Flexible MoS2/CNF/PEG phase change film with superior photothermal conversion and thermal energy storage
Source abstract
Abstract
High latent heat flexible phase change materials (PCMs) with photothermal conversion ability have great application potential in the field of advanced thermal management and efficient utilization of solar energy. However, the traditional organic PCM faces the challenges of easy leakage, bad solar light harvesting and poor flexibility. In this paper, cellulose nanofibers (CNF) incorporate molybdenum disulfide (MoS 2) has been self-assembled into a flexible layered porous film, which has been used to encapsulate polyethylene glycol (PEG) and prepare phase change films. Due to the capillary forces of the layered porous structure and the hydrogen bonding between CNF and PEG, the composite phase change film showed excellent structure-stability and non-leakage performances. Besides, the addition of MoS 2 enables the composite PCMs excellent solar harvesting ability, and the output voltage was increased from 63.8 mV to 147.9 mV, which explained the outstanding solar-thermal-electricity conversion. In addition, the phase change film showed latent heat capacity as high as 111.00 J/g. After 20 heating/cooling cycles, the composite PCMs remains the same phase change properties, suggesting good cycling performances. Therefore, the as-prepared phase change films were believed to show great application potential in the thermal management of flexible wearable devices.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Solar-Powered Water Purification Methods · Solar Thermal and Photovoltaic Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Strategies to save energy in the context of the energy crisis: a review10.1007/s10311-023-01591-5 ↗
2. Design of 3D-network montmorillonite nanosheet/stearic acid shape-stabilized phase change materials for solar energy storage10.1016/j.solmat.2019.110233 ↗
3. Vertically aligned montmorillonite aerogel-encapsulated polyethylene glycol with directional heat transfer paths for efficient solar thermal energy harvesting and storage10.1007/s12613-023-2794-3 ↗
4. Generation of green hydrogen using self-sustained regenerative fuel cells: opportunities and challenges10.1016/j.ijhydene.2023.03.430 ↗
5. Monolithic MXene aerogels encapsulated phase change composites with superior photothermal conversion and storage capability10.3390/nano13101661 ↗
6. Three-dimensional montmorillonite/Ag nanowire aerogel supported stearic acid as composite phase change materials for superior solar-thermal energy harvesting and storage10.1016/j.compscitech.2021.109121 ↗
7. Response to the design conditions of a tube-bundle thermal energy storage unit with paraffin-copper foam composite as a storage medium10.1016/j.ijheatmasstransfer.2024.125679 ↗
8. Geophysical constraints on the reliability of solar and wind power worldwide10.1038/s41467-021-26355-z ↗
9. Recent developments in phase change materials for energy storage applications: a review10.1016/j.ijheatmasstransfer.2018.09.126 ↗
10. Improving thermal conductivity of styrene ethylene butylene styrene/paraffin/boron nitride phase change composite via the sacrificial template method for battery thermal management10.1016/j.polymer.2024.127148 ↗
11. Flexible graphene aerogel-based phase change film for solar-thermal energy conversion and storage in personal thermal management applications10.1016/j.cej.2021.129637 ↗
12. Nature-inspired solar-thermal gradient reduced graphene oxide aerogel-based bilayer phase change composites for self-adaptive personal thermal management10.1002/adfm.202212032 ↗
13. High-safety lithium-ion battery separator with adjustable temperature function inspired by the sugar gourd structure10.1021/acsami.4c04937 ↗
14. Bioinspired passive cooling hydrogel for visualizing hygroscopicity and desorption process
15. MXene based flexible composite phase change material with shape memory, self-healing and flame retardant for thermal management10.1016/j.compscitech.2023.109945 ↗
16. Flexible thermoregulatory microcapsule/polyurethane-MXene composite films with multiple thermal management functionalities and excellent EMI shielding performance10.1016/j.jmst.2023.05.013 ↗
17. Flexible composite phase change material with anti-leakage and anti-vibration properties for battery thermal management10.1016/j.apenergy.2021.118434 ↗
18. Multifunctional phase change textiles with electromagnetic interference shielding and multiple thermal response characteristics10.1016/j.cej.2023.144500 ↗
19. Thermal management of Lithium-ion battery pack through the application of flexible form-stable composite phase change materials10.1016/j.applthermaleng.2020.116151 ↗
20. Ultraflexible, cost-effective and scalable polymer-based phase change composites via chemical cross-linking for wearable thermal management10.1038/s41467-023-43772-4 ↗
21. Melamine foam/reduced graphene oxide supported form-stable phase change materials with simultaneous shape memory property and light-to-thermal energy storage capability10.1016/j.cej.2019.122373 ↗
22. Flexible phase change materials: preparation, properties and application10.1016/j.cej.2021.134231 ↗
23. Novel flexible phase change materials with high emissivity, low thermal conductivity and mechanically robust for thermal management in outdoor environment10.1016/j.apenergy.2023.121556 ↗
24. Room-temperature flexible phase change material with high emissivity and high enthalpy for building energy saving10.1016/j.renene.2024.121253 ↗
25. Flexible phase change material fiber: a simple route to thermal energy control textiles10.3390/ma14020401 ↗
26. Facile fabrication of robust and stretchable cellulose nanofibers/polyurethane hybrid aerogels10.1021/acssuschemeng.0c01564 ↗
27. A shape-stable phase change composite prepared from cellulose nanofiber/polypyrrole/polyethylene glycol for electric-thermal energy conversion and storage10.1016/j.cej.2020.125950 ↗
28. Cellulose nanofibers enable paraffin encapsulation and the formation of stable thermal regulation nanocomposites10.1016/j.nanoen.2017.03.010 ↗
29. Bio-based flexible phase change composite film with high thermal conductivity for thermal energy storage10.1016/j.compositesa.2021.106638 ↗
30. Chemical and molecular structure transformations in atomistic conformation of cellulose nanofibers under thermal environment10.1038/s41529-022-00224-6 ↗
31. A phase-change material with high through-plane thermal conductivity comprising a palmitic acid-cellulose nanofiber matrix with via acylation an expanded graphite@cellulose nanofiber@carbon nanotube hybrid filler10.1016/j.polymertesting.2022.107880 ↗
32. Multifunctional phase change composites based on elastic MXene/silver nanowire sponges for excellent thermal/solar/electric energy storage, shape memory, and adjustable electromagnetic interference shielding functions10.1021/acsami.1c23303 ↗
33. An intrinsically flexible phase change film for wearable thermal managements10.1016/j.ensm.2020.10.014 ↗
34. Cellulose nanofibers from softwood, hardwood, and tunicate: preparation-structure-film performance interrelation10.1021/acsami.7b01738 ↗
35. Synthesis of highly thermal conductive carbon nanotubes on cellulose nanofiber film-loaded polyethylene glycol phase change material with flame retardancy by layered double hydroxide10.1016/j.est.2023.108717 ↗
36. Production, structural design, functional control, and broad applications of carbon nanofiber-based nanomaterials: a comprehensive review10.1016/j.cej.2020.126189 ↗
37. Enhanced solar evaporation using a scalable MoS2-based hydrogel for highly efficient solar desalination
38. Novel MoS2/montmorillonite hybrid aerogel encapsulated PEG as composite phase change materials with superior solar-thermal energy harvesting and storage10.1016/j.jcis.2024.04.107 ↗
39. A sustainable and robust Janus film Inspired by the bird's nest structure for efficient year-round outdoor thermal management10.1016/j.cej.2024.156918 ↗
40. Self-assembly of binderless MXene aerogel for multiple-scenario and responsive phase change composites with ultrahigh thermal energy storage density and exceptional electromagnetic interference shielding10.1007/s40820-023-01288-y ↗