Design of spectrally selective multilayer stacks with optimized properties for mid-temperature concentrating solar applications
Source abstract
Abstract
This study presents an original method to optimally design the multi-layer stacks at varying layer counts, depths, and orders using 20 widely used candidate materials on copper (Cu) and stainless steel (SS) substrates. The water cycle algorithm (WCA) for the constrained design problem using genetic operators was adapted as an optimization algorithm. The study aims to design stacks for two different substrates, with high absorptivity (>0.95) in the solar spectrum and low emissivity (<0.1) in the infrared region for concentrating solar applications operating between 673 and 973 K. Two fitness functions, F 1 and F 2, are proposed and benchmarked at specified design conditions to analyze their efficacies. Results show that the increase in the coating efficiency ( η c ) is less than 0.94 % in the case of adding more than 5 layers on the substrates. The difference between the coating efficiencies of the proposed stacks using SS and Cu substrates is less than 0.26 %. It is believed that the advanced optimization algorithm given in the paper will pave the way for more efficient solar selective absorber designs.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: solar cell performance optimization · Solar Thermal and Photovoltaic Systems · Photovoltaic System Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Modeling, simulation and performance analysis of parabolic trough solar collectors: a comprehensive review10.1016/j.apenergy.2018.05.014 ↗
2. Prioritization of heat transfer fluids in parabolic trough solar systems using CFD-assisted AHP-VIKOR approach10.1016/j.renene.2023.04.048 ↗
3. Thermal and thermodynamic benchmarking of liquid heat transfer fluids in a high concentration ratio parabolic trough solar collector system10.1016/j.molliq.2020.114151 ↗
4. Kennedy · 2002
5. Optimal design of ultrabroadband omnidirectional planar structure absorber using anti-reflection coatings10.1007/s12596-021-00760-5 ↗
6. Coatings for concentrating solar systems–A review10.1016/j.rser.2015.01.015 ↗
7. Optimization of AlxOy/Pt/AlxOy multilayer spectrally selective coatings for solar–thermal applications10.1016/j.vacuum.2012.06.012 ↗
8. Characterization of TiAlSiN/TiAlSiON/SiO2 optical stack designed by modelling calculations for solar selective applications10.1016/j.solmat.2012.06.011 ↗
9. Thermal aging characteristics of CrNxOy solar selective absorber coating for flat plate solar thermal collector applications10.1016/j.solmat.2013.03.005 ↗
10. Growth, characterization and performance evaluation of Ti/AlTiN/AlTiON/AlTiO high temperature spectrally selective coatings for solar thermal power applications10.1016/j.solmat.2014.07.037 ↗
11. A Tantalum diffusion barrier layer to improve the thermal stability of AlxOy/Pt/AlxOy multilayer solar absorber10.1016/j.solener.2014.05.029 ↗
12. Functional multi-layer nitride coatings for high temperature solar selective applications10.1016/j.solmat.2013.10.024 ↗
13. Solar selective absorbing coatings TiN/TiSiN/SiN prepared on stainless steel substrates10.1016/j.vacuum.2015.08.013 ↗
14. AlMoN based spectrally selective coating with improved thermal stability for high temperature solar thermal applications10.1016/j.solener.2015.06.047 ↗
15. Enhanced optical properties of TiN-based spectrally selective solar absorbers deposited at a high substrate temperature10.1016/j.solmat.2017.01.023 ↗
16. Optical parameters of a novel competitive selective absorber for low temperature solar thermal applications10.1016/j.solmat.2018.01.031 ↗
17. Spectrally selective solar absorber stable up to 900 °C for 120 h under ambient conditions10.1016/j.solener.2018.09.009 ↗
18. Structural and optical properties of ZrOx/Zr/ZrOx/AlxOy multilayered coatings as selective solar absorbers10.1016/j.jallcom.2018.09.329 ↗
19. Scalable-manufactured metal–insulator–metal based selective solar absorbers with excellent high-temperature insensitivity10.1016/j.apenergy.2020.116055 ↗
20. Enhanced thermal stability of the metal/dielectric multilayer solar selective absorber by an atomic-layer-deposited Al2O3 barrier layer10.1016/j.apsusc.2020.148678 ↗
21. Enhanced high-temperature thermal stability of the novel MoAlSiN-based solar selective absorbing coatings by optimizing the multilayer structure
22. Annealing enhanced optical performances of nano-multilayered TiAlN/AlCrSiN-based solar selective absorber10.1016/j.surfcoat.2023.130051 ↗
23. Optimization design of Ti0.5Al0.5N/Ti0.25Al0.75N/AlN coating used for solar selective applications10.1016/j.solmat.2011.01.006 ↗
24. Solar selective absorbing coatings based on AlSiN/AlSiON/AlSiOy layers10.1016/j.apsusc.2015.07.193 ↗
25. Optical characterization of TiAlNx/TiAlNy/Al2O3 tandem solar selective absorber coatings10.1016/j.solmat.2017.06.007 ↗
26. Multi-layer solar selective absorber coatings based on W/WSiAlNx/WSiAlOyNx/SiAlOx for high temperature applications10.1016/j.solmat.2018.07.001 ↗
27. Design and simulation of different multilayer solar selective coatings for solar thermal applications10.1088/2053-1591/aab871 ↗
28. Design, fabrication and optical characterizations of large-area lithography-free ultrathin multilayer selective solar coatings with excellent thermal stability in air10.1016/j.solmat.2017.09.025 ↗
29. Optimized design of multi-layer nano-photonic structures for selective absorption applications by artificial neural networks10.1007/s11468-020-01327-z ↗
30. Refractiveindex. info database of optical constants10.1038/s41597-023-02898-2 ↗
31. Optical constants of minerals and other materials from the millimeter to the ultraviolet
32. Optical properties of ZnSe10.1103/PhysRevB.43.9569 ↗
33. Characterization of e-beam evaporated Ge, YbF3, ZnS, and LaF3 thin films for laser-oriented coatings10.1364/AO.59.000A40 ↗
34. Optical constants and inelastic electron-scattering data for 17 elemental metals10.1063/1.3243762 ↗
35. Optical properties of Al, Fe, Ti, Ta, W, and Mo at submillimeter wavelengths10.1364/AO.27.001203 ↗
36. Dynamic optical properties of metal hydrides10.1021/acsphotonics.8b01243 ↗
37. Optical properties of metallic films for vertical-cavity optoelectronic devices10.1364/AO.37.005271 ↗
38. Self-consistent optical constants of SiO2 and Ta2O5 films10.1364/OME.6.003622 ↗
39. Mid-infrared optical properties of thin films of aluminum oxide, titanium dioxide, silicon dioxide, aluminum nitride, and silicon nitride10.1364/AO.51.006789 ↗
40. Optical properties of silicon nitride10.1149/1.2403440 ↗
41. Broadband mid-infrared frequency comb generation in a Si3N4 microresonator10.1364/OL.40.004823 ↗
42. Self-consistent optical constants of SiC thin films10.1364/JOSAA.28.002340 ↗
43. Electronic structure of amorphous Si from photoemission and optical studies10.1103/PhysRevB.5.3017 ↗
44. Palik · 1985
45. Large-scale high aspect ratio Al-doped ZnO nanopillars arrays as anisotropic metamaterials10.1364/OME.7.001606 ↗
46. Optical constants of transition metals: Ti, V, Cr, Mn, Fe, Co, Ni, and Pd10.1103/PhysRevB.9.5056 ↗
47. Optical properties of Au, Ni, and Pb at submillimeter wavelengths10.1364/AO.26.000744 ↗
48. Permittivity of Ge, Te and Se thin films in the 200–1500 nm spectral range. Predicting the segregation effects in silver10.1016/j.mssp.2018.03.003 ↗
49. Optical constants
50. Thickness-dependent optical properties of aluminum nitride films for mid-infrared wavelengths10.1116/6.0000884 ↗
51. Erratum:“Thickness-dependent optical properties of aluminum nitride films for mid-infrared wavelengths”10.1116/6.0000884 ↗
52. Dispersions of optical constants and emissivities of iron and steel in the temperature range up to the curie point10.1299/jsme1958.20.1607 ↗
53. Thermo-mathematical modeling of parabolic trough collector10.1016/j.enconman.2014.09.031 ↗
54. Pozar · 2011
55. Water cycle algorithm–A novel metaheuristic optimization method for solving constrained engineering optimization problems10.1016/j.compstruc.2012.07.010 ↗
56. Water cycle algorithm with adaptive sea and rivers and enhanced position updating strategy for numerical optimization10.1007/s00521-023-08365-8 ↗
57. Modified swarm intelligence algorithms for the pharmacy duty scheduling problem10.1016/j.eswa.2022.117246 ↗
58. A novel multi population based particle swarm optimization for feature selection10.1016/j.knosys.2021.106894 ↗
59. Sadollah
60. Thermal and thermodynamic optimization of the performance of a large aperture width parabolic trough solar collector using gaseous and supercritical CO2 as heat transfer fluids
61. Adaptive co-optimization of artificial neural networks using evolutionary algorithm for global radiation forecasting10.1016/j.renene.2021.02.074 ↗
62. Multilayers for efficient thermal energy conversion in high vacuum flat solar thermal panels10.1016/j.tsf.2021.138869 ↗