Continuous distribution of interface states in n-type double-side poly-Si/SiOx passivating contact solar cells
Source abstract
Abstract
Advanced passivation contact in high-efficiency silicon solar cells plays an important role for the sake of minimizing recombination losses. A stack of heavily doped polycrystalline silicon ( poly-Si) and tunnel SiO x contact has attracted much attention, benefitting from its excellent characteristics of carrier selectivity and passivation, and which has been successfully applied in double-side poly-Si/SiO x passivating contact solar cells. Note that characteristics analysis of defects at tunnel SiO x/ c-Si (crystalline silicon) interface remains an issue of concern. Herein, we observe capacitance transient spectroscopy arise from both electron and hole traps in the passivating contact structure of poly-Si( p +)/tunnel SiO x/ c-Si( n). Subsequently, we propose a skillful procedure of deep-level transient spectroscopy (DLTS) measurement to confirm that the observed electron and hole traps are located at the tunnel SiO x/ c-Si interface but not in the bulk of the c -Si substrate. Finally, we show a clear physical picture of continuous energy distribution for interface states.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Surface passivation of crystalline silicon solar cells: a review10.1002/1099-159X(200009/10)8:5<473::AID-PIP337>3.0.CO;2-D ↗
2. Some key issues in the processing and fabrication of higher efficiencies silicon solar cells
3. Suppression of interface recombination by buffer layer for back contacted silicon heterojunction solar cells10.1016/j.apsusc.2014.05.110 ↗
4. Progress of hydrogenation engineering in crystalline silicon solar cells: a review10.1088/1361-6463/ac9066 ↗
5. Interface engineering of Graphene-Silicon heterojunction solar cells10.1016/j.spmi.2016.03.022 ↗
6. Development and prospects of surface passivation schemes for high-efficiency c-Si solar cells10.1016/j.solener.2018.03.025 ↗
7. A brief review of passivation materials and process for high efficiency perc solar cell10.1007/s42341-021-00366-5 ↗
8. High-efficiency silicon heterojunction solar cells: materials, devices and applications
9. Rear passivation of commercial multi-crystalline PERC solar cell by PECVD Al2O310.1016/j.apsusc.2013.10.190 ↗
10. Progress on the intrinsic a-Si:H films for interface passivation of silicon heterojunction solar cells: a review10.1016/j.jnoncrysol.2021.121166 ↗
11. Beyond 25% efficient crystalline silicon heterojunction solar cells with hydrogenated amorphous silicon oxide stacked passivation layers for rear emitter10.1016/j.solmat.2023.112429 ↗
12. Current injection-induced performance enhancement in n-type silicon heterojunction solar cells10.1002/pssr.202200112 ↗
13. Polysilicon passivating contacts for silicon solar cells: interface passivation and carrier transport mechanism10.1021/acsaem.8b02149 ↗
14. A cost roadmap for silicon heterojunction solar cells10.1016/j.solmat.2015.12.026 ↗
15. Carrier injection and annealing-enhanced electrical performance in tunnel oxide-passivated contact silicon solar cells10.1002/pssa.202100614 ↗
16. Excellent surface passivation of p-type TOPCon enabled by ozone-gas oxidation with a single-sided saturation current density of ∼ 4.5 fA/cm210.1016/j.solener.2023.05.028 ↗
17. Carrier transport through the ultrathin silicon-oxide layer in tunnel oxide passivated contact (TOPCon) c-Si solar cells10.1016/j.solmat.2018.07.025 ↗
18. Improvement of the SRH bulk lifetime upon formation of n-type POLO junctions for 25% efficient Si solar cells10.1016/j.solmat.2017.05.055 ↗
19. From PERC to tandem: POLO- and p+/n+ poly-Si tunneling junction as interface between bottom and top cell10.1109/JPHOTOV.2018.2876999 ↗
20. Tunnel oxide passivated contacts as an alternative to partial rear contacts10.1016/j.solmat.2014.06.015 ↗
21. SiO2 surface passivation layers a key technology for silicon solar cells10.1016/j.solmat.2018.04.029 ↗
22. About electrical properties of passivated SiO2/Si structures prepared electro-chemically in HClO4 solutions10.1016/j.apsusc.2012.10.053 ↗
23. Interface analysis of ultrathin SiO2 layers between c-Si substrates and phosphorus-doped poly-Si by theoretical surface potential analysis using the injection-dependent lifetime10.1002/pip.3338 ↗
24. Analysis of electrical characteristics of Au/SiO2/n-Si (MOS) capacitors using the high-low frequency capacitance and conductance methods10.1016/j.mee.2008.07.001 ↗
25. Analysis of interface states and series resistance of MIS Schottky diodes using the current-voltage (I-V) characteristics10.1016/j.mee.2007.05.043 ↗
26. Characterization of Si-Sio2 Interface states in mos capacitors by using dlts technique10.1088/0256-307X/6/12/005 ↗
27. Distinction between donor and acceptor character of surface-states in Si-SiO2 interface10.1063/1.90008 ↗
28. Asuha, Nitric acid oxidation of Si (NAOS) method for low temperature fabrication of SiO2/Si and SiO2/SiC structures10.1016/j.apsusc.2010.03.092 ↗
29. Nitric acid oxidation of Si to form ultrathin silicon dioxide layers with a low leakage current density10.1063/1.1621720 ↗
30. Ultra-thin poly-si layers: passivation quality, utilization of charge carriers generated in the poly-Si and application on screen-printed double-side contacted polycrystalline Si on oxide cells10.1002/solr.202000177 ↗
31. Schroder · 2006
32. Structural evolution of tunneling oxide passivating contact upon thermal annealing
33. Hydrogenation of interface states at a clean grain boundary in the direct silicon bonded wafer10.1002/pssa.201127536 ↗
34. Detailed study of SiOxNy:H/Si interface properties for high quality surface passivation of crystalline silicon10.1016/j.spmi.2017.07.052 ↗
35. Characterization of silicon surface states at clean and copper contaminated condition via transient capacitance measurement10.1063/1.5001117 ↗
36. A study of interface characteristics in HfAlO/p-Si by deep level transient spectroscopy10.1016/j.apsusc.2008.06.006 ↗
37. Deep-level transient spectroscopy - new method to characterize traps in semiconductors10.1063/1.1663719 ↗
38. Deep level transient spectroscopy of bulk traps and interface states in Si mos diodes10.1143/JJAP.18.113 ↗
39. Effects of oxidation conditions on electrical-properties of SiC-SiO2 interfaces10.1063/1.346873 ↗
40. Distinguishing bulk traps and interface states in deep-level transient spectroscopy10.1088/0022-3727/44/30/305303 ↗
41. Electrically active defects at AlN/Si interface studied by DLTS and ESR10.1002/pssa.201200061 ↗
42. A deep-level transient spectroscopy study of gamma-ray irradiation on the passivation properties of silicon nitride layer on silicon10.1063/1.4996992 ↗
43. A deep-level analysis of Ni-Au/AlN/(111) p+-Si metal-insulator-semiconductor capacitors10.1088/0022-3727/44/47/475104 ↗
44. Si(100)-SiO2 interface properties following rapid thermal processing10.1063/1.1343897 ↗
45. The silicon silicon-dioxide system - its microstructure and imperfections10.1088/0034-4885/57/8/002 ↗
46. Comparison of different types of interfacial oxides on hole-selective p+-poly-Si passivated contacts for high-efficiency c-Si solar cells10.1016/j.solmat.2020.110487 ↗
47. Passivation improvement of nitric acid oxide by ozone post-treatment for tunnel oxide passivated contacts silicon solar cells10.1016/j.apsusc.2019.05.369 ↗