Durability enhancement of all-solid-state electrochromic devices by adjusting the charge density ratio between electrochromic and counter electrode layers
Source abstract
Abstract
Owing to an increase in global warming, smart-window devices based on charge-balanced electrochromic devices (ECDs), which exhibit high potential to increase the thermal efficiency of buildings, have gained prominence. However, studies on the fabrication and cycling stability of charge-balanced ECDs are scarce. In this study, WO3 and NiOx films were deposited on indium–tin–oxide (ITO)-coated glass substrates by reactive direct-current magnetron sputtering, and the deposition time was varied to control the thickness and charge density of the thin films. Subsequently, the NiOx/ITO/glass and WO3/ITO/glass substrates were laminated with a Li-based polymeric electrolyte to fabricate all-solid-state ECDs comprising electrochromic (EC) and counter-electrode (CE) layers in charge-density ratios of 12.6, 6.4, 2.3, and 1.1. Changes in the electrochromic properties, device-layer microstructure, crystal structure, and elemental composition of the as-constructed ECDs before and after degradation were investigated to understand the influence of the charge-density ratio of the EC and CE layers on the long-term durability of ECDs. Increasing the charge-density ratio decreased the cycling stability of the device owing to changes in the microstructure and crystal structure of the NiOx layer in the microstructural deep-trap sites. Among all the ECDs, those comprising EC and CE layers with similar charge densities showed the most stable optical modulation and highest long-term durability. Finally, based on the aforementioned results, a degradation mechanism for charge-imbalanced all-solid-state ECDs was proposed. This study is expected to open new frontiers in designing optimal-performance electrochemical devices with a wide variety of potential applications. © 2024 ; FALSE ; scie ; scopus
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Transition Metal Oxide Nanomaterials · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Recent progress in thermochromics and electrochromics: a brief survey10.1016/j.tsf.2016.02.029 ↗
2. Active dynamic windows for buildings: a review10.1016/j.renene.2017.12.049 ↗
3. A review of conventional, advanced, and smart glazing technologies and materials for improving indoor environment10.1016/j.solmat.2016.08.026 ↗
4. The role of window glazing on daylighting and energy saving in buildings10.1016/j.rser.2014.09.020 ↗
5. Advances in chromogenic materials and devices10.1016/j.tsf.2009.08.058 ↗
6. Properties, requirements and possibilities of smart windows for dynamic daylight and solar energy control in buildings: a state-of-the-art review10.1016/j.solmat.2009.08.021 ↗
7. Smart windows: electro-, thermo-, mechano-, photochromics, and beyond
8. Electrochromic smart windows: energy efficiency and device aspects10.1007/s10008-002-0313-4 ↗
9. Electrochromic materials and devices: present and future10.1016/S0254-0584(01)00575-2 ↗
10. Electrochromic systems and the prospects for devices10.1002/1521-4095(200106)13:11<783::AID-ADMA783>3.0.CO;2-D ↗
11. VO2/WO3–based hybrid smart windows with thermochromic and electrochromic properties10.1021/acssuschemeng.9b00052 ↗
12. Flexible electrochromic and thermochromic hybrid smart window based on a highly durable ITO/graphene transparent electrode10.1016/j.cej.2021.129028 ↗
13. Progress toward durable, cost effective electrochromic window glazings10.1016/S0927-0248(98)00141-X ↗
14. Electrochromic materials and devices for energy efficiency and human comfort in buildings: a critical review10.1016/j.electacta.2017.11.169 ↗
15. Gel electrolyte for solid-state electrochromic cell10.1149/1.2069512 ↗
16. All-inorganic solid-state electrochromic devices: a review10.1007/s10008-016-3408-z ↗
17. Characterization of Ni-W oxide thin film electrodes10.1016/S0167-2738(98)00093-9 ↗
18. Improved cyclability by tungsten addition in electrochromic NiO thin films10.1016/j.solmat.2005.01.018 ↗
19. Electrochromic properties of LixNiyO films deposited by RF magnetron sputtering10.1149/1.3141704 ↗
20. Electrochromism in nickel oxide films containing Mg, Al, Si, V, Zr, Nb, Ag, or Ta10.1016/j.solmat.2003.11.032 ↗
21. Enhanced electrochromic performance on anodic nickel oxide inorganic device via lithium and aluminum co-doping10.1016/j.jallcom.2019.153365 ↗
22. Improved electrochromic performance of NiO-based thin films by lithium and tantalum co-doping10.1016/j.jallcom.2018.02.232 ↗
23. Improved electrochromic performance in nickel oxide thin film by Zn doping10.20964/2020.05.28 ↗
24. Enhanced electrochromic performances and cycle stability of NiO-based thin films via Li-Ti co-doping prepared by sol-gel method10.1016/j.electacta.2015.10.154 ↗
25. Electrochromic performance of nanocomposite nickel oxide counter electrodes containing lithium and zirconium10.1016/j.solmat.2013.11.023 ↗
26. Hole doping in Al-Containing nickel oxide materials to improve electrochromic performance10.1021/am302097b ↗
27. Hierarchical molecularly imprinted inverse opal-based platforms for highly selective and sensitive determination of histamine10.1021/acsapm.2c00072 ↗
28. Nanostructured material-based optical and electrochemical detection of amoxicillin antibiotic10.1002/bio.4408 ↗
29. Electrochromic properties of NiOx:H films deposited by DC magnetron sputtering for ITO/NiOx:H/ZrO2/WO3/ITO device10.1016/j.apsusc.2015.09.056 ↗
30. Enhanced electrochromism in short wavelengths for NiO:(Li, Mg) films in full inorganic device ITO/NiO:(Li, Mg)/Ta2O5/WO3/ITO10.1016/j.electacta.2018.01.049 ↗
31. Properties of NiOx and its influence upon all-thin-film ITO/NiOx/LiTaO3/WO3/ITO electrochromic devices prepared by magnetron sputtering10.1016/j.vacuum.2014.09.007 ↗
32. Durability-enhanced monolithic inorganic electrochromic devices with tantalum-doped nickel oxide as a counter electrode10.1016/j.solmat.2021.111435 ↗
33. All inorganic thin film electrochromic device using LiPON as the ion conductor10.1016/j.solmat.2015.06.052 ↗
34. The influence of charge capacity ratio on the performance of a complementary electrochromic system10.1016/S0927-0248(98)00137-8 ↗
35. Charge balancing and optical contrast optimization in Fe-MEPE/Ni1-xO electrochromic devices containing a Li reference electrode10.1016/j.solmat.2021.111080 ↗
36. Enhanced stability of electrochromic devices based on Prussian blue by tuning electrolyte ions and charge/discharge balance10.1007/s10800-022-01747-1 ↗
37. Structures and electrochromic properties of tungsten oxide films prepared by magnetron sputtering10.1016/j.apsusc.2005.03.170 ↗
38. Optical and electrochromic properties of oxygen sputtered tungsten oxide (WO3) thin films10.1016/j.solmat.2006.09.005 ↗
39. Thickness dependence of WO3 and NiOx thin film in all-solid-state complementary electrochromic devices10.1002/ente.202100656 ↗
40. Electrochromic properties of WO3 thin films: the role of film thickness10.1002/ansa.202000072 ↗
41. Investigation of all-solid-state electrochromic devices with durability enhanced tungsten-doped nickel oxide as a counter electrode10.1016/j.jallcom.2019.152399 ↗
42. Thickness dependence of electrical and optical properties of sputtered nickel oxide films10.1016/j.tsf.2005.07.124 ↗
43. Electrochromic behavior of NiO film prepared by e-beam evaporation
44. Galvanostatic ion detrapping rejuvenates oxide thin films10.1021/acsami.5b09430 ↗
45. Electrochemical rejuvenation of anodically coloring electrochromic nickel oxide thin films10.1021/acsami.7b13815 ↗
46. Electrical properties of Li-doped NiO films10.1016/j.jeurceramsoc.2009.05.041 ↗
47. In situ electrochromic efficiency of a nickel oxide thin film: origin of electrochemical process and electrochromic degradation10.1039/C7TC04696K ↗
48. Anodic electrochromism for energy-efficient windows: cation/anion-based surface processes and effects of crystal facets in nickel oxide thin films10.1002/adfm.201500676 ↗
49. Structure and electronic properties of electrochromic NiO films10.1149/1.2056205 ↗
50. Nickel vacancy behavior in the electrical conductance of nonstoichiometric nickel oxide film
51. New interpretations of XPS spectra of nickel metal and oxides10.1016/j.susc.2006.01.041 ↗
52. Lithium trapping as degradation mechanism of electrochromic properties of all-solid-state WO3/NiO device10.1039/C8TC01372A ↗
53. Charge-transfer kinetics and cyclic properties of inorganic all-solid-state electrochromic device with remarkably improved optical memory10.1016/j.solmat.2017.09.012 ↗
54. Dynamic behaviors of inorganic all-solid-state electrochromic device: role of potential10.1016/j.electacta.2018.02.050 ↗
55. Thickness dependent surface roughness of sputtered Li2.5TaOx ion conductor and its effect on electro-optical performance of inorganic monolithic electrochromic device10.1016/j.solmat.2017.12.027 ↗