A comparative experimental study on front and back laser cutting technology for mass separation of N-TOPCon crystal silicon solar cells
Source abstract
Abstract
Generally, the Thermal Laser Separation (TLS) technology is used to pre-groove from the back of the cell, which is the first process of half-cell module preparation. However, this benchmark practice may result in forming new leakage points in the grooves at both ends of the cell. Hence, we investigate the mechanism behind the formation of leakage points after grooving and the impact on N-TOPCon`s cell efficiency and module power. It is discovered that the diffusion of P element is the main reason for the increase in the proportion of leakage points. The front cutting is accordingly proposed to alleviate problem. A comprehensive experimental study on its feasibility has been conducted. It has been confirmed that the leakage current under the reverse bias voltage is smaller, the data convergence is better, and the breakdown performance is more stable for N-TOPCon. Furthermore, the module power is higher.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Advanced Surface Polishing Techniques · Laser Material Processing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. A quantitative analysis of photovoltaic modules using halved cells10.1155/2013/739374 ↗
2. A quantitative comparison between double glass photovoltaic modules using half-size cells and quarter-size cells10.1109/JPHOTOV.2017.2730358 ↗
3. Weak light performance and annual yields of PV modules and systems as a result of the basic parameter set of industrial solar cells
4. Loss analysis of a 24.4%-efficient front-junction silicon heterojunction solar cell and opportunity for localized contacts10.1109/JPHOTOV.2023.3291050 ↗
5. Advances in thermal laser separation: process monitoring in a kerf-free laser-based cutting technology to ensure high yield10.1016/j.procir.2018.08.056 ↗
6. Fabrication of monolithic silicon heterojunction solar cells
7. A review of laser ablation and dicing of Si wafers10.1016/j.precisioneng.2021.10.001 ↗
8. High quality half-cell processing using thermal laser separation10.1016/j.egypro.2015.07.048 ↗
9. Study of manufacturing and hotspot formation in cut cell and full cell PV modules10.1016/j.solener.2020.04.052 ↗
10. A novel laser scribing method combined with the thermal stress cleaving for the crystalline silicon solar cell separation in mass production10.1016/j.solmat.2022.111714 ↗
11. Loss analysis for laser separated solar cells10.1016/j.egypro.2014.08.094 ↗
12. Thermal laser separation – a novel dicing technology fulfilling the demands of volume manufacturing of 4H-SiC devices10.4028/www.scientific.net/MSF.821-823.528 ↗
13. Thermal laser separation of PERC and SHJ solar cells10.1109/JPHOTOV.2020.3041251 ↗
14. Silicon Heterojunction and Half-Cell configuration: optimization path for increased module power
15. Stable passivation of cut edges in encapsulated n-type silicon solar cells using Nafion polymer10.1016/j.solmat.2023.112401 ↗
16. Influence of laser condition on the electrical and mechanical performance of bifacial half‐cutting PERC solar cell and module10.1002/er.8229 ↗
17. Mechanical damage of half-cell cutting technologies in solar cells and module laminates
18. Development of passivating edge shingle modules with right cut, new loss evaluation and liquid-based edge passivation strategy10.1016/j.solmat.2023.112513 ↗
19. Reliability study on the half-cutting PERC solar cell and module10.1016/j.egyr.2023.07.023 ↗
20. Mitigating cut losses in interdigitated back contact solar cells10.1109/JPHOTOV.2022.3208507 ↗
21. Thermal laser separation and high-throughput layer deposition for edge passivation for TOPCon shingle solar cells10.1016/j.solmat.2023.112419 ↗
22. TOPCon shingle solar cells: thermal laser separation and passivated edge technology10.1002/pip.3680 ↗
23. Analysis of edge losses on silicon heterojunction half solar cells10.1016/j.solmat.2019.110213 ↗
24. Analysis of edge recombination for high-efficiency solar cells at low illumination densities
25. Edge isolation of solar cells using laser doping10.1016/j.solmat.2014.10.002 ↗
26. Fell · 2017 · vol. 2017 · 853
27. New contact frame design for minimizing losses due to edge recombination and grid-induced shading10.1016/S0927-0248(02)00184-8 ↗
28. Low temperature Post-process repassivation for heterojunction cut-cells
29. A definition rule for defect classification and grading of solar cells photoluminescence feature images and estimation of CNN-based automatic defect detection method10.3390/cryst13050819 ↗
30. Investigation of edge recombination effects in silicon solar cell structures using photoluminescence10.1063/1.2186510 ↗
31. Depth-prediction method for direct laser-scribing processes10.1016/j.apsusc.2017.04.140 ↗
32. Deep junction laser doping for contacting buried layers in silicon solar cells10.1016/j.solmat.2013.02.011 ↗