journal article·2025-08

Screen printed Ag-doped nickel metallization for industrial n-TOPCon silicon solar cells

Veysel Unsur, Melisa Korkmaz Arslan, Esma Alloji, Berkeli Akgayev, Halil Tokgoz, Rasit Turan, Serdar Akbayrak

Publisher page

Abstract

This study introduces an innovative Ag-doped Ni metallization technique for TOPCon silicon solar cells, offering a cost-effective alternative to traditional silver-based contacts. Employing nickel paste doped with only 4 % silver a conversion efficiency of 23.66 % was achieved compared to silver-contacted counterparts, with an efficiency of 23.71 %. The custom-engineered glass frit used in the Ag-Ni metal paste, acting as a hole-selective layer after firing, enhanced the performance of the solar cells by improving carrier transfer and reducing contact resistance to 0.98 mΩ cm2. Significantly, this method reduced silver usage to less than 0.5 mg/Wp, leading to a dramatic decrease in metallization costs in which conventional screen-printed metallization typically requires 13–20 mg/Wp of silver. Additionally, the Levelized Cost of Electricity (LCOE) was substantially lowered, demonstrating the economic viability of this approach for large-scale solar energy production. These findings underscore the potential of Ag-doped Ni contacts in addressing the scalability and sustainability challenges of solar cell manufacturing.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Itrpv 2023
2. Metal-insulator-semiconductor silicon solar cells10.1016/0379-6787(83)90037-6 ↗
3. High efficiency PERC and PERL silicon solar cells
4. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
5. Carrier‐selective contacts using metal compounds for crystalline silicon solar cells10.1002/pip.3552 ↗
6. n-Type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
7. Efficient silicon solar cells with dopant-free asymmetric heterocontacts10.1038/nenergy.2015.31 ↗
8. Efficient carrier-selective p- and n-contacts for Si solar cells10.1016/j.solmat.2014.05.039 ↗
9. Schubert · 2006
10. The silver learning curve for photovoltaics and projected silver demand for net-zero emissions by 205010.1002/pip.3661 ↗
11. Baker · 2024 · 34th
12. Intrinsic diffusion coefficient of interstitial copper in silicon10.1103/PhysRevLett.81.1243 ↗
13. Nickel-plated front contacts for front and rear emitter silicon solar cells10.1016/j.egypro.2013.07.303 ↗
14. Review of the potential of the Ni/Cu plating technique for crystalline silicon solar cells10.3390/ma7021318 ↗
15. Novel silver and copper pastes for n-type bi-facial PERT cell
16. Novel low-temperature-sintering type Cu-alloy pastes for silicon solar cells10.1016/j.egypro.2012.05.009 ↗
17. Non-contacting busbars for advanced cell structures using low temperature copper paste10.1016/j.egypro.2015.03.293 ↗
18. Screen printable copper pastes for silicon solar cells10.1016/j.solmat.2023.112633 ↗
19. Screen printable fire through nickel contacts for silicon solar cells10.1016/j.solmat.2023.112528 ↗
20. Rethinking electrochemical deposition of nickel oxide for photovoltaic applications10.1002/solr.202300750 ↗
21. Batchu · 2015
22. Rapid thermal processing of cost‐effective contacts for silicon solar cells10.1002/pip.3119 ↗
23. Effect of silver powder microstructure on the performance of silver powder and front-side solar silver paste10.3390/ma17020445 ↗
24. Origin of screen-printed metal contact losses in crystalline silicon solar cells10.1021/acsaem.3c02143 ↗
25. The formation mechanism for printed silver-contacts for silicon solar cells10.1038/ncomms11143 ↗
26. Efficient silicon solar cells with dopant-free asymmetric heterocontacts10.1038/nenergy.2015.31 ↗
27. n-Type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
28. Simultaneous improvement of photovoltaic performance and stability by in situ formation of 2D perovskite at (FAPbI3)0.88(CsPbBr3)0.12/CuSCN interface10.1002/aenm.201702714 ↗
29. Recombination in highly injected silicon10.1109/T-ED.1987.23095 ↗
30. Tantalum oxide electron-selective heterocontacts for silicon photovoltaics and photoelectrochemical water reduction10.1021/acsenergylett.7b01153 ↗
31. Tantalum nitride electron-selective contact for crystalline silicon solar cells10.1002/aenm.201800608 ↗
32. R. Dharmadasa et al., "High temperature copper metallization: demand, hurdles and reliability," 2024 IEEE 52nd Photovoltaic Specialist Conference (PVSC), 10.1109/PVSC57443.2024.10749130.10.1109/PVSC57443.2024.10749130 ↗
33. Screen printable copper pastes for silicon solar cells10.1016/j.solmat.2023.112633 ↗
34. Mechanism of silver/glass interaction in the metallization of crystalline silicon solar cells10.1088/2053-1591/ab6ca2 ↗
35. Study on the sintering and contact formation process of silver front side metallization pastes for crystalline silicon solar cells10.1016/j.apsusc.2016.03.089 ↗
36. Implementation of nickel and copper as cost-effective alternative contacts in silicon solar cells10.1002/pip.3792 ↗
37. Design considerations for multi-terawatt scale manufacturing of existing and future photovoltaic technologies: challenges and opportunities related to silver, indium and bismuth consumption10.1039/D1EE01814K ↗
38. Ray · 2023 · 21