journal article·2025-04

Micro-interface engineering of CuO-coated copper mesh for enhanced solar absorption and localized heating in continuous seawater desalination

Zhipeng Chen, Zhirun Qian, Yunfeng Wu, Fuzhi Wang, Tingting Chen, Bocheng Su, Kangwei Wen, Lin Qin, Youhua Zhu, Zhenguo Wang, Haihong Yin

Publisher page

Abstract

In recent years, CuO has garnered significant attention in solar thermal conversion due to its excellent light absorption, high stability, and low cost. However, due to the Fresnel reflection effect in the thin film state of CuO materials and the additional interfacial losses in CuO composites, the photothermal conversion efficiency will be seriously reduced. The micro-interfaces engineering within photothermal materials are considered critical in determining the photothermal conversion efficiency. Therefore, it is significant to investigate the influence of CuO materials with different micro-interfaces on the photothermal conversion efficiency through micro-interface engineering. In this study, three CuO with different micro-interfaces were proposed—CuO Nanowires@copper mesh (CONWs), CuO Nanorods@copper mesh (CONRs), and CuO Nanospheres@copper mesh (CONSPs)—by controlling the oxidation state at the interface. The nanowire-like structure of CONWs exhibits optimal light absorption and thermal localization performance, which can be confirmed by the optical model and finite element simulation. The system with CONWs achieved a steady-state temperature of 62.93 °C under 1000 W/m 2 (1000 W/m 2 = 1 sun) irradiation, a vapor generation rate of 1.36 kg/m 2/h, and a photothermal conversion efficiency of as high as 89.41 %. Meanwhile, anti-salt accumulation properties can be observed in CONWs, which are considered critical for sustaining long-term solar thermal seawater evaporation. Moreover, the electronic structure, as well as the thermodynamic properties of CONWs, including energy band structure, charge density, phonon spectrum, partial density of states (PDOS) et al. were thoroughly conducted to confirm the excellent light absorption and thermal localization of the proposed CONWs. All results indicate that the CONWs, with outstanding photothermal conversion efficiency and material stability, can be expected to be applied as light-absorbing layer materials for solar vapor generation devices.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar-Powered Water Purification Methods · Solar Thermal and Photovoltaic Systems · Membrane Separation Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. TiN, ZrN, and HfN nanoparticles on nanoporous aluminum oxide membranes for solar-driven water evaporation and desalination10.1021/acsanm.0c00107 ↗
2. Carbon materials for solar steam-generation10.1016/j.carbon.2023.118373 ↗
3. Water activation in solar‐powered vapor generation10.1002/adma.202212100 ↗
4. Numerical thermal control design for applicability to a large-scale high-capacity lithium-ion energy storage system subjected to forced cooling
5. Salt mitigation strategies of solar‐driven interfacial desalination
6. Enabling self‐adaptive water‐energy‐balance of photothermal water diode evaporator: dynamically maximizing energy utilization under the ever‐changing sunlight10.1002/adma.202309507 ↗
7. Three-dimensional hierarchical porous carbon surface-decorated graphitic carbon foam/stearic acid composite as high-performance shape-stabilized phase change material with desirable photothermal conversion efficiency10.1016/j.apenergy.2023.121995 ↗
8. Converting pomelo peel into eco-friendly and low-consumption photothermic biomass sponge toward multifunctional solar-to-heat conversion10.1021/acssuschemeng.0c00681 ↗
9. Self‐floating efficient solar steam generators constructed using super‐hydrophilic N, O dual‐doped carbon foams from waste polyester10.1002/eem2.12235 ↗
10. Wood-based solar-driven interfacial evaporators: design and application10.1016/j.cej.2023.144517 ↗
11. Biomimetic MXene textures with enhanced light‐to‐heat conversion for solar steam generation and wearable thermal management10.1002/aenm.201970141 ↗
12. Interfacial solar steam generation by wood-based devices to produce drinking water: a review10.1007/s10311-022-01501-1 ↗
13. Water skin effect and arched double‐sided evaporation for boosting all‐weather high salinity desalination
14. Hierarchical Cu dendrites@ CuO multifunctional nanowire mesh for solar-thermal clean water production10.1016/j.desal.2023.117114 ↗
15. T-shape solar evaporator constructed with natural wood and Ti2O3 nanoparticles for water evaporation and desalination10.1016/j.mtsust.2023.100538 ↗
16. Versatile PVA/CS/CuO aerogel with superior hydrophilic and mechanical properties towards efficient solar steam generation10.1002/nano.202100125 ↗
17. Multifunctional CuO nanowire mesh for highly efficient solar evaporation and water purification10.1021/acssuschemeng.8b06679 ↗
18. Enhancing solar absorbance using a 2D graphene oxide/CuO composite film for efficient solar desalination
19. High‐performance water purification and desalination by solar‐driven interfacial evaporation and photocatalytic VOC decomposition enabled by hierarchical TiO2‐CuOnanoarchitecture10.1002/er.7249 ↗
20. The energy efficiency of interfacial solar desalination10.1016/j.apenergy.2021.117581 ↗
21. Tailoring nanoscale surface topography of hydrogel for efficient solar vapor generation10.1021/acs.nanolett.9b00252 ↗
22. 3D-Printed liquid metal-in-hydrogel solar evaporator: merging spectrum-manipulated micro-nano architecture and surface engineering for solar desalination
23. Anisotropic MXene/poly (vinyl alcohol) composite hydrogels with vertically oriented channels and modulated surface topography for efficient solar-driven water evaporation and purification10.1021/acsami.3c18661 ↗
24. Capillary action promoted enhanced photothermal desalination and separation of impurities from water using honeycomb structured porous magnetic nanoparticles derived from waste biomass10.1021/acsestengg.3c00297 ↗
25. Advancements in solar desalination of seawater by various Ti3C2 MXene based morphologies for freshwater generation: a review10.3390/catal11121435 ↗
26. Shape control of semiconductor and metal oxide nanocrystals through nonhydrolytic colloidal routes10.1002/anie.200503821 ↗
27. Effect of different MoS2 morphologies on the formation and performance of adsorptive-catalytic nanocomposite membranes10.1038/s41545-024-00360-3 ↗
28. Silver nanowires contained nanofluids with enhanced optical absorption and thermal transportation properties10.1002/eem2.12027 ↗
29. Hierarchical graphene foam for efficient omnidirectional solar–thermal energy conversion10.1002/adma.201702590 ↗
30. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
31. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
32. Driving force and growth mechanism for spontaneous oxide nanowire formation during the thermal oxidation of metals10.1016/j.actamat.2010.12.052 ↗
33. Hydrophobic light-to-heat conversion membranes with self-healing ability for interfacial solar heating10.1002/adma.201502362 ↗
34. Tree‐inspired design for high‐efficiency water extraction10.1002/adma.201704107 ↗
35. Mushrooms as efficient solar steam-generation devices10.1002/adma.201606762 ↗
36. Biomass derived Janus solar evaporator for synergic water evaporation and purification10.1016/j.susmat.2020.e00180 ↗
37. Turning trash into treasure: pencil waste–derived materials for solar‐powered water evaporation10.1002/ente.202000567 ↗
38. Implementing hybrid energy harvesting in 3D spherical evaporator for solar steam generation and synergic water purification10.1002/solr.202000232 ↗
39. Solar steam generation by heat localization10.1038/ncomms5449 ↗
40. Ultra-fast growth of copper oxide (II) thin films using hydrothermal method10.1016/j.mssp.2020.105279 ↗
41. Efficient solar water splitting photocathodes comprising a copper oxide heterostructure protected by a thin carbon layer10.1021/acsaem.9b01290 ↗
42. On the specific heat capacity of CuO nanofluid10.1155/2010/172085 ↗
43. A low-cost lotus leaf-based carbon film for solar-driven steam generation10.1016/S1872-5805(20)60501-7 ↗
44. Sustainable off-grid desalination of hypersaline waters using Janus wood evaporators10.1039/D1EE01505B ↗
45. Solar driven interfacial steam generation derived from biodegradable Luffa sponge
46. Dual-functional CuO/CN for highly efficient solar evaporation and water purification10.1016/j.seppur.2020.117611 ↗
47. rGO‐CuOx composites reduced by solid‐phase microwave thermal shock for high‐efficient seawater desalination and purification
48. A floating integrated solar micro‐evaporator for self‐cleaning desalination and organic degradation10.1002/adfm.202214769 ↗
49. Biomimetic hydrophilic CuO-nanocluster/nanofibrous thin-film skeleton/hydrophilic CuO-nanocluster architecture membrane for efficient and stable solar water evaporation10.1016/j.jallcom.2023.172377 ↗
50. A solar-driven interfacial evaporator for seawater desalination based on mussel-inspired superhydrophobic composite coating10.1016/j.carbon.2023.118593 ↗