journal article·2016-12

Performance ratio study based on a device simulation of a 2D monolithic interconnected Cu(In,Ga)(Se,S)2 solar cell

Christian Schubbert, Patrick Eraerds, Michael Richter, Jürgen Parisi, Ingo Riedel, Thomas Dalibor, Jörg Palm

Publisher page

Abstract

Abstract We use a calibrated realistic 2D device simulation structure of a single cell from a monolithic interconnected Cu(In,Ga)(Se,S) 2 solar module to investigate the impact of modifications of the patterning laser scribe P1 and the trench properties on the energy yield. This particularly includes examining the change of the low light behaviour and the performance ratio (PR). In order to study the effects of the P1 characteristics, we performed a variation of the P1 width, the absorber doping concentration within the P1 trench as well as a variation of the Mo(Se,S) 2 band gap and the doping concentration. We simulated temperature-dependent current-voltage characteristics for different irradiances and apply the weather data of three different locations to calculate the PRs. An increased P1 width and decreased absorber doping concentration was found to increase the P1 (parallel) shunt resistance due to a reduced horizontal hole current component between the separated back electrodes. A higher shunt resistance enhances the low light behaviour of the solar cell and consequently leads to an improvement of the PR. A decreased Mo(Se,S) 2 band gap and doping concentration increases the valence band barrier at the Cu(In,Ga)(Se,S) 2 /Mo(Se,S) 2 interface and we obtained a moderate P1 shunt improvement accompanied by a strong PR enhancement. The increased barrier height enhanced the low light and temperature behaviour of the fill factor finally leading to the PR enhancement.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Electronic level alignment at the deeply buried absorber/Mo interface in chalcopyrite-based thin film solar cells10.1063/1.2955532 ↗
2. Laser processing in industrial solar module manufacturing10.2961/jlmn.2010.03.0001 ↗
3. A detailed study of monolithic contacts and electrical losses in a large-area thin-film module10.1002/pip.589 ↗
4. Study of the effect of gallium grading in Cu(In,Ga)Se210.1016/S0040-6090(99)00845-7 ↗
5. Band-gap grading in Cu(In,Ga)Se2 solar cells10.1016/j.jpcs.2005.09.087 ↗
6. General temperature dependence of solar cell performance and implications for device modelling10.1002/pip.496 ↗
7. Simulation of transport over heterojunctions
8. Thin-film solar cells: device measurements and analysis10.1002/pip.518 ↗
9. Monolithical serial interconnects of large CIS solar cells with picosecond laser pulses10.1016/j.phpro.2011.03.117 ↗
10. Numerical modelling of heterojunctions including the thermionic emission mechanism at the heterojunction interface
11. Electrical properties of the Cu(In,Ga)Se2/MoSe2/Mo structure10.1016/S0927-0248(00)00283-X ↗
12. G. Koishiyev, J. Sites, S. Kulkarni, N. Dhere, Determination of back contact barrier height in Cu(In(1−X)GaX)(Se(1−Y)SY)2 and CdTe solar cells, IEEE Proceeding paper 2008, pp. 1–3.10.1109/PVSC.2008.4922886 ↗
13. B. Litzenburger, S. Pingel, S. Janke, S. Held, R. Alam, Low light performance of solar cells and modules 29th PVSEC, Amsterdam, Netherlands. Prog. Photovolt.: Res. Appl., 2014.
14. Second generation CIS solar modules10.1016/j.solener.2004.05.011 ↗
15. PVSYST. 〈http://www.pvsyst.com/en/publications/meteo-data-sources〉, 2013.
16. Electronic properties of Cu(In,Ga)Se2 heterojunction solar cells – recent achievements, current understanding, and future challenges10.1007/s003390050984 ↗
17. Comprehensive simulation model for Cu(In,Ga)(S,Se)2 solar cells10.1016/j.solmat.2014.08.047 ↗
18. C. Schubbert, P. Eraerds, M. Richter, J. Parisi, I. Riedel, T. Dalibor, A. Avellán, Simulation of different interface configuration of Cu(In,Ga)(Se,S)2 solar cells 27th PVSEC, Frankfurt, Germany. Prog. Photovolt.: Res. Appl., 2012.
19. A simulation study on the impact of band gap profile variations and secondary barriers on the temperature behaviour, performance ratio and energy yield of Cu(In,Ga)(Se,S)2 solar cells
20. C. Schubbert, P. Eraerds, M. Richter, J. Parisi, I. Riedel, T. Dalibor, J. Palm, Anomalous temperature dependence of the open-circuit voltage of Cu(In,Ga)(Se,S)2 solar cells simulated in broad temperature range. Phys. Status Solidi A submitted in Jan. 2015. 2015.10.1002/pssa.201532534 ↗
21. A computer analysis of heterojunction and graded composition solar cells10.1109/T-ED.1977.18742 ↗
22. Synopsys. Synopsys sentaurus tcad. URL 〈https://www.synopsys.com/tools/tcad/Pages/default.aspx〉, 2013.
23. Sze · 2007
24. A.J. Waldau, M. Lux-Steiner, E. Bucher, Thin films of MoSe2 and WSe2 prepared by soft selenization as bulk material for solar cells. Preprint of the 10th European Photovoltaic Solar Energy Conference, 1991.