Compressed air concentrated solar pyrolysis furnace: A techno-environment-economic case study in Qinghai
Source abstract
Abstract
Biomass pyrolysis is widely implemented for production of bio-fuels due to its flexibility and renewability. However, conventional biomass pyrolysis is predominantly achieved via electrical heating, which mostly derives from non-renewable fossil fuels . Hence, this paper proposes a solar pyrolysis furnace to achieve heating from solar concentration via a solar parabolic dish . The energy provision is accomplished by a flow of solar heated compressed air inside metal coils wrapping around the pyrolysis tube. The conceptual design was conducted using Solidworks software with the numerical simulation performed with its Flow Simulation studio. The simulation results indicate that the proposed design is able to achieve operation temperature of more than 500 °C with a heating rate of 18.0 °C ∙ min -1 , which is comparable to commercially-available electrical furnaces. The available heat provision to the unit mass of biomass during pyrolysis is up to 1.24 MJ∙kg -1 . A case study in Qinghai was also performed to understand the economic and environmental performance of the proposed design where the results are promising. This work establishes the potential of the proposed concentrated solar furnace , from technical, environmental and economic perspectives, for wider applications, particularly for biomass pyrolysis in deriving clean energy and functional carbon materials.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Thermochemical Biomass Conversion Processes · Photovoltaic Systems and Sustainability · Energy and Environment Impacts
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (84)
Show source-provided references
1. Synthetic fuels from biomass using concentrated solar energy – a review10.1016/j.energy.2012.03.077 ↗
2. Characterization of bio-oil, syn-gas and bio-char from switchgrass pyrolysis at various temperatures10.1016/j.jaap.2011.11.010 ↗
3. Understanding the role of modeling and simulation in pyrolysis of biomass and waste plastics: a review
4. Biofuels production through biomass pyrolysis —a technological review10.3390/en5124952 ↗
5. The influence of lignocellulose on biomass pyrolysis product distribution and economics via steady state process simulation10.1016/j.jaap.2020.104968 ↗
6. 33 - control of hazardous air pollutants
7. A review of biomass pyrolysis gas: forming mechanisms, influencing parameters, and product application upgrades10.1016/j.fuel.2023.128461 ↗
8. Recent advances in biomass pyrolysis processes for bioenergy production: optimization of operating conditions10.3390/su151411238 ↗
9. Influence of lignocellulose and plant cell walls on biomass char morphology and combustion reactivity10.1016/j.biombioe.2018.10.011 ↗
10. Chapter 8 - conversion of solid wastes to fuels and chemicals through pyrolysis
11. An investigation on plant cell walls during biomass pyrolysis: a histochemical perspective on engineering applications10.1016/j.apenergy.2023.121055 ↗
12. Progress of the pyrolyzer reactors and advanced technologies for biomass pyrolysis processing10.3390/su131911061 ↗
13. Morphology and reactivity characteristics of char biomass particles10.1016/j.biortech.2011.01.071 ↗
14. Concentrating technologies with reactor integration and effect of process variables on solar assisted pyrolysis: a critical review
15. An overview of recent developments in biomass pyrolysis technologies10.3390/en11113115 ↗
16. Thermal effects investigation during biomass slow pyrolysis in a fixed bed reactor10.1016/j.biombioe.2019.05.010 ↗
17. Heat of wood pyrolysis10.1016/S0016-2361(02)00138-2 ↗
18. Hydrothermal carbonization coupled with pyrolysis: an innovative approach to digestate management10.1016/j.gerr.2023.100034 ↗
19. A review of pyrolysis technologies and the effect of process parameters on biocarbon properties10.3390/en16196936 ↗
20. Enthalpy changes during pyrolysis of biomass: interpretation of intraparticle gas sampling10.1016/j.apenergy.2018.07.061 ↗
21. Heterogeneous and homogeneous reactions of pyrolysis vapors from pine wood10.1002/aic.12799 ↗
22. Techno-economic analysis of fast pyrolysis of date palm waste for adoption in Saudi arabia10.3390/en14196048 ↗
23. Review of solar-biomass pyrolysis systems: focus on the configuration of thermal-solar systems and reactor orientation10.1016/j.jksues.2020.05.004 ↗
24. Production, upgradation and utilization of solar assisted pyrolysis fuels from biomass – a technical review10.1016/j.rser.2018.03.066 ↗
25. A review on prominent animal and municipal wastes as potential feedstocks for solar pyrolysis for biochar production10.1016/j.fuel.2022.123378 ↗
26. Shakya · 2007 · 78
27. Optimizing capacitance performance: solar pyrolysis of lignocellulosic biomass for homogeneous porosity in carbon production10.1016/j.jclepro.2024.141622 ↗
28. A review of concentrating solar thermal collectors with and without nanofluids10.1007/s10973-018-7183-1 ↗
29. 2023
30. Thermal and exergy performance of a nanofluid-based solar dish collector with spiral cavity receiver10.1016/j.applthermaleng.2018.02.070 ↗
31. Computational fluid dynamics on solar dish in a concentrated solar power: a bibliometric review
32. 2023
33. Modelling approaches to waste biomass pyrolysis: a review10.1016/j.renene.2020.05.110 ↗
34. Thermal enhancement of parabolic trough collector with internally finned absorbers10.1016/j.solener.2017.08.067 ↗
35. 2018
36. Performance of a low cost solar paraboloidal dish steam generating system10.1016/S0196-8904(99)00133-8 ↗
37. Exergetic investigation of a solar dish collector with smooth and corrugated spiral absorber operating with various nanofluids10.1016/j.jclepro.2017.11.004 ↗
38. Process optimization and technoeconomic environmental assessment of biofuel produced by solar powered microwave pyrolysis10.1038/s41598-022-16171-w ↗
39. Solar-powered microwave pyrolysis of corn stover for value-added products and process techno-economic assessment10.1002/er.6192 ↗
40. Techno-economic analysis of producing solid biofuels and biochar from forest residues using portable systems10.1016/j.apenergy.2018.10.076 ↗
41. Estimation of the heat required for intermediate pyrolysis of biomass10.1007/s10098-022-02391-1 ↗
42. Pyrolysis of coal and woody biomass under N2 and CO2 atmospheres using a drop tube furnace - experimental study and kinetic modeling10.1016/j.fuproc.2016.02.007 ↗
43. Design, simulation and optimization of a compound parabolic collector10.1016/j.seta.2016.04.005 ↗
44. Development of a low-cost dish solar concentrator and its application in zeolite desorption10.1016/j.renene.2005.11.007 ↗
45. Numerical comparison of a solar dish concentrator with different cavity receivers and working fluids10.1016/j.jclepro.2018.07.075 ↗
46. Experimental study of the energy and exergy performance for a pressurized volumetric solar receiver10.1016/j.applthermaleng.2016.05.075 ↗
47. High-temperature, point-focus, pressurised gas-phase solar receivers: a comprehensive review10.1016/j.enconman.2019.02.020 ↗
48. The optical efficiency of three different geometries of a small scale cavity receiver for concentrated solar applications10.1016/j.apenergy.2016.07.064 ↗
49. Parametric analysis of small scale cavity receiver with optimum shape for solar powered closed Brayton cycle applications10.1016/j.applthermaleng.2017.03.093 ↗
50. Numerical investigation of pitch value on thermal performance of solar receiver for solar powered Brayton cycle application10.1016/j.energy.2016.12.085 ↗
51. Analysis of wind flow around a parabolic collector (2) heat transfer from receiver tube10.1016/j.renene.2006.06.005 ↗
52. Emmissivity values. [cited 2023 Nov. 25th]; Available from: https://www.design1st.com/Design-Resource-Library/engineering_data/ThermalEmissivityValues.pdf.
53. Optical and thermal analysis of different cavity receiver designs for solar dish concentrators
54. Using CFD and ray tracing to estimate the heat losses of a tubular cavity dish receiver for different inclination angles10.1016/j.solener.2020.10.054 ↗
55. Investigation of a star flow insert in a parabolic trough solar collector10.1016/j.apenergy.2018.04.099 ↗
56. A hybrid parabolic trough solar collector system integrated with photovoltaics10.1016/j.apenergy.2022.120336 ↗
57. Coupled optical and thermal performance of a fin-like molten salt receiver for the next-generation solar power tower10.1016/j.apenergy.2020.115079 ↗
58. Comparative study of spiral and conical cavity receivers for a solar dish collector10.1016/j.enconman.2018.10.030 ↗
59. The efficiency of an open-cavity tubular solar receiver for a small-scale solar thermal Brayton cycle10.1016/j.enconman.2014.04.048 ↗
60. Combined optics and heat transfer numerical model of a solar conical receiver with built-in helical pipe10.1016/j.energy.2019.116775 ↗
61. White · 2011 · 347
62. Idelchik · 2007 · 483
63. Chhabra · 2018 · 67
64. Numerical investigation of a novel sinusoidal tube receiver for parabolic trough technology10.1016/j.apenergy.2018.02.177 ↗
65. Thermal enhancement of solar parabolic trough collectors by using nanofluids and converging-diverging absorber tube10.1016/j.renene.2016.03.062 ↗
66. Parabolic dish solar pyrolysis for bio-oil production: performance and energy analysis
67. Estimation of enthalpy of bio-oil vapor and heat required for pyrolysis of biomass10.1021/ef400199z ↗
68. Analysis of environmental impacts and energy derivation potential of biomass pyrolysis via Piper diagram10.1016/j.jaap.2020.104995 ↗
69. China's electricity emission intensity in 2020 – an analysis at provincial level10.1016/j.egypro.2017.12.421 ↗
70. 2024
71. Perry's chemical engineers' handbook
72. Shashi Menon, E., Chapter Three - Physical Properties, in Transmission Pipeline Calculations and Simulations Manual, E. Shashi Menon, Editor. 2015, Gulf Professional Publishing: Boston. p. 29-82.10.1016/B978-1-85617-830-3.00003-1 ↗
73. Parametric analysis and yearly performance of a trigeneration system driven by solar-dish collectors10.1002/er.4380 ↗
74. Design and development of a low-cost solar parabolic dish concentrator system with manual dual-axis tracking10.1002/er.6164 ↗
75. A simplified opto-thermal assessment and economic study of parabolic dish solar concentrator pondering on the receiver position induced uncertainties
76. Fabrication of a tubular furnace for sintering and heat treatment of metals/alloys10.1016/j.matpr.2020.04.222 ↗
77. 7 - parabolic-trough concentrating solar power (CSP) systems
78. Optimization of a solar-air source heat pump system in the high-cold and high-altitude area of China10.1016/j.energy.2023.126653 ↗
79. Potential solution to the sustainable ethanol production from industrial tail gas: an integrated life cycle and techno-economic analysis
80. Detailed analysis of gas, char and bio-oil products of oak wood pyrolysis at different operating conditions10.1007/s12649-022-01848-0 ↗
81. Thermodynamic and cost analysis of a solar dish power plant in Spain hybridized with a micro-gas turbine10.3390/en13195178 ↗
82. The performance prediction and techno-economic analyses of a stand-alone parabolic solar dish/stirling system, for Jamshoro, Pakistan10.1016/j.clet.2021.100064 ↗
83. Experimental performance and economic analysis of finned solar receiver for parabolic dish solar collector10.1016/j.heliyon.2023.e21236 ↗
84. Experimental investigation and parametric analysis of a solar thermal dish collector with spiral absorber10.1016/j.applthermaleng.2017.04.068 ↗