Relative angular response characterization in VIPV
Source abstract
Abstract
VIPV surfaces operate predominantly under non-normal irradiance conditions, underscoring the importance of understanding their angular performance for energy modeling in this technology. However, vehicle surfaces require double curvature for aesthetic and aerodynamic reasons, causing their angular response to deviate from conventional flat plates. This paper addresses the study and characterization of the angular performance of curved VIPV surfaces. A quasi-commercial VIPV module was measured indoors using a collimated beam solar simulator and a two-axis rotating structure. Furthermore, outdoor characterization under real sunlight was also performed by installing the VIPV module on a two-axis tracker. The solar tracker control has been programmed to introduce fixed misalignments between the aperture plane of the assembly and the solar disk. This feature allows measuring the IV curve of the modules under various angles of incidence, limited only by the angular range of the tracker (±60°). The two-dimensional angular responses measured both indoors and outdoors are compared and discussed. In addition, simulations based on optical ray-tracing to determine the irradiance distribution on the module surface and a SPICE electrical model to calculate the IV curves were conducted and validated with the experimental results. The opto-electrical models were then used to explore several cell interconnections and analyze the impact on the angular response.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Iterative Learning Control Systems · Mechanical Engineering and Vibrations Research · Real-time simulation and control systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Importance of developing high-efficiency solar cells for PV-powered vehicles
2. How did the knowledge of CPV contribute to the standardization activity of VIPV?
3. On the optimization of the interconnection of photovoltaic modules integrated in vehicles10.1016/j.isci.2024.110089 ↗
4. On the effect of cell interconnection in Vehicle Integrated Photovoltaics: modelling energy under different scenarios
5. Losses caused by dispersion of optical parameters and misalignments in PV concentrators10.1002/pip.582 ↗
6. 2020 · vol. 18
7. Collimated solar simulator for curved PV modules characterization10.1016/j.solmat.2023.112418 ↗
8. Curve correction of the energy yield by flexible photovoltaics for VIPV and BIPV applications using a simple correction factor
9. Curve correction of vehicle‐integrated photovoltaics using statistics on commercial car bodies10.1002/pip.3473 ↗
10. Indoor and outdoor evaluation of curved modules for VIPV
11. Calculation of the PV modules angular losses under field conditions by means of an analytical model10.1016/S0927-0248(00)00408-6 ↗
12. Determination of the optimum orientations for the double exposure flat-plate collector and its reflections10.1016/0038-092X(66)90004-1 ↗
13. King · 2004
14. Improvement and validation of a model for photovoltaic array performance10.1016/j.solener.2005.06.010 ↗
15. Sun-relative pointing for dual-Axis solar trackers employing azimuth and elevation rotations10.1115/1.4029379 ↗
16. Sinton · 2006
17. Constant voltage I–V curve flash tester for solar cells10.1016/j.solmat.2003.11.001 ↗
18. Understanding the impact of sky diffuse irradiance on curved photovoltaic modules10.1016/j.solmat.2024.113029 ↗