journal article·2024-06

Experiments and cellular automata simulation of corrosion and protection of Hastelloy X in high-temperature chloride molten salts

Dongxu Jiang, Jianfeng Lu, Jing Ding, Weilong Wang

Publisher page

Abstract

Molten salts are excellent heat transfer and storage materials due to their outstanding properties, but their strong corrosive properties at high temperatures will cause severe negative consequences. In this paper, a cellular automata (CA) model is developed by MATLAB software to simulate the corrosion behavior of Hastelloy X alloy in NaCl–KCl–MgCl 2 ternary molten salt. The simulated reliability is validated through a 7-day corrosion experiment. The simulation investigated factors influencing corrosion layer thickness, studied the formation of pitting behavior, and simulated the corrosion inhibition of surface coatings. The simulation results indicated that the composition of alloy, the concentration of O 2 and Cl 2, and the reaction rate are the main reasons for the serious corrosion of the alloy. By increasing the density and thickness of the coating can effectively alleviate corrosion. Compared with conventional corrosion experiments, the CA model can monitor real-time atomic migration at the metal-molten salt interface, track element distribution within the metal, and shorten the corrosion experiment period, which is of significance to study and predict the corrosion behavior of alloys in molten salts.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Molten salt chemistry and electrochemical processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Energy storage needs for the substitution of fossil fuel power plants with renewables10.1016/j.renene.2019.06.066 ↗
2. China's non-fossil energy development and its 2030 CO2 reduction targets: the role of urbanization10.1016/j.apenergy.2019.114353 ↗
3. Solar thermal energy technologies and its applications for process heating and power generation – a review
4. A review of concentrated solar power hybrid technologies10.1016/j.applthermaleng.2017.08.038 ↗
5. Novel hybrid system of pulsed HHO generator/TEG waste heat recovery for CO reduction of a gasoline engine10.1016/j.ijhydene.2020.06.075 ↗
6. Hybrid concentrated solar thermal power systems: a review10.1016/j.rser.2017.05.067 ↗
7. The corrosion behaviour of stainless steels and Ni-based alloys in nitrate salts under thermal cycling conditions in concentrated solar power plants10.1016/j.solener.2021.12.072 ↗
8. A review on progress of concentrated solar power in India10.1016/j.rser.2017.05.086 ↗
9. Experimental study on thermophysical properties of molten salt nanofluids prepared by high-temperature melting10.1016/j.solmat.2018.11.003 ↗
10. Evaluation of discharging performance of molten salt/ceramic foam composite phase change material in a shell-and-tube latent heat thermal energy storage unit10.1016/j.renene.2022.08.124 ↗
11. Corrosion in the molten fluoride and chloride salts and materials development for nuclear applications10.1016/j.pmatsci.2018.05.003 ↗
12. Advanced heat transfer fluids for direct molten salt line-focusing CSP plants10.1016/j.pecs.2018.02.002 ↗
13. Comparative review of different influence factors on molten salt corrosion characteristics for thermal energy storage10.1016/j.solmat.2021.111485 ↗
14. Heat transfer fluids for concentrating solar power systems – a review10.1016/j.apenergy.2015.01.125 ↗
15. Corrosion performance of austenitic stainless steel SS304 in molten nitrate salts and Raman microscopy for stability analysis in thermal energy storage applications10.1016/j.est.2021.103465 ↗
16. Preheating of solar power tower receiver tubes for a high-temperature chloride molten salt
17. Lessons learned from corrosion of materials with molten salts during molten salt tank preheating10.1016/j.solmat.2022.111943 ↗
18. Corrosion behavior of Ni-based alloys in molten NaCl-CaCl2-MgCl2 eutectic salt for concentrating solar power10.1016/j.solmat.2017.05.050 ↗
19. Alloying effects in high temperature molten salt corrosion10.1016/j.corsci.2021.110003 ↗
20. In-situ MgO generation method: a new strategy for mitigating the corrosivity of molten chloride salt10.1016/j.corsci.2022.110145 ↗
21. Cellular automata simulation on the corrosion behavior of Ni-base alloy in chloride molten salt
22. Simulation of corrosion process for concrete filled steel tubular columns with the cellular automata method10.1016/j.engfailanal.2017.06.006 ↗
23. Improvement of the corrosion properties in ternary molten nitrate salts for direct energy storage in CSP plants10.1016/j.solener.2016.05.030 ↗
24. Corrosion behavior of stainless and low-chromium steels and In625 in molten nitrate salts at 600°C10.1016/j.solmat.2015.08.011 ↗
25. High temperature corrosion behaviour of stainless steels and Inconel 625 in hydroxide salt, Mater
26. Corrosion behavior of 316SS and Ni-based alloys in a ternary NaCl-KCl-MgCl2 molten salt10.1016/j.solener.2018.06.094 ↗
27. Progress, gaps and obstacles in the classification of cellular automata10.1016/j.physd.2021.133074 ↗
28. Corrosion behaviour of stainless steels and a single crystal superalloy in a ternary LiCl–KCl–CsCl molten salt10.1016/j.corsci.2014.09.009 ↗
29. FPGA fabric conscious architecture design and automation of speed-area efficient Margolus neighborhood based cellular automata with variegated scan path insertion
30. Reversibility of general 1D linear cellular automata over the binary field Z2 under null boundary conditions10.1016/j.ins.2015.06.048 ↗
31. Effect of chloride ion content on pitting corrosion of dispersion-strengthened-high-strength steel10.1016/j.corcom.2022.03.005 ↗
32. Advanced titanium dioxide-polytetrafluorethylene (TiO2-PTFE) nanocomposite coatings on stainless steel surfaces with antibacterial and anti-corrosion properties10.1016/j.apsusc.2019.06.070 ↗
33. Corrosion resistance of ceria/polymethyltrimethoxysilane modified magnesium hydroxide coating on AZ31 magnesium alloy10.1016/j.surfcoat.2017.08.039 ↗
34. Improvement of corrosion resistance of Hastelloy-N alloy in LiF-NaF-KF molten salt by laser cladding pure metallic coatings10.3390/coatings8090322 ↗
35. Kinetics and mechanism of corrosion of oxide coating fabricated on aluminum alloy by the plasma electrolytic oxidation in molten salt10.1016/j.corsci.2022.110604 ↗
36. Hot corrosion behavior of plasma-sprayed NiCrAlY/TiO2 and NiCrAlY/Cr2O3/YSZ cermets coatings on alloy steel