journal article·2024-06

Finite element model of femtosecond laser scribing on silicon heterojunction solar cells

Yunkai Duan, Weihong Xu, Xiaoliang He, Zhilong Jiang, Hongyan Lu, Song Zhang, Cheng Liu, Shouyu Wang, Yan Kong

Publisher page

Abstract

A method to increase the module efficiency, is the separation of silicon solar cells prior to interconnection. The lower currents per cell lead to lower string currents and less resistive losses. This is also the case in silicon heterojunction (SHJ) cell and module technology. One of the methods to separate is by laser scribing and mechanical cleaving (LSMC). It was known that not mechanical cleaving but laser scribing is a major source of losses during the solar cell separation process. Therefore, the SHJ solar cell separation optimization should focus on the laser scribing process to pursue better performance. Most reported works employed experiments to study the laser scribing influence on solar cell performance, but unfortunately, they suffer from expensive devices, complicated operations, and accuracy uncertainty. To our knowledge, we first designed a finite element model of femtosecond laser scribing on the SHJ solar cells. This numerical model has been proven by experiments and shows its function in numerically evaluating the solar cell performance during laser scribing. Based on the model, we analyze the reasons for the effect of femtosecond laser scribing on the performance of solar cell and explain the phenomenon of a significant reduction in short-circuit current density ( J sc). Therefore, our numerical femtosecond laser scribing model can be a useful guide for SHJ solar cell separation.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Photovoltaic System Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Silicon heterojunction solar cells with up to 26.81% efficiency achieved by electrically optimized nanocrystalline-silicon hole contact layers10.1038/s41560-023-01255-2 ↗
2. A laser texturing study on multi-crystalline silicon solar cells10.1016/j.solmat.2020.110587 ↗
3. Femtosecond laser ablation of dielectric layers for high-efficiency silicon wafer solar cells10.1016/j.solener.2018.02.046 ↗
4. Toward commercialization of efficient and stable perovskite solar modules10.1002/solr.202100600 ↗
5. Flip-chip packaged perovskite solar cells10.1002/ente.202001129 ↗
6. The fabrication and characteristic investigation of microstructured silicon with different spike heights10.1016/j.optcom.2014.08.034 ↗
7. Post-separation processing for silicon heterojunction half solar cells with passivated edges10.1109/JPHOTOV.2021.3099732 ↗
8. Comparison of half-cell and full-cell module hotspot-induced temperature by simulation10.1109/JPHOTOV.2018.2817692 ↗
9. Optimized size and tab width in partial solar cell modules including shingled designs10.1155/2017/3609109 ↗
10. A quantitative comparison between double glass photovoltaic modules using half-size cells and quarter-size cells10.1109/JPHOTOV.2017.2730358 ↗
11. Solar cell demand for bifacial and singulated-cell module architectures
12. Postmetallization "passivated edge technology" for separated silicon solar cells10.1109/JPHOTOV.2019.2959946 ↗
13. Modeling of edge losses in Al-bsf silicon solar cells10.1109/JPHOTOV.2016.2618603 ↗
14. Root cause analysis of solar cell cracks at shingle joints10.1016/j.solmat.2022.111590 ↗
15. Bifacial shingle solar cells on p-type Cz-Si (pSPEER)10.1063/1.5049311 ↗
16. Characterization of the laser scribing process of HIT cells for a photovoltaic shingled module10.3938/jkps.77.971 ↗
17. Reliability study on the half-cutting PERC solar cell and module10.1016/j.egyr.2023.07.023 ↗
18. Influence of laser cutting conditions on electrical characteristics of half-size bifacial silicon solar cells10.1016/j.mssp.2019.104747 ↗
19. Extracting metal and edge recombination parameters which are compatible with multi-dimensional cell simulations
20. Edge recombination analysis of silicon solar cells using photoluminescence measurements10.1063/1.5123822 ↗
21. A novel laser scribing method combined with the thermal stress cleaving for the crystalline silicon solar cell separation in mass production10.1016/j.solmat.2022.111714 ↗
22. Thermal laser separation of PERC and SHJ solar cells10.1109/JPHOTOV.2020.3041251 ↗
23. Computational and experimental study of nanosecond laser ablation of crystalline silicon10.1016/j.icheatmasstransfer.2011.05.010 ↗
24. Laser scribing of fluorine-doped tin oxide coated on glass substrate in air and water10.1016/j.optlastec.2022.108280 ↗
25. TOPCon shingle solar cells: thermal laser separation and passivated edge technology10.1002/pip.3680 ↗
26. Simulation and study of the influence of the buffer intrinsic layer, back-surface field, densities of interface defects, resistivity of p-type silicon substrate and transparent conductive oxide on heterojunction with intrinsic thin-layer (HIT) solar cell10.1016/j.solener.2010.01.029 ↗
27. Analysis and optimization approach for the doped amorphous layers of silicon heterojunction solar cells10.1063/1.3650255 ↗
28. Physical aspects of a-Si:H/c-Si hetero-junction solar cells10.1016/j.tsf.2006.11.087 ↗
29. Band gap optimization of p-i-n layers of a-Si:H by computer aided simulation for development of efficient solar cell10.1016/j.solener.2012.02.007 ↗
30. Investigation of selective junctions using a newly developed tunnel current model for solar cell applications10.1016/j.solmat.2015.05.014 ↗
31. Simulation of high-efficiency crystalline silicon solar cells with homo-hetero junctions10.1109/TED.2013.2259830 ↗
32. Electrical characterization of n-amorphous/p-crystalline silicon heterojunctions10.1063/1.362526 ↗
33. Analysis of edge losses on silicon heterojunction half solar cells10.1016/j.solmat.2019.110213 ↗
34. Influence of laser condition on the electrical and mechanical performance of bifacial half-cutting PERC solar cell and module10.1002/er.8229 ↗
35. Analysis of nanosecond and femtosecond laser ablation of rear dielectrics of silicon wafer solar cells10.1016/j.solmat.2018.12.002 ↗
36. Influence of laser condition on the electrical and mechanical performance of bifacial half-cutting PERC solar cell and module10.1002/er.8229 ↗
37. Analysis of different laser cutting conditions on electrical characteristics of half-cut HJT solar cells10.1007/s40042-023-00910-x ↗