journal article·2025-07Open access

Investigation of coal gangue-based low-carbon phase-change composites for thermal energy storage

Yaxuan Xiong, Meichao Yin, Yuting Wu, Aitonglu Zhang, Jiancheng Wang, Jing Ren, Cancan Zhang, Xiaohui She, Yanan Su, Yanqi Zhao, Meng Li, Yulong Ding

Abstract

Low-carbon phase change composites with low cost determines their potential in massive engineering applications . To decrease the cost and carbon emission of phase change composites during the production this work innovatively employs coal gangue as raw material for skeletal material production and NaNO 3 as phase change material to prepare phase change composites. Nine shape-stable phase change composites with diverse mass fractions of skeletal material and phase change material were fabricated through a cold compression-hot sintering method. An investigation was conducted into the crucial properties of the coal gangue-based shape-stable phase change composites, encompassing thermal storage capacity, microstructure, mechanical robustness, chemical compatibility, and economic feasibility . The findings revealed that a mass ratio of coal gangue to NaNO 3 at 4.5:5.5 (sample SC3) resulted in an optimization of various properties. Specifically, sample SC3 exhibited a mechanical strength of 49.33 MPa and an impressive thermal storage capacity of 399.29 J/g within a temperature range of 100 °C–335 °C, accompanied by a thermal conductivity of 1.484 W/(m⋅K). Notably, sample SC3 maintained excellent thermal storage performance, mechanical strength , and good appearance after enduring 1858 heating and cooling cycles. Furthermore, sample SC3 demonstrated favorable chemical compatibility between components evenly dispersed throughout the sample.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Radiative Heat Transfer Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Effect of carbon capture on carbide slag-steel slag shape-stable phase change materials for thermal energy storage10.1016/j.renene.2024.121251 ↗
2. Agency IE. CO2 Emissions in 2023. https://www.iea.org/reports/co2-emissions-in-2023. March 2024.
3. Low temperature heat storage with phase change materials10.1080/01430750.1980.9675731 ↗
4. Realistic utilization of emerging thermal energy recovery and storage technologies for buildings
5. Biobased phase change materials in energy storage and thermal management technologies10.1016/j.rser.2023.113546 ↗
6. Polyethylene glycol/carbon black shape-stable phase change composites for peak load regulating of electric power system and corresponding thermal energy storage
7. Experimental assessment of low temperature phase change materials (PCM) for refrigerating and air conditioning applications10.1016/j.ijrefrig.2023.07.016 ↗
8. Comparative review of different influence factors on molten salt corrosion characteristics for thermal energy storage10.1016/j.solmat.2021.111485 ↗
9. An update review of molecular dynamic study on thermal physical properties of molten salt
10. Comparative investigation on dynamic hot corrosion behavior of 347H in quaternary molten salt and its nanofluids10.1016/j.solmat.2024.113263 ↗
11. Effect of Na2CO3 content on thermophysical properties, corrosion behaviors of KNO3-NaNO2 molten salt10.1016/j.energy.2024.133378 ↗
12. Fabrication and thermal properties of CaCl2·6H2O–CO(NH2)2/SiO2 as room-temperature shape-stable composite PCM for building thermal insulation
13. Experimental investigation of improved thermal characteristics of SiO2/myristic acid nanofluid as phase change material (PCM)10.1016/j.matpr.2019.02.169 ↗
14. Experimental evaluation of fire resistance performance of cement mortar with PCM/Mg(OH)2-based composite fine aggregate10.1016/j.conbuildmat.2021.123018 ↗
15. A novel low-temperature fabrication approach of composite phase change materials for high temperature thermal energy storage10.1016/j.apenergy.2018.12.072 ↗
16. Optimal preparation of PCM/diatomite composites for enhancing thermal properties10.1016/j.ijheatmasstransfer.2013.03.043 ↗
17. Preparation, characterization and thermal properties of binary nitrate salts/expanded graphite as composite phase change material10.1016/j.tca.2014.04.021 ↗
18. Performance assessment of capric acid-ethyl alcohol/expanded vermiculite phase change material incorporated cement mortar for thermal insulation in buildings10.1016/j.est.2023.108550 ↗
19. Preparation and thermophysical properties of three-dimensional attapulgite based composite phase change materials10.1016/j.est.2020.101847 ↗
20. A review on thermal energy storage with phase change materials enhanced by metal foams
21. Composites with a novel core–shell structural expanded perlite/polyethylene glycol composite PCM as novel green energy storage composites for building energy conservation10.1016/j.apenergy.2022.120363 ↗
22. Ca(NO3)2-NaNO3/expanded graphite composite as a novel shape-stable phase change material for mid- to high-temperature thermal energy storage10.1016/j.enconman.2018.02.057 ↗
23. Synthesis and characterization of polyethylene glycol/modified attapulgite form-stable composite phase change material for thermal energy storage10.1016/j.solener.2020.05.064 ↗
24. Preparation and characterization of high temperature shape stable NaNO3/diatomite phase change materials with nanoparticles for solar energy storage applications10.1016/j.est.2021.103735 ↗
25. A review on microencapsulation, thermal energy storage applications, thermal conductivity and modification of polymeric phase change material for thermal energy storage applications10.1007/s00289-022-04369-x ↗
26. Recent developments in solid-solid phase change materials for thermal energy storage applications10.1016/j.est.2024.111570 ↗
27. Red mud-molten salt composites for medium-high temperature thermal energy storage and waste heat recovery applications10.1016/j.jhazmat.2021.125407 ↗
28. Low-carbon shape-stable phase change composite utilizing semi-coke ash for building thermal energy storage10.1016/j.solmat.2024.112823 ↗
29. Investigation on low-carbon shape-stable phase change composite by steel slag and carbide slag for solar thermal energy storage10.1016/j.est.2023.109736 ↗
30. Sludge-incinerated ash based shape-stable phase change composites for heavy metal fixation and building thermal energy storage10.1016/j.psep.2022.04.004 ↗
31. Effects of CO2 capture on waste concrete/sodium nitrate form-stable phase change composites for energy storage10.1016/j.jclepro.2024.140896 ↗
32. Effect of ratio of desulfurization gypsum to carbide slag on low-carbon phase change composites for energy storage10.1016/j.est.2024.112086 ↗
33. Recycling utilization patterns of coal mining waste in China10.1016/j.resconrec.2010.05.005 ↗
34. Of coal mining wastes in civil engineering part 2:utilization of minesrtone10.1016/0956-053X(95)00008-N ↗
35. Comprehensive utilization and environmental risks of coal gangue: a review10.1016/j.jclepro.2019.117946 ↗
36. Effect of coal gangue with different kaolin contents on compressive strength and pore size of blended cement paste10.1007/s11595-006-1012-2 ↗
37. Preparation and characterization of coal gangue geopolymers10.1016/j.conbuildmat.2018.07.220 ↗
38. Effect and mechanism of coal gangue concrete modification by fly ash10.1016/j.conbuildmat.2021.123563 ↗
39. Influence of thermally activated coal gangue powder on the structure of the interfacial transition zone in concrete10.1016/j.jclepro.2022.132408 ↗
40. Expanded graphite embedded with aluminum nanoparticles as superior thermal conductivity anodes for high-performance lithium-ion batteries
41. A novel effective thermal conductivity correlation of the PCM melting in spherical PCM encapsulation for the packed bed TES system10.1016/j.applthermaleng.2018.02.048 ↗
42. A shape-stable phase change material for high-temperature thermal energy storage based on coal fly ash and Na2SO4-K2SO410.1016/j.solener.2024.112868 ↗
43. Efficient solar thermal storage of foamy bamboo charcoal-based composite phase change materials10.1016/j.solener.2023.112269 ↗
44. Solar to thermal energy storage performance of composite phase change material supported by copper foam loaded with graphite and boron nitride10.1016/j.solener.2024.112459 ↗
45. Expanded vermiculite: a promising natural encapsulation material of LiNO3, NaNO3, and KNO3 phase change materials for medium‐temperature thermal energy storage10.1002/adem.201800135 ↗
46. Sodium nitrate – diatomite composite materials for thermal energy storage10.1016/j.solener.2017.03.003 ↗
47. Fabrication and optimization of kaolin/stearic acid composite as a form-stable phase change material for application in the thermal energy storage systems10.1016/j.est.2020.102155 ↗
48. Jt · 2010
49. A review of performance investigation and enhancement of shell and tube thermal energy storage device containing molten salt based phase change materials for medium and high temperature applications10.1016/j.apenergy.2019.113806 ↗
50. 2016