Effect of transient concentrated solar flux profile on the absorber surface for direct steam generation in the parabolic trough solar collector10.1016/j.renene.2021.12.105 ↗
2. Optical and structural optimization of a large aperture solar parabolic trough collector
3. Techno-economic analysis and environmental benefits of solar industrial process heating based on parabolic trough collectors
4. A review of solar parabolic trough collector10.1016/j.rser.2015.10.043 ↗
5. Solar thermal energy technologies and its applications for process heating and power generation e a review
6. Economic potential of solar thermal power plants with direct steam generation compared with HTF plants10.1115/1.4001672 ↗
7. Direct steam generation in parabolic trough solar collector: analytical modelling for prediction of flow pattern10.1063/1.5096497 ↗
8. Optimization of an integral flat plate collector-storage system for domestic solar water heating in Adana
9. Evaluation and optimization of melting performance for a latent heat thermal energy storage unit partially filled with porous media10.1016/j.apenergy.2017.02.019 ↗
10. Investigations of thermo-hydrodynamics, structural stability, and thermal energy storage for direct steam generation in parabolic trough solar collector: a comprehensive review10.1016/j.jclepro.2021.127550 ↗
11. Analytical modeling of direct steam generation solar power plants10.1016/j.solener.2013.09.037 ↗
12. Direct steam generation in parabolic-trough collectors: a review about the technology and a thermo-economic analysis of a hybrid system10.1016/j.rser.2017.01.176 ↗
13. Thermal load and bending analysis of heat collection element of direct-steam-generation parabolic-trough solar power plant10.1016/j.applthermaleng.2017.08.129 ↗
14. A trans-dimensional multi-physics coupled analysis method for direct-steam-generation parabolic-trough loop
15. Modeling the dynamics of the multiphase fluid in the parabolic-trough solar steam generating systems10.1016/j.enconman.2013.10.072 ↗
16. Modeling direct steam generation in solar collectors with multiphase CFD10.1016/j.apenergy.2013.08.046 ↗
17. Heat transfer analysis and modeling of a parabolic trough solar receiver implemented in engineering equation solver
18. Numerical simulation of parabolic trough solar collector: improvement using counter flow concentric circular heat exchangers10.1016/j.ijheatmasstransfer.2008.08.004 ↗
19. Hydrodynamic analysis of direct steam generation solar collectors10.1115/1.556273 ↗
20. Approaches to modelling a solar field for direct generation of industrial steam10.1016/j.renene.2016.10.081 ↗
21. Thermal and fluid dynamic analysis of direct steam generation parabolic trough collectors10.1016/j.enconman.2019.05.107 ↗
22. Numerical study of parabolic-trough direct steam generation loop in recirculation mode: characteristics, performance and general operation strategy10.1016/j.enconman.2015.02.080 ↗
23. Analysis of direct steam generation in parabolic trough solar collectors under hot climate10.1016/j.applthermaleng.2022.119502 ↗
24. Transient characteristics of a parabolic trough direct-steam-generation process10.1016/j.renene.2018.12.058 ↗
25. Generalized distribution parameter model and numerical simulation method for DSG solar trough collector under once-through mode10.1016/j.solener.2019.06.029 ↗
26. DSG under two-phase and stratified flow in a steel receiver of a parabolic trough collector10.1115/1.1463734 ↗
27. Thermohydraulic management coupled with flow pattern distinction for concentrating solar direct-steam-generation technology10.1016/j.renene.2022.12.113 ↗
28. Test results: SEGS LS-2 solar collector
29. New equations for heat and mass transfer in turbulent pipe and channel flow
30. Bergman · 2011
31. Heat flow rates in saturated nucleate pool boiling-a wide-ranging examination using reduced properties10.1016/S0065-2717(08)70205-3 ↗
32. Feldhoff · 2015
33. Numerical study of circumferential temperature difference reduction at the absorber tube of parabolic trough direct steam generation collector by inserting a twisted tape in superheated region10.1016/j.csite.2020.100720 ↗