Study on subgrain boundaries in cast monocrystalline silicon
Source abstract
Abstract
Cast monocrystalline silicon (mono-Si), also known as quasi-mono-Si, has been recognized for its potential as a high-performance crystalline silicon material due to its low manufacturing costs and high crystal quality. This study investigated the occurrence of high-density dislocation loops in cast mono-Si, which exhibited grid-like propagation caused mostly by subgrain boundaries. The study looked at the fundamental properties of these subgrain boundaries as well as the mechanisms that allow them to propagate in a grid-like pattern within cast mono-Si. Observations revealed differences in the crystallographic misorientation of subgrain boundaries across the ingot, ranging from 1 to 3°. Electron Beam Induced Current (EBIC) tests revealed strong recombination activity at these boundaries under typical conditions. As the temperature gradually decreases from 300 K to 80 K during EBIC testing, subgrain boundaries with shallower energy states emerge, which become more apparent in photoluminescence (PL) tests conducted on Si wafers cut from different heights of the ingot.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Effects of impurity barrier layer on the red zone at the bottom of cast monocrystalline Si ingot for solar cells10.1002/solr.202300383 ↗
2. Improving quality of cast monocrystalline Si ingot with seed crystal strips and graphite soft felt10.1016/j.solmat.2023.112416 ↗
3. Higher quality composite silicon ingot with monocrystalline and multicrystalline bricks10.1016/j.solener.2022.08.068 ↗
4. Seed-assisted cast quasi-single crystalline silicon for photovoltaic application: towards high efficiency and low cost silicon solar cells10.1016/j.solmat.2012.02.024 ↗
5. Impact of seed orientation on dislocation propagation in cast seed-assisted monocrystalline silicon10.1016/j.solmat.2021.111084 ↗
6. Growth of low-cost and high-quality monocrystalline silicon ingots by using split recycled seeds10.1016/j.mssp.2021.106318 ↗
7. Evaluation of large-scale recycled seed for cast monocrystalline silicon: defect multiplication mechanisms and feasibility10.1016/j.solmat.2021.111266 ↗
8. Distribution and propagation of dislocation defects in quasi-single crystalline silicon ingots cast by the directional solidification method10.1016/j.solmat.2014.08.022 ↗
9. Suppression of dislocations and twins by inducing asymmetrical grain boundaries for casting high-quality monocrystalline silicon ingot10.1016/j.vacuum.2022.111533 ↗
10. Study on growth behavior of twins in cast monocrystalline silicon
11. Defect formation induced by seed-joints during directional solidification of quasi-mono-crystalline silicon ingots10.1016/j.jcrysgro.2014.08.002 ↗
12. Seeded grown Mono-Like Si ingots: effect on recombination activity of dislocations
13. In situ investigation of the structural defect generation and evolution during the directional solidification of <110> seeded growth Si10.1016/j.actamat.2016.06.004 ↗
14. Sub-grain boundaries sources and effects in large Mono-like Silicon ingots for PV
15. Utility of Shockley-Read-Hall analysis to extract defect properties from semiconductor minority carrier lifetime data10.1063/5.0147482 ↗
16. Experimental verification of Shockley-Read-Hall recombination theory in silicon10.1049/el:19730279 ↗
17. Controlling solidification front shape and thermal stress in growing quasi-single-crystal silicon ingots: process design for seeded directional solidification10.1016/j.applthermaleng.2015.08.023 ↗