journal article·2024-03

Study on physical property regulation and high-temperature heat storage properties of Al–Si composite phase change materials prepared by one-step pressing

Jinjie Mo, Ziye Ling, Zhengguo Zhang, Xiaoming Fang

Publisher page

Abstract

In this paper, we investigate a metal composite prepared using a one-step pressing method, where Al–Si alloy acts as the phase change materials (PCMs) and Al 2O 3 /AlN serve as the structural support materials. The alloy formation and PCM composite preparation are synthesized in a single step. The study aims to characterize the microstructure, thermodynamic, and thermal properties of the composite material. To assess the heat storage properties of the prepared composite PCMs at temperatures higher than 600 °C, a high-temperature test system is established using a high-frequency induction heater. Additionally, we explore how to improve the issue of liquid leakage under high-temperature conditions. The results demonstrate that Al 2O 3 and AlN (ceramic materials) exhibit excellent chemical compatibility with Al–Si composite PCMs. After sintering, the ceramic materials form a strong bond with Al–Si, effectively retaining the liquid phase of Al–Si alloy within the composite material. Consequently, the Al–Si composite PCMs do not exhibit high-temperature liquid leakage under elevated conditions. Both Al 2O 3 /Al–Si and AlN/Al–Si composites possess favorable high temperature heat storage properties. The phase change enthalpy of Al 2O 3 /Al–Si composite reaches 400 kJ/kg, with a thermal conductivity of 36 W/(m·K). Similarly, the AlN/Al–Si composite achieves a phase change enthalpy of 404 kJ/kg and a thermal conductivity of 43 W/(m·K). Both composites fulfill the requirements for high-temperature heat storage applications.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Thermal properties of materials · Heat Transfer and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. The role of solar energy usage in environmental sustainability: fresh evidence through time-frequency analyses10.1016/j.renene.2023.02.063 ↗
2. Progress in research and technological advancements of thermal energy storage systems for concentrated solar power10.1016/j.est.2022.105860 ↗
3. Coordinated control of concentrated solar power systems with indirect molten salt storage considering operation mode switching: using switching model predictive control10.1016/j.energy.2023.126686 ↗
4. Molten salt for advanced energy applications: a review10.1016/j.anucene.2021.108924 ↗
5. Molten chloride salts for next generation concentrated solar power plants: mitigation strategies against corrosion of structural materials10.1016/j.solmat.2018.12.020 ↗
6. Molten salt power towers operating at 600–650 °C: salt selection and cost benefits10.1016/j.solener.2018.01.063 ↗
7. A review of metallic materials for latent heat thermal energy storage: thermophysical properties, applications, and challenges10.1016/j.rser.2021.111812 ↗
8. C. Sol Carolina, K. Murat, A Review of Metallic Materials for Latent Heat Thermal Energy Storage: Thermophysical Properties, Applications, and Challenges, Renew. Sust. Energ. Rev. 154(2022) 111812.10.1016/j.rser.2021.111812 ↗
9. Experimental research on a kind of novel high temperature phase change storage heater10.1016/j.enconman.2005.12.004 ↗
10. Microstructure and heat storage properties of Al-Si high temperature phase change heat storage materials
11. Thermal reliability of Al-Si eutectic alloy for thermal energy storage10.1016/j.materresbull.2017.07.040 ↗
12. Degradation mechanism of cyclic heat storage properties of Al-Si @Al2O3 microcapsules10.1016/j.ceramint.2022.12.239 ↗
13. Novel core/void/shell composite PCMs for high temperature thermal energy storage10.1016/j.cej.2019.123539 ↗
14. Fabrication and thermal properties investigation of aluminium based composite PCMs for medium and high temperature thermal energy storage10.1016/j.solmat.2020.110511 ↗
15. Jiao · 2012
16. Composite materials for thermal energy storage: enhancing performance through microstructures10.1002/cssc.201300878 ↗
17. Carbonate salt based composite PCMs for medium and high temperature thermal energy storage: a microstructural study10.1016/j.solmat.2019.03.035 ↗
18. Wettability of SiC by aluminium and Al-Si alloys10.1007/BF01160579 ↗
19. Reactive wetting of ceramics by liquid metals10.2320/matertrans1989.33.400 ↗
20. Thorvald Engh, Merete Tangstad, Wetting ofpure aluminium on graphite, SiC and Al2O3 in aluminium filtration10.1016/S1003-6326(11)61410-6 ↗
21. Enhancement of structure and properties of Sn58Bi solder by AlN ceramic particles10.1016/j.jmrt.2022.06.001 ↗
22. Studies on the Al2OC mesophase in synthesized AlN powder and its effects on properties of AlN ceramic substrates10.1016/j.ceramint.2020.05.195 ↗
23. Microcharacterization and mechanical performance of an Al-50Si alloy prepared using the sub-rapid solidification technique10.1016/j.matlet.2019.127287 ↗
24. Wetting of pure aluminium on graphite, SiC and Al2O3 in aluminium filtration10.1016/S1003-6326(11)61410-6 ↗
25. Effects of remelting on variations in composition, microstructure, and hardness property of binary Al-Si alloys
26. Grain refining of Al-Si alloys using Al-10% Ti master alloy: role of Zr addition10.1080/13640461.2018.1518662 ↗
27. Effect of phase change medium composition on heat storage performance of fly ash based high temperature shaped composite PCMs
28. Synthesis of three-dimensional graphene aerogel encapsulated n-octadecane for enhancing phase-change behavior and thermal conductivity10.1039/C7TA03432F ↗
29. J. Patrick, Shambergera, M. Nickolaus, et al., Review of metallic phase change materials for high heat flux transient thermal management application, Appl. Energy, 258 (2022) 113955.10.1016/j.apenergy.2019.113955 ↗
30. Sun · 2021
31. J. Hu, R. Wang, C. Wang, et al., X Ray Diffraction Model of Crystal and General Derivation of Bragg Equation, Phys. Rev. B 34 (2015) 1-2.
32. The thermal properties of tungsten at high temperature
33. First-principles investigations of the pressure-induced phase transformations and properties of crystalline and amorphous AlN10.1103/PhysRevMaterials.4.113605 ↗