journal article·2022-10

All-inorganic robust absorber for high-sun solar steam generation and solvent recovery

Tham Thao Trang Nguyen, Oleksii Omelianovych, Myoung Gil Choi, Anush Mnoyan, Ba Thong Trinh, Ilsun Yoon, Kyubock Lee, Ho-Suk Choi, Michael Keidar

Publisher page

Abstract

The mechanical and chemical stability of the light-absorber creates a limitation of the STS applications, especially in harsh operating conditions such as high temperature or aggressive solvents environment. The current study addresses the issue by proposing a highly stable and durable light absorber based on the gold nanoparticles (Au NPs) immobilized on the mesoporous silica-covered glass fiber (MSGF). Mesoporous silica coating improves the attachment of Au NPs to the fiber surface, while simultaneously increasing specific surface area. The synthesis parameters of the mesoporous silica layer and the Au NPs were adjusted to obtain favorable morphology, resulting in a 16.7% increase in the total solar weighted absorptance. The STS system based on two-dimensional Au-MSGF achieved the highest evaporation rate of 1.22 kg·m −2·h -1 under 1 sun illumination at 20 °C and relative humidity of 40%. Furthermore, the thermal stability and durability of glass fiber allowed the application of Au-MSGF for the STS at sunlight illumination intensities as high as 50-suns without any visible or performance degradation over extended periods. The inertness of the Au-MSGF plays an important role in the solvent recovery applications of the STS system. It was found that the hydrophobic coating of the light absorber improves the performance of the STS system for non-polar solvent recovery. The results indicate a significant (over 100% as compared to the evaporation in the darkroom) evaporation rate increase of octane and decane in the STS system operating under 1 and 2 suns, making them suitable for the STS solvent recovery.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar-Powered Water Purification Methods · Solar Thermal and Photovoltaic Systems · Solar Radiation and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Global agricultural economic water scarcity10.1126/sciadv.aaz6031 ↗
2. Sustainability: four billion people facing severe water scarcity10.1126/sciadv.1500323 ↗
3. Quantifying renewable groundwater stress with GRACE
4. Water pollution and its impact on the human health10.15764/EH.2015.01005 ↗
5. Steam generation under one sun enabled by a floating structure with thermal concentration10.1038/nenergy.2016.126 ↗
6. Solar steam generation by heat localization10.1038/ncomms5449 ↗
7. Broadband polarization-independent resonant light absorption using ultrathin plasmonic super absorbers10.1038/ncomms1528 ↗
8. Plasmonic chemically modified cotton nanocomposite fibers for efficient solar water desalination and wastewater treatment10.1039/C8NR05916K ↗
9. Self-assembly of highly efficient, broadband plasmonic absorbers for solar steam generation10.1126/sciadv.1501227 ↗
10. Salt mitigation strategies of solar-driven interfacial desalination
11. Large-scale cauliflower-shaped hierarchical copper nanostructures for efficient photothermal conversion10.1039/C6NR03662G ↗
12. Solar steam generation through bio-inspired interface heating of broadband-absorbing plasmonic membranes10.1016/j.apenergy.2017.03.080 ↗
13. Solar evaporation enhancement using floating light-absorbing magnetic particles10.1039/c1ee01532j ↗
14. An emergence of solar thermal utilization: solar-driven steam generation
15. Solar absorber material and system designs for photothermal water vaporization towards clean water and energy production
16. The revival of thermal utilization from the Sun: interfacial solar vapor generation10.1093/nsr/nwz030 ↗
17. Plasmonic wood for high-efficiency solar steam generation10.1002/aenm.201701028 ↗
18. 3D self-assembly of aluminium nanoparticles for plasmon-enhanced solar desalination10.1038/nphoton.2016.75 ↗
19. Two-dimensional defective tungsten oxide nanosheets as high performance photo-absorbers for efficient solar steam generation10.1016/j.solmat.2018.05.049 ↗
20. Flame synthesis of superhydrophilic carbon nanotubes/Ni foam decorated with Fe2O3 nanoparticles for water purification via solar steam generation10.1021/acsami.0c00606 ↗
21. Carbon-based sunlight absorbers in solar-driven steam generation devices
22. Sustainable desalination device capable of producing freshwater and electricity10.1016/j.desal.2022.115820 ↗
23. All-weather-available electrothermal and solar–thermal wood-derived porous carbon-based steam generators for highly efficient water purification10.1039/D1QM01544C ↗
24. Ultrahigh solar steam generation rate of a vertically aligned reduced graphene oxide foam realized by dynamic compression10.1039/D1TA03014K ↗
25. Superhydrophilic porous carbon foam as a self-desalting monolithic solar steam generation device with high energy efficiency10.1039/D0TA01439G ↗
26. Arched bamboo charcoal as interfacial solar steam generation integrative device with enhanced water purification capacity10.1002/adsu.201800144 ↗
27. Highly efficient solar vapour generation via hierarchically nanostructured gels10.1038/s41565-018-0097-z ↗
28. High-performance solar steam generator based on polypyrrole-coated fabric via 3D macro- and microstructure design10.1021/acsami.1c11802 ↗
29. Reshapable MXene/graphene oxide/polyaniline plastic hybrids with patternable surfaces for highly efficient solar-driven water purification
30. An environmental energy-enhanced solar steam evaporator derived from MXene-decorated cellulose acetate cigarette filter with ultrahigh solar steam generation efficiency10.1016/j.jcis.2021.08.043 ↗
31. Space-confined seeded growth of black silver nanostructures for solar steam generation10.1021/acs.nanolett.8b04157 ↗
32. Plasmonic graphene polyurethane nanocomposites for efficient solar water desalination10.1021/acsaem.8b00109 ↗
33. A bioinspired, reusable, paper-based system for high-performance large-scale evaporation10.1002/adma.201500135 ↗
34. High-performance large-scale solar steam generation with nanolayers of reusable biomimetic nanoparticles10.1002/adsu.201600013 ↗
35. Composition, structure and thermal degradation of hemp cellulose after chemical treatments10.1016/j.polymdegradstab.2005.01.016 ↗
36. Determination of the cellulose scission route in the hydrolytic and oxidative degradation of paper
37. All-ceramic solar-driven water purifier based on anodized aluminum oxide and plasmonic titanium nitride
38. High-absorption recyclable photothermal membranes used in a bionic system for high-efficiency solar desalination: via enhanced localized heating10.1039/C7TA06384A ↗
39. Flexible artificially-networked structure for ambient/high pressure solar steam generation10.1039/C6TA01205A ↗
40. Conductively monolithic polypyrrole 3-D porous architecture with micron-sized channels as superior salt-resistant solar steam generators10.1016/j.solmat.2019.110347 ↗
41. Waste reduction
42. Dry plasma reduction to synthesize supported platinum nanoparticles for flexible dye-sensitized solar cells10.1039/c3ta10319f ↗
43. Plasma-processed CoSn/RGO nanocomposite: a low-cost and sustainable counter electrode for dye-sensitized solar cells10.1016/j.solener.2020.03.057 ↗
44. Optimization of the PtFe alloy structure for application as an efficient counter electrode for dye-sensitized solar cells10.1016/j.electacta.2016.06.094 ↗
45. Characterization of surface chemistry of PtFe bimetallic nanoparticles10.1016/j.apsusc.2018.06.174 ↗
46. Energy band alignment at the heterointerface between a nanostructured TiO2layer and Au22(SG)18clusters: relevance to metal-cluster-sensitized solar cells10.1039/D0NR06662A ↗
47. Infrared optical properties of water and ice spheres10.1016/0019-1035(68)90083-3 ↗
48. Semiclassical approach to plasmon-electron coupling and Landau damping of surface plasmons10.1063/1.3575185 ↗
49. Solar-driven organic solvent purification enabled by the robust cubic Prussian blue10.1039/C9TA00798A ↗
50. Ultra-robust carbon fibers for multi-media purification: via solar-evaporation10.1039/C8TA08829B ↗
51. Catalysis by alloys in hydrocarbon reactions10.1016/S0360-0564(08)60440-X ↗
52. Pressions de vapeur et enthalpies libres d’exces de systemes binaires: hexamethylphosphorotriamide (HMPT) + n-hexane; n-heptane; n-octane: a 298,15 K; 303,15 K; 313,15 K; 323,15 K; 333,15 K, Thermochim
53. Mesure des pressions de vapeur d’hydrocarbures C10 A C18 n-alcanes etn-alkylbenzenes dans le domaine 3-1000 pascal, Thermochim