journal article·2025-04

Corrosion resistance improvement of transparent conductive oxide films to the acidic etching during the electroplating preparation of copper electrodes on silicon heterojunction solar cells

Xiaotong Li, Xiaojie Jia, Lei Zhao, Xiaohua Xu, Lilan Wen, Shiyu Qu, Changtao Peng, Ke Xin, Jihong Xiao, Su Zhou, Liang Zhang, Yuhua Zuo, Wenjing Wang

Publisher page

Abstract

Replacing silver with copper for the electrodes is a potential path to reduce the cost of silicon heterojunction (SHJ) solar cells. During the usually used electroplating process for the copper electrode preparation, an acidic etching solution is required for the removal of the excessive copper seed layer on the transparent conductive oxide (TCO) layers after the plating completion. Thus, it becomes necessary to reduce the impact of the acidic etching solution on the TCO films. Here, the resistance to the acidic etching of different In 2O 3-based TCO films with different doping concentration were compared. The results showed that highly Sn doped In 2O 3-based TCO (ITO) film exhibited better resistance to the acidic etching. Additionally, it was found that annealing treatment before the electroplating can increase the crystallinity of ITO, enhancing its resistance to the acidic corrosion, and thereby improving the conversion efficiency of SHJ solar cells. Comparing to the solar cell with the as-deposited ITO films, the annealing treated solar cell could obtain a relative conversion efficiency increase of 1.33 %.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Photovoltaic System Optimization Techniques · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Power conversion efficiency of 25.26% for silicon heterojunction solar cell with transition metal element doped indium oxide transparent conductive film as front electrode10.1002/pip.3565 ↗
2. High-efficiency silicon heterojunction solar cells: materials, devices and applications10.1016/j.mser.2020.100579 ↗
3. Silicon heterojunction solar cells achieving 26.6% efficiency on commercial-size p-type silicon wafer10.1016/j.joule.2024.01.015 ↗
4. Silicon heterojunction solar cells with up to 26.81% efficiency achieved by electrically optimized nanocrystalline-silicon hole contact layers10.1038/s41560-023-01255-2 ↗
5. High-performance hetero-junction crystalline silicon photovoltaic technology
6. Tungsten doped indium oxide film: ready for bifacial copper metallization of silicon heterojunction solar cell10.1016/j.solmat.2015.09.033 ↗
7. Patterning and formation of copper electroplated contact for bifacial silicon hetero-junction solar cell10.1016/j.solener.2017.02.022 ↗
8. Influence of unintentional H2O introduction in sputtering chamber on ITO films and HJT solar cells10.1016/j.solmat.2023.112274 ↗
9. Effect of annealing treatment on properties of Ce-doped indium oxide (ICO) transparent conductive oxide films10.1007/s10854-023-10269-1 ↗
10. Reliability of transparent conductive oxide in ambient acid and implications for silicon solar cells10.1016/j.esci.2024.100241 ↗
11. RF magnetron sputtered ZnO:Al thin films on glass substrates: a study of damp heat stability on their optical and electrical properties10.1016/j.solmat.2007.07.008 ↗
12. Improved moisture stability of thin Ga-doped ZnO films by indium codoping10.1016/j.apsusc.2018.06.281 ↗
13. Stability of sputtered ITO thin films to the damp-heat test10.1016/j.surfcoat.2005.11.114 ↗
14. Highly crystallized tungsten doped indium oxide film stabilizes silicon heterojunction solar cells in sodium environment10.1016/j.solmat.2021.111387 ↗
15. Superior optoelectrical properties of magnetron sputter-deposited cerium-doped indium oxide thin films for solar cell applications10.1016/j.ceramint.2020.09.006 ↗
16. Effects of doping ratio and thickness of indium tin oxide thin films prepared by magnetron sputtering at room temperature10.3390/coatings13122016 ↗
17. Oxidative precipitation of cerium in acidic chloride solutions: Part II – oxidation in a mixed REE system10.1016/j.hydromet.2020.105331 ↗
18. Microstructure evolution of room-temperature-sputtered ITO films suitable for silicon heterojunction solar cells10.1016/j.cap.2020.06.007 ↗
19. High-mobility hydrogen-doped In2O3 transparent conductive oxide for a-Si:H/c-Si heterojunction solar cells10.1016/j.solmat.2008.09.047 ↗
20. Characterization of indium−tin oxide interfaces using X-ray photoelectron spectroscopy and redox processes of a chemisorbed probe molecule: effect of surface pretreatment conditions10.1021/la011101t ↗
21. The key of ITO films with high transparency and conductivity: grain size and surface chemical composition10.1016/j.jallcom.2021.162304 ↗
22. Improved thermal stability of ZnO transparent conducting films with a ZnO overlayer10.1016/j.tsf.2011.01.211 ↗
23. Investigation of In2O3:SnO2 films with different doping ratio and application as transparent conducting electrode in silicon heterojunction solar cell10.1016/j.solmat.2021.111404 ↗
24. Influence of oxygen in the deposition and annealing atmosphere on the characteristics of ITO thin films prepared by sputtering at room temperature10.1016/j.vacuum.2005.10.006 ↗
25. The effect of post annealing temperature on grain size of indium-tin-oxide for optical and electrical properties improvement10.1016/j.rinp.2019.102159 ↗
26. Hydrogen-doped indium oxide/indium tin oxide bilayers for high-efficiency silicon heterojunction solar cells10.1016/j.solmat.2013.03.024 ↗
27. Humid environment stability of low pressure chemical vapor deposited boron doped zinc oxide used as transparent electrodes in thin film silicon solar cells10.1016/j.tsf.2011.06.095 ↗