Preparation and study of quaternary molten salts for thermal energy storage applications
Source abstract
Abstract
The higher melting point and lower decomposition temperature of Hitec XL salt (45 % KNO 3-7% NaNO 3-48 % Ca(NO 3) 2) as a heat storage medium for commercial CSP plants limit applications. In this paper, a novel quaternary mixed molten salt, called HXLN, was prepared by using Hitec XL as the base salt and NaNO 2 as the modifying salt. The composition and phase change temperature of eutectic salt were predicted by Schroeder`s formula. Combined with the DSC results, the best mass ratios of the quaternary eutectic salt were jointly determined to be m(Hitec XL):m (NaNO 2) = 95:5, and the eutectic temperature was 70.2 °C. The eutectic HXLN salts were characterized by DSC, TGA, and XRD. The results showed that compared to Hitec XL salt, its melting point reduced by 42.2 °C, specific heat increased by 16.8 %, decomposition temperature increased by 43 °C, thermal conductivity increased by 9.4 %, and the sensible heat storage density in the liquid phase increased by 229.4 kJ/kg. The viscosity shows a significant decrease with increasing temperature. HXLN salt has higher high-temperature stability. HXLN salt has potential application prospects in fields such as solar thermal power plants and deep peak shaving of thermal power units.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. A review of high temperature (≥ 500 °C) latent heat thermal energy storage10.1016/j.rser.2022.112293 ↗
2. Review on the challenges of salt phase change materials for energy storage in concentrated solar power facilities10.1016/j.applthermaleng.2023.122034 ↗
3. State-of-the-art heat transfer fluids for parabolic trough collector10.1016/j.ijheatmasstransfer.2020.119541 ↗
4. Evaluation of thermal-physical properties of novel multicomponent molten nitrate salts for heat transfer and storage10.3390/en15186591 ↗
5. Development and characterization of a quaternary nitrate based molten salt heat transfer fluid for concentrated solar power plant10.1016/j.heliyon.2023.e16096 ↗
6. Experimental study of thermophysical properties and thermal stability of quaternary nitrate molten salts for thermal energy storage10.1016/j.solmat.2018.10.013 ↗
7. Phase diagram, thermodynamic properties and long-term isothermal stability of quaternary molten nitrate salts for thermal energy storage10.1016/j.solener.2021.12.020 ↗
8. Thermodynamic description of the quaternary Mg(NO3)2-KNO3-NaNO3-LiNO3 system and investigation on the novel Mg(NO3)2 based nitrate salts with low temperature10.1016/j.solmat.2021.111148 ↗
9. Comparative study on high temperature thermal stability of quaternary nitrate-nitrite mixed salt and Solar salt10.1016/j.solmat.2021.111197 ↗
10. Thermal storage of nitrate salts as phase change materials (PCMs)10.3390/ma14237223 ↗
11. Novel high specific heat capacity ternary nitrate/nitrite eutectic salt for solar thermal energy storage10.1016/j.solmat.2021.111075 ↗
12. Investigation on thermal performance of quinary nitrate/nitrite mixed molten salts with low melting point for thermal energy storage10.1016/j.solmat.2024.112803 ↗
13. Thermodynamic modeling of eutectic point in the LiNO3-NaNO3-KNO3 ternary system10.1007/s11669-012-0005-4 ↗
14. Novel low melting point quaternary eutectic system for solar thermal energy storage10.1016/j.apenergy.2012.09.001 ↗
15. Investigation on thermal performance of eutectic binary nitrate-carbonate molten salt under thermal shock condition10.1016/j.solmat.2023.112314 ↗
16. Preparation and comparative analysis of thermophysical properties on low melting point mixed nitrate molten salts
17. Advanced heat transfer fluids for direct molten salt line-focusing CSP plants10.1016/j.pecs.2018.02.002 ↗
18. Characterization and comparison of the thermophysical property of ternary and quaternary salt mixtures for solar thermal power plant applications
19. Thermal properties of 3-hydroxy fatty acids and their binary mixtures as phase change energy storage materials10.1002/er.4934 ↗
20. Thermophysical properties of Ca(NO3)2-NaNO3-KNO3 mixtures for heat transfer and thermal storage10.1016/j.solener.2017.02.033 ↗
21. Assessment of novel inorganic storage medium with low melting point10.1016/j.egypro.2015.03.186 ↗
22. Cloning polymer single crystals through self-seeding10.1038/nmat2405 ↗
23. Comprehensive performance of composite phase change materials based on ternary eutectic chloride with CuO nanoparticles for thermal energy storage systems10.1016/j.solener.2022.12.051 ↗
24. A review of eutectic salts as phase change energy storage materials in the context of concentrated solar power10.1016/j.ijheatmasstransfer.2023.123904 ↗
25. Simulation-assisted determination of the minimum melting temperature composition of MgCl2-KCl-NaCl salt mixture for next-generation molten salt thermal energy storage10.3389/fenrg.2022.809663 ↗
26. Design and development of nitrate-nitrite based molten salts for concentrating solar power applications10.1016/j.solener.2019.06.010 ↗
27. Iop. Effect of lithium nitrate and calcium nitrate composition on the thermal properties of quaternary molten salts mixture for heat transfer application
28. Recent advances in molten salt-based nanofluids as thermal energy storage in concentrated solar power: a comprehensive review10.3390/ma17040955 ↗
29. Ca(NO3)2-NaNO3-KNO3 molten salt mixtures for direct thermal energy storage systems in parabolic trough plants10.1115/1.4023182 ↗
30. Homogeneous molten salt formulations as thermal energy storage media and heat transfer fluid10.1016/j.est.2022.104200 ↗
31. Review on concentrating solar power plants and new developments in high temperature thermal energy storage technologies10.1016/j.rser.2015.09.026 ↗
32. Preparation and thermal properties of quaternary mixed nitrate with low melting point10.1016/j.solmat.2014.03.056 ↗