Effects of high temperature wettability and thermal properties of glass with different Al/Ga ratios on p+ emitter metallization
Source abstract
Abstract
Ag-Al paste is a key material of n-type silicon-based solar cells. The uneven Ag/Al spike on the transmitter surface after metallization is easy to cause local short circuit, which is a bottleneck that limits its application. The glass play an indispensable role in the surface metallization of the emitter. The influence of high temperature wettability and thermal properties of glass on the metallization of p + emitter was studied from the point of view of ionic radius by adjusting the ratio of Al/Ga. The results indicated that when the Al/Ga ratio is 2:3, an abundance of free oxygen improved the O/Si ratio within the glass network structure, facilitating the depolymerization of siloxane anion cluste rs into simpler structural units in the silicate network structure. Al ions preferentially combine with free oxygen to formed [AlO 4]. The entrapment of free oxygen by [BO 3] units tended to form more [BO 4] units with increased thermal stability. The glass sample demonstrated minimal difference between left and right contact angles. The glass wet the Si wafer steadily and evenly throughout the melting process. The formation of a continuous dense glass layer increased the contacts between the metal electrode and the emitter. Not only a mass of silver crystals were deposited on the emitter surface, but also small and dense Ag/Al spikes were distributed. Excellent metallization contacts were formed with the p + emitter, which improved the solar cell`s photoelectric conversion efficiency.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thin-Film Transistor Technologies · Glass properties and applications · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Printing technologies for silicon solar cell metallization: a comprehensive review10.1002/pip.3674 ↗
2. Selective tunnel oxide passivated contact on the emitter of large-size n-type TOPCon bifacial solar cells10.1016/j.jallcom.2021.159679 ↗
3. Effect of Al2O3 film on silver paste contact formation at silicon surface10.1016/j.solener.2017.10.012 ↗
4. Formation of Ag/Al screen-printing contacts on B emitters10.1109/JPHOTOV.2014.2364117 ↗
5. Screen printing metallization of boron emitters10.1002/pip.933 ↗
6. Large area N-type multicrystalline silicon solar cells with B-emitter: efficiencies exceeding 14
7. N-type single-crystalline Si solar cells: front side metallization for solar cells reaching 20% efficiency10.1016/j.solmat.2016.05.027 ↗
8. Screen printable Ag-Al metal pastes for p+ silicon application in solar cells
9. Role of aluminum in silver paste contact to boron-doped silicon emitters
10. Towards understanding the characteristics of Ag-Al spiking on boron-doped silicon for solar cells10.1016/j.solmat.2015.11.032 ↗
11. Analysis of contact reaction phenomenon between aluminum-silver and p+ diffused layer for n-type c-Si solar cell applications10.3390/en13174537 ↗
12. Microstructural characterization and current conduction mechanisms of front-side contact of n-type crystalline Si solar cells with Ag/Al pastes10.1063/1.4921544 ↗
13. High-efficiency, single-crystalline, p- and n-type Si solar cells: microstructure and chemical analysis of the glass layer10.1016/j.solmat.2018.01.001 ↗
14. Improvement of etching ability of lead-free glass frits by compositing low content PbO nanoparticles and its effect on metallization contact of solar cells10.1016/j.matchemphys.2023.127372 ↗
15. Differently shaped Ag crystallites and four current transport paths at sintered Ag/Si interface of crystalline silicon solar cells10.1016/j.solmat.2023.112381 ↗
16. Microscopic origin of the aluminium assisted spiking effects in n-type silicon solar cells10.1016/j.solmat.2014.05.036 ↗
17. High-entropy R2O3-Y2O3-TiO2-ZrO2-Al2O3 glasses with ultrahigh hardness, Young's modulus, and indentation fracture toughness10.1016/j.isci.2021.102735 ↗
18. Comparing the effects of Ga2O3 and Al2O3 on the structure and mechanical properties of sodium borate glasses10.1016/j.jnoncrysol.2023.122506 ↗
19. The effect of alkali metal oxide on the properties of borosilicate fireproof glass: structure, thermal properties, viscosity, chemical stability10.1016/j.ceramint.2021.03.298 ↗
20. Low Li2O content study in Li2O-Al2O3-SiO2 glass-ceramics10.1016/j.jeurceramsoc.2019.07.032 ↗
21. Study on structure and performance of Bi-B-Zn sealing glass encapsulated Fiber Bragg Grating10.1016/j.ceramint.2023.01.032 ↗
22. Study of Li2O addition on crystallization behavior and thermal expansion properties of CaO-Al2O3-SiO2 (CAS) glass-ceramic and its application for joining SiC ceramic10.1016/j.jeurceramsoc.2020.10.061 ↗
23. Structural, optical and glass transition studies on Nd3+-doped lead bismuth borate glasses10.1016/S0921-4526(03)00080-2 ↗
24. Dielectric dispersion and certain other physical properties of PbO-Ga2O3-P2O5 glass system10.1016/S0167-577X(02)00631-6 ↗
25. Dependence of glass transition on the structure in BiBZn oxide glass10.1016/j.jallcom.2018.01.188 ↗
26. FTIR of binary lead borate glass: structural investigation10.1016/j.molstruc.2015.10.076 ↗
27. Borosilicate glass nanolayer as a spin-on dopant source: FTIR and spectroscopic ellipsometry investigations10.1007/s10854-016-4561-y ↗
28. Effect of Na2O content on wettability, crystallization and performances of sealing glass10.1016/j.jmrt.2023.02.073 ↗
29. Study of photoluminescence quenching in Er3+-doped tellurite glasses10.1016/j.optmat.2010.02.006 ↗
30. Er3+-ions doped lithium-bismuth-boro-phosphate glass for 1532 nm emission and efficient red emission up conversion for telecommunication and lasing applications10.1016/j.jnoncrysol.2018.04.060 ↗
31. The relationship between the structure and thermal properties of Bi2O3-ZnO-B2O3 glass system10.1155/2021/2321558 ↗
32. A novel type of borosilicate glass with excellent chemical stability and high ultraviolet transmission10.1016/j.jnoncrysol.2019.119735 ↗
33. In situ and tunable structuring of semiconductor-in-glass transparent composite10.1016/j.isci.2020.101984 ↗
34. A review of the structures of oxide glasses by Raman spectroscopy10.1039/C5RA13043C ↗
35. Formation of Pt/Pb nanoparticles by electrodeposition and redox replacement cycles on fluorine doped tin oxide glass10.1016/j.electacta.2012.10.089 ↗
36. Mechanochemical synthesis of non-solvated dialkylalumanyl anion and XPS characterization of Al(I) and Al(II) species
37. On the presence of Ga2O sub-oxide in high-pressure water vapor annealed AlGaN surface by combined XPS and first-principles methods10.1016/j.apsusc.2019.03.196 ↗
38. XPS analysis of gallium oxides10.1016/0169-4332(94)90104-X ↗
39. Influence of powder characteristics on shrinkage behavior of 3D-Printed glass structures10.1016/j.ceramint.2020.03.259 ↗
40. Effect of MoO3/WO3 modulation on high-temperature wettability and crystallization behavior of glass and its application in solar cell
41. A study of interfacial wettability of glass spreading on a silicon substrate10.1007/s11664-022-09683-8 ↗
42. Improvement of wettability of Te-modified lead-free glass frit and its effect to front side silver paste in crystalline silicon solar cells10.1016/j.solmat.2023.112214 ↗
43. The formation mechanism for printed silver-contacts for silicon solar cells10.1038/ncomms11143 ↗
44. Ohimc contact formation mechanism of silver-aluminum paste metallization on the p+ emitter of n-type crystalline silicon solar cells10.1007/s11664-022-09821-2 ↗
45. Twenty-two percent efficiency HIT solar cell10.1016/j.solmat.2008.02.037 ↗