Revealing the effect of phosphorus diffusion gettering on industrial silicon heterojunction solar cell
Source abstract
Abstract
Here we have conducted a comprehensive experimental and theoretical investigation into the impact of the phosphorus diffusion gettering (PDG) process on n-type industrial silicon heterojunction (SHJ) solar cells. Our findings indicate that phosphorus penetrates deeply into the silicon substrate as circular channels. While PDG effectively eliminates Fe from silicon wafers, it also introduces impurities like O, P, and Cu, which are not entirely eradicated during subsequent cleaning and texturing processes. Optimizing the gas flow to 1000 sccm achieved a balance between carrier lifetime and saturated dark current density in SHJ solar cells, resulting in a 0.21% increase in average efficiency to 25.14%. Simulated analyses revealed that variations in energy loss due to different gas flows were primarily attributed to bulk recombination and series resistance. Our work provides valuable insights for the application and improvement of the PDG process in industrial SHJ solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Integrated Circuits and Semiconductor Failure Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Status and perspectives of crystalline silicon photovoltaics in research and industry
2. Highlights of mainstream solar cell efficiencies in 202310.1007/s11708-024-0937-5 ↗
3. Historical market projections and the future of silicon solar cells10.1016/j.joule.2023.11.006 ↗
4. Recent advancements in poly-Si/SiOx passivating contacts for high-efficiency silicon solar cells: technology review and perspectives10.1039/D2TA04730F ↗
5. Laser doping selective emitter with thin borosilicate glass layer for n-type TOPCon c-Si solar cells10.1016/j.solmat.2023.112230 ↗
6. Strategies for realizing high-efficiency silicon heterojunction solar cells
7. Toward efficiency limits of crystalline silicon solar cells: recent progress in high‐efficiency silicon heterojunction solar cells
8. Silicon heterojunction solar cells with up to 26.81% efficiency achieved by electrically optimized nanocrystalline-silicon hole contact layers10.1038/s41560-023-01255-2 ↗
9. The National Renewable Energy Laboratory (NREL, accessed: May 2024), https://www.nrel.gov/pv/cell-efficiency.html.
10. Comprehensive simulation study of industrially relevant silicon solar cell architectures for an optimal material parameter choice10.1002/pip.2790 ↗
11. Gettering in silicon photovoltaics: a review
12. n-type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
13. Optimizing phosphorus diffusion for photovoltaic applications: peak doping, inactive phosphorus, gettering, and contact formation10.1063/1.4949326 ↗
14. Impact of metal contamination in silicon solar cells10.1002/adfm.201000849 ↗
15. Identification of the most relevant metal impurities in mc-n-type silicon for solar cells10.1016/j.solmat.2015.06.028 ↗
16. Phosphorus diffusion and gettering in a solar cell process using umg silicon10.4191/kcers.2012.49.6.637 ↗
17. Phosphorus gettering and intrinsic gettering of nickel in silicon10.1063/1.95364 ↗
18. Optimized phosphorus diffusion process and performance improvement of c-Si solar cell by eliminating SiP precipitates in the emitter10.1007/s10854-019-01765-4 ↗
19. Modeling phosphorus diffusion gettering of iron in single crystal silicon10.1063/1.3068337 ↗
20. Defect engineering of p-type silicon heterojunction solar cells fabricated using commercial-grade low-lifetime silicon wafers10.1002/pip.3230 ↗
21. Impact of phosphorus gettering parameters and initial iron level on silicon solar cell properties10.1002/pip.2215 ↗
22. Pre-fabrication gettering and hydrogenation treatments for silicon heterojunction solar cells: a possible path to >700 mV open-circuit voltages using low-lifetime commercial-grade p-type czochralski silicon10.1002/solr.201700221 ↗
23. Large-area boron-doped 1.6 ω cm p-type czochralski silicon heterojunction solar cells with a stable open-circuit voltage of 736 mv and efficiency of 22.0
24. Silicon heterojunction solar cells achieving 26.6% efficiency on commercial-size p-type silicon wafer10.1016/j.joule.2024.01.015 ↗
25. Mechanisms of transition-metal gettering in silicon10.1063/1.1289273 ↗
26. Investigating wafer quality in industrial czochralski-grown gallium-doped p-type silicon ingots with melt recharging10.1002/solr.202300304 ↗
27. Auger-limited bulk lifetimes in industrial Czochralski-grown n-type silicon ingots with melt recharging
28. Phosphorous diffusion gettering of n-type CZ silicon wafers for improving the performances of silicon heterojunction solar cells10.1016/j.solmat.2016.05.023 ↗
29. Direct observation of the impurity gettering layers in polysilicon-based passivating contacts for silicon solar cells10.1021/acsaem.8b00367 ↗
30. Silicon heterojunction solar cells: techno-economic assessment and opportunities10.1016/j.joule.2022.02.009 ↗
31. Comparing the gettering effect of heavily doped polysilicon films and its implications for tunnel oxide-passivated contact solar cells10.1002/solr.202370081 ↗
32. Effect of rear pyramid structures on industrial bifacial PERCs under omnidirectional incidence10.1016/j.energy.2024.132216 ↗
33. Towards high-efficiency industrial p-type mono-like Si PERC solar cells10.1016/j.solmat.2019.110202 ↗
34. Low-cost metallization based on Ag/Cu fingers for exceeding 25% efficiency in industrial silicon heterojunction solar cells10.1002/solr.202470114 ↗
35. Phosphorous diffusion gettering of n-type CZ silicon wafers for improving the performances of silicon heterojunction solar cells10.1016/j.solmat.2016.05.023 ↗
36. Impact of pre-fabrication treatments on n-type UMG wafers for 21% efficient silicon heterojunction solar cells
37. Front contact optimization for rear-junction SHJ solar cells with ultra-thin n-type nanocrystalline silicon oxide10.1016/j.solmat.2020.110471 ↗
38. https://www.pvlighthouse.com.au.
39. Review of light-induced degradation in crystalline silicon solar cells10.1016/j.solmat.2015.11.047 ↗
40. Effects of phosphorus doping and postgrowth laser annealing on the structural, electrical, and chemical properties of phosphorus-doped silicon films10.1021/acsaelm.8b00057 ↗
41. Nanostructured phosphorus doped silicon/graphite composite as anode for high-performance lithium-ion batteries10.1021/acsami.7b04361 ↗
42. Enhanced carrier transport and optical gains in perovskite solar cells based on low-temperature prepared TiO2@SnO2 nanocrystals10.1016/j.jallcom.2024.173714 ↗
43. Analysis of photocarrier dynamics at interfaces in perovskite solar cells by time-resolved photoluminescence10.1021/acs.jpcc.8b07069 ↗
44. Unveiling the mechanism of attaining high fill factor in silicon solar cells10.1002/pip.3775 ↗
45. Reassessment of the limiting efficiency for crystalline silicon solar cells10.1109/JPHOTOV.2013.2270351 ↗
46. Photovoltaic performance of flexible perovskite solar cells under bending state10.1016/j.solener.2022.08.070 ↗